Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8f01806906f7d7b1a1424b9afddebc443. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: Clark Rawlins <clark.rawlins@escient.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes a bug/inconsistency revealed by the additional sanity checking in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 introduced in the original 2.6.24 branch. The Handspring Visor / PalmOS 4 device structure defines .num_bulk_out=2 but the usb-serial probe returns num_bulk_out=3, triggering the check in the above commit and forcing a bail out when the device (a Garmin iQue in my case) attempts to connect. The patch bumps the expected number of endpoints to 3. FWIW, this patch will probably solve the following kernel bug report for Treo users (identical symptoms, different model PalmOS units): <http://bugzilla.kernel.org/show_bug.cgi?id=10118> Signed-off-by: Brad Sawatzky <brad+kernel@swatter.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Tested-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The changes introduced in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: Robert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for the MC8775 device to the sierra driver. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
while I was adding autosuspend to that driver I noticed a few issues. You were having DMAed buffers as a part of a structure. This will fail on platforms that are not DMA-coherent (arm, sparc, ppc, ...) Please test this patch to fix it. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This updates the option driver with a lot more novatel driver ids. From: Dirk DeSchepper <ddeschepper@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723. In my case, this Powercom BNT800AP. Signed-off-by: Dmitry Shapin <shapin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>