linux-toradex.git/drivers/usb/serial, branch v4.9.110

USB: serial: cp210x: use tcflag_t to fix incompatible pointer type

2018-06-06T14:44:32+00:00

commit 009615ab7fd4e43b82a38e4e6adc5e23c1ee567f upstream.

On sparc32, tcflag_t is unsigned long, unlike all other architectures:

    drivers/usb/serial/cp210x.c: In function 'cp210x_get_termios':
    drivers/usb/serial/cp210x.c:717:3: warning: passing argument 2 of 'cp210x_get_termios_port' from incompatible pointer type
       cp210x_get_termios_port(tty->driver_data,
       ^
    drivers/usb/serial/cp210x.c:35:13: note: expected 'unsigned int *' but argument is of type 'tcflag_t *'
     static void cp210x_get_termios_port(struct usb_serial_port *port,
		 ^

Consistently use tcflag_t to fix this.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Johan Hovold 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: adding support for ublox R410M

2018-05-09T07:50:23+00:00

commit 4205cb01f6e9ef2ae6daa7be4e8ac1edeb4c9d64 upstream.

This patch adds support for ublox R410M PID 0x90b2 USB modem to option
driver, this module supports LTE Cat M1 / NB1.

Interface layout:
0: QCDM/DIAG
1: ADB
2: AT
3: RMNET

Signed-off-by: SZ Lin (林上智) 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: reimplement interface masking

2018-05-09T07:50:23+00:00

commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.

Reimplement interface masking using device flags stored directly in the
device-id table. This will make it easier to add and maintain device-id
entries by using a more compact and readable notation compared to the
current implementation (which manages pairs of masks in separate
blacklist structs).

Two convenience macros are used to flag an interface as either reserved
or as not supporting modem-control requests:

	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
	  .driver_info = NCTRL(0) | RSVD(3) },

For now, we limit the highest maskable interface number to seven, which
allows for (up to 16) additional device flags to be added later should
need arise.

Note that this will likely need to be backported to stable in order to
make future device-id backports more manageable.

Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: visor: handle potential invalid device configuration

2018-05-09T07:50:23+00:00

commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.

If we get an invalid device configuration from a palm 3 type device, we
might incorrectly parse things, and we have the potential to crash in
"interesting" ways.

Fix this up by verifying the size of the configuration passed to us by
the device, and only if it is correct, will we handle it.

Note that this also fixes an information leak of slab data.

Reported-by: Andrey Konovalov 
Reviewed-by: Andrey Konovalov 
Signed-off-by: Greg Kroah-Hartman 
[ johan: add comment about the info leak ]
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: Add support for Quectel EP06

2018-05-09T07:50:19+00:00

commit 71a0483d56e784b1e11f38f10d7e22d265dbe244 upstream.

The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as
follows:

0: Diag
1: NMEA
2: AT
3: Modem

Interface 4 is QMI and interface 5 is ADB, so they are blacklisted.

This patch should also be considered for -stable. The QMI-patch for this
modem is already in the -stable-queue.

v1->v2:
* Updated commit prefix (thanks Johan Hovold)
* Updated commit message slightly.

Signed-off-by: Kristian Evensen 
Acked-by: Johan Hovold 
Cc: Bjørn Mork 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add ID for NI USB serial console

2018-05-01T22:13:04+00:00

commit 1e23aace21515a8f7615a1de016c0ea8d4e0cc6e upstream.

Added the USB VID and PID for the USB serial console on some National
Instruments devices.

Signed-off-by: Kyle Roeschley 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster

2018-05-01T22:13:04+00:00

commit 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream.

Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID
(0x0403) and product ID (0x6010) as the "original" FTDI device.

This patch avoids picking up by ftdi_sio of the first interface of this
USB device. After that this device can be used by Arrow user-space JTAG
driver.

Signed-off-by: Vasyl Vavrychuk 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: simple: add libtransistor console

2018-05-01T22:13:04+00:00

commit fe710508b6ba9d28730f3021fed70e7043433b2e upstream.

Add simple driver for libtransistor USB console.
This device is implemented in software:
https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.c

Signed-off-by: Collin May 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add ELDAT Easywave RX09 id

2018-04-08T10:12:56+00:00

commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream.

Add device id for ELDAT Easywave RX09 tranceiver.

Reported-by: Jan Jansen 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator

2018-04-08T10:12:56+00:00

commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream.

Add device id for Harman FirmwareHubEmulator to make the device
auto-detectable by the driver.

Signed-off-by: Clemens Werther 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman