linux-toradex.git/drivers/usb/serial, branch v3.1.2

USB: option: add various ZTE device network interfaces to the blacklist

2011-11-11T17:42:41+00:00

commit c58a76cdd7ab5a945a44fd2d64f6faf40323f95b upstream.

IDs found in the Windows driver's ZTEusbnet.inf file from the
ZTE MF100 drivers (O2 UK).  Also fixes the ZTE MF626 device
since it really is distinct from the 4G Systems stick and
apparently needs the net interface blacklisted too, while
there's no indication (yet) that the 4G Systems stick does.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: option: add ZTE product 0x0037 to sendsetup blacklist

2011-11-11T17:42:41+00:00

commit eb05ce567a81c592c58f4bdb96eb91ce96661c30 upstream.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist

2011-11-11T17:42:40+00:00

commit 0d905fd5ece4ab65e8407c450077744e1c8f661b upstream.

That's what the blacklist is for...

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: option: convert interface blacklisting to bitfields

2011-11-11T17:42:40+00:00

commit b4626c10928c13ee73b013dcbc23676333e79b59 upstream.

It's cleaner than the array stuff, and we're about to add a bunch
more blacklist entries.  Second, there are devices that need both
the sendsetup and the reserved interface blacklists, which the
current code can't accommodate.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board

2011-11-11T17:42:39+00:00

commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream.

Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard,
and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger
Interface Board. The ICDI board can also be used stand-alone, for
other boards and chips than the kit it came with. The ICDI has both
old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm
pitch connector.

Tested with EK-LM3S9B90, where the BD-ICDI board is included.

Signed-off-by: Peter Stuge 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: add PID for Sony Ericsson Urban

2011-11-11T17:42:39+00:00

commit 74bdf22b5c3858b06af46f19d05c23e76c40a3bb upstream.

Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban

Signed-off-by: Hakan Kvist 
Signed-off-by: Oskar Andero 
Signed-off-by: Greg Kroah-Hartman

USB: pl2303: add id for SMART device

2011-11-11T17:42:38+00:00

commit 598f0b703506da841d3459dc0c48506be14d1778 upstream.

Add vendor and product ID for the SMART USB to serial adapter. These
were meant to be used with their SMART Board whiteboards, but can be
re-purposed for other tasks. Tested and working (at at least 9600 bps).

Signed-off-by: Eric Benoit 
Signed-off-by: Greg Kroah-Hartman

USB: qcserial: add device ID for "HP un2430 Mobile Broadband Module"

2011-11-11T17:42:17+00:00

commit 1bfac90d1b8e63a4d44158c3445d8fda3fb6d5eb upstream.

add device ID for "HP un2430 Mobile Broadband Module"

Signed-off-by: Rigbert Hamisch 
Signed-off-by: Greg Kroah-Hartman

USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000

2011-11-11T17:42:17+00:00

commit 68c79e5756903229fa96826a2493c2265a3b395f upstream.

Simple patch to make qcserial recognize the USB id of the Sierra
Wireless MC8355 which is based on the Gobi 3000 chip.

Both UMTS and GPS work fine.

Signed-off-by: Richard Hartmann 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: add Calao reference board support

2011-08-25T16:44:50+00:00

Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and
port 1 for the UART

They use the same VID and PID as FTDI Chip but they program the manufacturer
name in the eeprom

So use this information to detect it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD 
Cc: Gregory Hermant 
Cc: Alan Cox 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman