linux-toradex.git/drivers/usb/serial/pl2303.h, branch v3.10.43

USB: pl2303: add ids for Hewlett-Packard HP POS pole displays

2014-05-06T14:55:33+00:00

commit b16c02fbfb963fa2941b7517ebf1f8a21946775e upstream.

Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays:

LD960: 03f0:0B39
LCM220: 03f0:3139
LCM960: 03f0:3239

[ Johan: fix indentation and sort PIDs numerically ]

Signed-off-by: Aaron Sanders 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: rm duplicate id

2011-11-15T18:06:15+00:00

I get report from customer that his usb-serial
converter doesn't work well,it sometimes work,
but sometimes it doesn't.

The usb-serial converter's id:
vendor_id product_id
0x4348    0x5523

Then I search the usb-serial codes, and there are
two drivers announce support this device, pl2303
and ch341, commit 026dfaf1 cause it. Through many
times to test, ch341 works well with this device,
and pl2303 doesn't work quite often(it just work quite little).

ch341 works well with this device, so we doesn't
need pl2303 to support.I try to revert 026dfaf1 first,
but it failed. So I prepare this patch by hand to revert it.

Signed-off-by: Wang YanQing 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: pl2303: add id for SMART device

2011-09-26T22:34:50+00:00

Add vendor and product ID for the SMART USB to serial adapter. These
were meant to be used with their SMART Board whiteboards, but can be
re-purposed for other tasks. Tested and working (at at least 9600 bps).

Signed-off-by: Eric Benoit 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: serial: add IDs for WinChipHead USB->RS232 adapter

2011-07-19T11:48:45+00:00

Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with
Prolifec PL2303 chipset

Signed-off-by: Wolfgang Denk 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

drivers: update to pl2303 usb-serial to support Motorola cables

2011-01-23T02:44:38+00:00

Added 0x0307 device id to support Motorola cables to the pl2303 usb
serial driver. This cable has a modified chip that is a pl2303, but
declares itself as 0307. Fixed by adding the right device id to the
supported devices list, assigning it the code labeled
PL2303_PRODUCT_ID_MOTOROLA.

Signed-off-by: Dario Lombardo 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: pl2303: New vendor and product id

2010-08-24T03:50:15+00:00

Add support for the Zeagle N2iTiON3 dive computer interface. Since
Zeagle devices are actually manufactured by Seiko, this patch will
support other Seiko based models as well.

Signed-off-by: Jef Driesen 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: pl2303.h: checkpatch cleanups

2010-05-20T20:21:47+00:00

Minor whitespace cleanups to make checkpatch happy.

Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: Hybrid reader Uniform HCR331

2010-04-30T16:25:10+00:00

I tried a magnetic stripe reader
(http://www.kimaldi.com/kimaldi_eng/productos/lectores_de_tarjetas/lectores_tarjeta_chip_y_dni/lector_hibrido_uniform_hcr_331)
and I see that it is interfaced with a PL2303. I wrote a patch to use
your driver which simply adds the product ID for the device and it
seems working fine.


From: Simone Contini 
Signed-off-by: Greg Kroah-Hartman

USB: pl2303: add AdLink ND-6530 USB IDs

2010-04-22T22:18:25+00:00

I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485
isolated adapter is actually a PL2303 based usb serial adapter. I
tried it out, and as far as I can tell it works.

Signed-off-by: Manuel Jander 
Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: new hardware support - sanwa multimeter

2009-09-23T13:46:15+00:00

I'd like to present my small patch enabling to use Sanwa PC5000
mulitimeter with linux.

Signed-off-by: Pawel Ludwikow 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman