linux-toradex.git/drivers/usb/serial, branch v3.2.11

USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id

2012-03-01T00:31:06+00:00

commit 7fd25702ba616d9ba56e2a625472f29e5aff25ee upstream.

This USB-serial cable with mini stereo jack enumerates as:
Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care

It is a TI3410 inside.

Signed-off-by: Andrew Lunn 
Signed-off-by: Greg Kroah-Hartman

USB: option: cleanup zte 3g-dongle's pid in option.c

2012-03-01T00:31:05+00:00

commit b9e44fe5ecda4158c22bc1ea4bffa378a4f83f65 upstream.

  1. Remove all old mass-storage ids's pid:
     0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160;
  2. As the pid from 0x1401 to 0x1510 which have not surely assigned to
     use for serial-port or mass-storage port,so i think it should be
     removed now, and will re-add after it have assigned in future;
  3. sort the pid to WCDMA and CDMA.

Signed-off-by: Rui li 
Signed-off-by: Greg Kroah-Hartman

USB: Added Kamstrup VID/PIDs to cp210x serial driver.

2012-03-01T00:31:05+00:00

commit c6c1e4491dc8d1ed2509fa6aacffa7f34614fc38 upstream.

Signed-off-by: Bruno Thomsen 
Signed-off-by: Greg Kroah-Hartman

USB: add new zte 3g-dongle's pid to option.c

2012-02-13T19:17:04+00:00

commit 1608ea5f4b5d6262cd6e808839491cfb2a67405a upstream.

As ZTE have and will use more pid for new products this year,
so we need to add some new zte 3g-dongle's pid on option.c ,
and delete one pid 0x0154 because it use for mass-storage port.

Signed-off-by: Rui li 
Signed-off-by: Greg Kroah-Hartman

USB: usbserial: add new PID number (0xa951) to the ftdi driver

2012-02-13T19:17:03+00:00

commit 90451e6973a5da155c6f315a409ca0a8d3ce6b76 upstream.

Signed-off-by: Milan Kocian 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: allow more baud rates above 1Mbaud

2012-02-03T17:22:27+00:00

commit d1620ca9e7bb0030068c3b45b653defde8839dac upstream.

Allow more baud rates to be set in [1M,2M] baud.

Signed-off-by: Johan Hovold 
Cc: Preston Fick 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: initialise baud rate at open

2012-02-03T17:22:26+00:00

commit cdc32fd6f7b2b2580d7f1b74563f888e4dd9eb8a upstream.

The newer cp2104 devices require the baud rate to be initialised after
power on. Make sure it is set when port is opened.

Signed-off-by: Johan Hovold 
Cc: Preston Fick 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: clean up, refactor and document speed handling

2012-02-03T17:22:25+00:00

commit e5990874e511d5bbca23b3396419480cb2ca0ee7 upstream.

Clean up and refactor speed handling.
Document baud rate handling for CP210{1,2,4,5,10}.

Signed-off-by: Johan Hovold 
Cc: Preston Fick 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: fix up set_termios variables

2012-02-03T17:22:24+00:00

commit 34b76fcaee574017862ea3fa0efdcd77a9d0e57d upstream.

[Based on a patch from Johan, mangled by gregkh to keep things in line]

Fix up the variable usage in the set_termios call.

Signed-off-by: Johan Hovold 
Cc: Preston Fick 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: do not map baud rates to B0

2012-02-03T17:22:23+00:00

commit be125d9c8d59560e7cc2d6e2b65c8fd233498ab7 upstream.

We do not implement B0 hangup yet so map low baudrates to 300bps.

Signed-off-by: Johan Hovold 
Cc: Preston Fick 
Signed-off-by: Greg Kroah-Hartman