linux-toradex.git/drivers/usb/serial/keyspan.c, branch v3.0.8

Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2011-03-16T22:11:04+00:00

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)

USB: serial: keyspan: Fix possible null pointer dereference.

2011-02-25T19:33:01+00:00

Signed-off-by: Huzaifa Sidhpurwala 
Signed-off-by: Greg Kroah-Hartman

tiocmset: kill the file pointer argument

2011-02-17T19:52:43+00:00

Doing tiocmget was such fun we should do tiocmset as well for the same
reasons

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

tiocmget: kill off the passing of the struct file

2011-02-17T19:47:33+00:00

We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

Update broken web addresses in the kernel.

2010-10-18T09:03:14+00:00

The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock 
Cc: Maciej W. Rozycki 
Cc: Geert Uytterhoeven 
Cc: Finn Thain 
Cc: Randy Dunlap 
Cc: Matt Turner 
Cc: Dimitry Torokhov 
Cc: Mike Frysinger 
Acked-by: Ben Pfaff 
Acked-by: Hans J. Koch 
Reviewed-by: Finn Thain 
Signed-off-by: Jiri Kosina

USB: remove references to port->port.count from the serial drivers

2010-03-02T22:55:12+00:00

This patch (as1344) removes references to port->port.count from the
USB serial drivers.  Now that serial ports are properly reference
counted, port.count checking is unnecessary and incorrect.  Drivers
should assume that the port is in use from the time the open method
runs until the close method is called.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

tty: USB does not need the filp argument in the drivers

2009-09-19T20:13:26+00:00

And indeed none of them use it. Clean this up as it will make moving to a
standard open method rather easier.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

USB: usb-serial: replace shutdown with disconnect, release

2009-06-16T04:44:47+00:00

This patch (as1254) splits up the shutdown method of usb_serial_driver
into a disconnect and a release method.

The problem is that the usb-serial core was calling shutdown during
disconnect handling, but drivers didn't expect it to be called until
after all the open file references had been closed.  The result was an
oops when the close method tried to use memory that had been
deallocated by shutdown.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

tty: Bring the usb tty port structure into more use

2009-06-11T15:50:56+00:00

This allows us to clean stuff up, but is probably also going to cause
some app breakage with buggy apps as we now implement proper POSIX behaviour
for USB ports matching all the other ports. This does also mean other apps
that break on USB will now work properly.

Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

USB: drivers: use USB API functions rather than constants

2009-03-24T23:20:28+00:00

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// 
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include 

@depends on !inc && (r1||r5)@
@@

+ #include 
  #include 
// 

Signed-off-by: Julia Lawall 
Signed-off-by: Greg Kroah-Hartman