linux-toradex.git/drivers/usb/serial, branch v3.0.97

USB: mos7720: fix big-endian control requests

2013-09-26T23:52:46+00:00

commit 3b716caf190ccc6f2a09387210e0e6a26c1d81a4 upstream.

Fix endianess bugs in parallel-port code which caused corrupt
control-requests to be issued on big-endian machines.

Reported-by: kbuild test robot 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: mos7720: use GFP_ATOMIC under spinlock

2013-09-26T23:52:46+00:00

commit d0bd9a41186e076ea543c397ad8a67a6cf604b55 upstream.

The write_parport_reg_nonblock() function shouldn't sleep because it's
called with spinlocks held.

Signed-off-by: Dan Carpenter 
Acked-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: mos7720: fix broken control requests

2013-08-20T15:21:01+00:00

commit ef6c8c1d733e244f0499035be0dabe1f4ed98c6f upstream.

The parallel-port code of the drivers used a stack allocated
control-request buffer for asynchronous (and possibly deferred) control
requests. This not only violates the no-DMA-from-stack requirement but
could also lead to corrupt control requests being submitted.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add more RT Systems ftdi devices

2013-08-04T07:43:40+00:00

commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream.

RT Systems makes many usb serial cables based on the ftdi_sio driver for
programming various amateur radios.  This patch is a full listing of
their current product offerings and should allow these cables to all
be recognized.

Signed-off-by: Rick Farina (Zero_Chaos) 
Signed-off-by: Greg Kroah-Hartman

USB: ti_usb_3410_5052: fix dynamic-id matching

2013-08-04T07:43:34+00:00

commit 1fad56424f5ad3ce4973505a357212b2e2282b3f upstream.

The driver failed to take the dynamic ids into account when determining
the device type and therefore all devices were detected as 2-port
devices when using the dynamic-id interface.

Match on the usb-serial-driver field instead of doing redundant id-table
searches.

Reported-by: Anders Hammarquist 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: cp210x support SEL C662 Vendor/Device

2013-07-28T23:18:48+00:00

commit b579fa52f6be0b4157ca9cc5e94d44a2c89a7e95 upstream.

This patch adds support for the Schweitzer Engineering Laboratories
C662 USB cable based off the CP210x driver.

Signed-off-by: Barry Grussling 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: add MMB and PI ZigBee USB Device Support

2013-07-28T23:18:47+00:00

commit 7681156982026ebf7eafd7301eb0374d7648d068 upstream.

Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB
devices using customized Silicon Labs' CP210x.c USB to UART bridge
drivers with PIDs: 88A4, 88A5.

Signed-off-by: Sami Rahman 
Tested-by: Sami Rahman 
Signed-off-by: Greg Kroah-Hartman

usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter

2013-07-28T23:18:47+00:00

commit 90625070c4253377025878c4e82feed8b35c7116 upstream.

This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series
USB ID (0846:0110) to the cp210x driver. Without this, the serial
adapter is not recognized in Linux. Description was obtained from
an Netgear Eng.

Signed-off-by: Luiz Angelo Daros de Luca 
Signed-off-by: Greg Kroah-Hartman

usb: serial: option: Add ONYX 3G device support

2013-07-28T23:18:46+00:00

commit 63b5df963f52ccbab6fabedf05b7ac6b465789a4 upstream.

This patch adds support for the ONYX 3G device (version 1) from ALFA
NETWORK.

Signed-off-by: Enrico Mioso 
Signed-off-by: Greg Kroah-Hartman

USB: option: add D-Link DWM-152/C1 and DWM-156/C1

2013-07-28T23:18:46+00:00

commit ca24763588844b14f019ffc45c7df6d9e8f932c5 upstream.

Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices.

DWM-152/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e01 Rev= 0.00
S:  Product=USB Configuration
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

DWM-156/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e02 Rev= 0.00
S:  Product=DataCard Device
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Alexandr Ivanov 
Signed-off-by: Greg Kroah-Hartman