linux-toradex.git/drivers/usb/serial, branch v4.4.73

USB: serial: io_ti: fix div-by-zero in set_termios

2017-05-25T12:30:13+00:00

commit 6aeb75e6adfaed16e58780309613a578fe1ee90b upstream.

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: mct_u232: fix big-endian baud-rate handling

2017-05-25T12:30:13+00:00

commit 26cede343656c0bc2c33cdc783771282405c7fb2 upstream.

Drop erroneous cpu_to_le32 when setting the baud rate, something which
corrupted the divisor on big-endian hosts.

Found using sparse:

	warning: incorrect type in argument 1 (different base types)
	    expected unsigned int [unsigned] [usertype] val
	    got restricted __le32 [usertype] 

Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap")
Reviewed-by: Greg Kroah-Hartman 
Acked-By: Pete Zaitcev 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add more Lenovo EM74xx device IDs

2017-05-25T12:30:13+00:00

commit 8d7a10dd323993cc40bd37bce8bc570133b0c396 upstream.

In their infinite wisdom, and never ending quest for end user frustration,
Lenovo has decided to use new USB device IDs for the wwan modules in
their 2017 laptops.  The actual hardware is still the Sierra Wireless
EM7455 or EM7430, depending on region.

Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: serial: option: add Telit ME910 support

2017-05-25T12:30:13+00:00

commit 40dd46048c155b8f0683f468c950a1c107f77a7c upstream.

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

2017-05-25T12:30:11+00:00

commit 5f63424ab7daac840df2b12dd5bcc5b38d50f779 upstream.

This patch adds support for recognition of ARM-USB-TINY(H) devices which
are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
and serial console.

By suggestion from Johan Hovold it is possible to replace
ftdi_jtag_quirk with a bit more generic construction. Since all
Olimex-ARM debuggers has exactly two ports, we could safely always use
only second port within the debugger family.

Signed-off-by: Andrey Korolyov 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: fix setting latency for unprivileged users

2017-05-25T12:30:11+00:00

commit bb246681b3ed0967489a7401ad528c1aaa1a4c2e upstream.

Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") enables unprivileged users to set the FTDI latency timer,
but there was a logic flaw that skipped sending the corresponding
USB control message to the device.

Specifically, the device latency timer would not be updated until next
open, something which was later also inadvertently broken by commit
c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port
probe").

A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme
low-latency setting") disabled the low-latency mode by default so we now
need this fix to allow unprivileged users to again enable it.

Signed-off-by: Anthony Mallet 
[johan: amend commit message]
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe").
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit

2017-05-20T12:26:58+00:00

commit 31c5d1922b90ddc1da6a6ddecef7cd31f17aa32b upstream.

This development kit has an FT4232 on it with a custom USB VID/PID.
The FT4232 provides four UARTs, but only two are used. The UART 0
is used by the FlashPro5 programmer and UART 2 is connected to the
SmartFusion2 CortexM3 SoC UART port.

Note that the USB VID is registered to Actel according to Linux USB
VID database, but that was acquired by Microsemi.

Signed-off-by: Marek Vasut 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: io_edgeport: fix descriptor error handling

2017-05-14T11:32:57+00:00

commit 3c0e25d883d06a1fbd1ad35257e8abaa57befb37 upstream.

Make sure to detect short control-message transfers and log an error
when reading incomplete manufacturer and boot descriptors.

Note that the default all-zero descriptors will now be used after a
short transfer is detected instead of partially initialised ones.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: mct_u232: fix modem-status error handling

2017-05-14T11:32:57+00:00

commit 36356a669eddb32917fc4b5c2b9b8bf80ede69de upstream.

Make sure to detect short control-message transfers so that errors are
logged when reading the modem status at open.

Note that while this also avoids initialising the modem status using
uninitialised heap data, these bits could not leak to user space as they
are currently not used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: quatech2: fix control-message error handling

2017-05-14T11:32:57+00:00

commit 8c34cb8ddfe808d557b51da983ff10c02793beb2 upstream.

Make sure to detect short control-message transfers when fetching
modem and line state in open and when retrieving registers.

This specifically makes sure that an errno is returned to user space on
errors in TIOCMGET instead of a zero bitmask.

Also drop the unused getdevice function which also lacked appropriate
error handling.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman