The timeout argument to usb_stor_control_msg() is specified in jiffies, not
milliseconds.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit bda9893c50fb56253d3c206c14e3f933e5f68b3c as it was
incorrect.

Reported-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These drives hang when receiving ATA12 commands, so set the US_FL_NO_ATA_1X
quirk to filter these out.

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions fw5895_init() and config_autodelink_before_power_down() are used
only when CONFIG_PM is defined.

drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function]
drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function]

Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just like some Seagate enclosures, these devices do not seem to grok ata
pass through commands.

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These drives hang when receiving ATA12 commands, so set the US_FL_NO_ATA_1X
quirk to filter these out.

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes mass-storage devices using the Bulk-only transport will
mistakenly skip the data phase of a command.  Rather than sending the
data expected by the host or sending a zero-length packet, they go
directly to the status phase and send the CSW.

This causes problems for usb-storage, for obvious reasons.  The driver
will interpret the CSW as a short data transfer and will wait to
receive a CSW.  The device won't have anything left to send, so the
command eventually times out.

The SCSI layer doesn't retry commands after they time out (this is a
relatively recent change).  Therefore we should do our best to detect
a skipped data phase and handle it promptly.

This patch adds code to do that.  If usb-storage receives a short
13-byte data transfer from the device, and if the first four bytes of
the data match the CSW signature, the driver will set the residue to
the full transfer length and interpret the data as a CSW.

This fixes Bugzilla #86611.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Tested-by: Paul Osmialowski <newchief@king.net.pl>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 3.18-rc1.  Also in here is the PHY
  tree, as it seems to fit well with the USB tree for various reasons...

  Anyway, lots of little changes in here, all over the place, full
  details in the changelog

  All have been in the linux-next tree for a while with no issues"

* tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits)
  USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST'
  uas: Reduce number of function arguments for uas_alloc_foo functions
  xhci: Allow xHCI drivers to be built as separate modules
  xhci: Export symbols used by host-controller drivers
  xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold
  xhci: Introduce xhci_init_driver()
  usb: hcd: add generic PHY support
  usb: rename phy to usb_phy in HCD
  usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo
  USB: host: st: fix ehci/ohci driver selection
  usb: host: ehci-exynos: Remove unnecessary usb-phy support
  usb: core: return -ENOTSUPP for all targeted hosts
  USB: Remove .owner field for driver
  usb: core: log higher level message on malformed LANGID descriptor
  usb: Add LED triggers for USB activity
  usb: Rename usb-common.c
  usb: gadget: Refactor request completion
  usb: gadget: Introduce usb_gadget_giveback_request()
  usb: dwc2/gadget: move phy bus legth initialization
  phy: remove .owner field for drivers using module_platform_driver
  ...

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (megaraid_sas,
  arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
  assorted fixes and miscellaneous updates (including the
  pci_msix_enable_range() changes that have been pending for a while)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits)
  scsi: add a CONFIG_SCSI_MQ_DEFAULT option
  ufs: definitions for phy interface
  ufs: tune bkops while power managment events
  ufs: Add support for clock scaling using devfreq framework
  ufs: Add freq-table-hz property for UFS device
  ufs: Add support for clock gating
  ufs: refactor configuring power mode
  ufs: add UFS power management support
  ufs: introduce well known logical unit in ufs
  ufs: manually add well known logical units
  ufs: Active Power Mode - configuring bActiveICCLevel
  ufs: improve init sequence
  ufs: refactor query descriptor API support
  ufs: add voting support for host controller power
  ufs: Add clock initialization support
  ufs: Add regulator enable support
  ufs: Allow vendor specific initialization
  scsi: don't add scsi_device if its already visible
  scsi: fix the type for well known LUs
  scsi: fix comment in struct Scsi_Host definition
  ...

Pull SCSI fixes from James Bottomley:
 "This is a set of two small fixes, both to code which went in during
  the merge window: cxgb4i has a scheduling in atomic bug in its new
  ipv6 code and uas fails to work properly with the new scsi-mq code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] uas: disable use of blk-mq I/O path
  [SCSI] cxgb4i: avoid holding mutex in interrupt context