linux-toradex.git/drivers/usb, branch v2.6.12-rc4

[PATCH] USB cypress_m8: update kernel driver with current source

2005-05-04T06:31:52+00:00

Fixed problem where setting or retreiving the serial config would fail
with EPIPE.  Removed CRTS toggling so the driver behaves more like other
usbserial adapters.  Issued new interval of 1ms instead of the default
bInterval.  As a result, transfer speed has been substantially
increased.  From avg. 850bps to avg. 3300bps.  Also added new module
parameter 'interval' to tweak the interval in case this change causes
problems for someone.  Cleaned up code and formatting issues so source
is more readable.  Replaced the C++ style comments.  Various other code
cleanups.

Signed-off-by: Lonnie Mendez 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: Spelling fixes for drivers/usb.

2005-05-04T06:31:52+00:00

Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual

Signed-off-by: Steven Cole 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: unusual_devs entry for Minolta Dimage Z10

2005-05-04T06:31:51+00:00

This patch adds an unusual_devs entry for the Minolta Dimage Z10.
Originally reported by Vilisas 

Signed-off-by: Phil Dibowitz 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: unusual_devs.h: atmel snd1 storage

2005-05-04T06:31:51+00:00

Signed-off-by: Phil Dibowitz 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: ftdi_sio redundant macro removal

2005-05-04T06:31:50+00:00

[ftdi_sio] Replaced redundant INTERFACE_A and INTERFACE_B macros with
the equivalent PIT_SIOA and PIT_SIOB macros.

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: VID/PID updates for ftdi_sio driver

2005-05-04T06:31:50+00:00

Some VID/PID updates for the ftdi_sio driver:

* The "Gude Analog- und Digitalsysteme GmbH" entries were missing from
  the "combined" table.
* Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from
  4n-galaxy.de.
* Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to
  FTDI_RM_CANVIEW_PID.
* Added VID/PID for serial converter in Mobility Electronics EasiDock
  USB 200 (mentioned by Gregory Schmitt).
* Added PID for Active Robots USB comms board (mentioned by John Koch).

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman 

diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c

[PATCH] USB: new usbnet device id

2005-05-04T06:31:50+00:00

On Thu, Apr 14, 2005 at 11:06:21PM +0400, Sergey Vlasov wrote:
> http://thread.gmane.org/gmane.linux.usb.devel/32977
>
> (see "[PATCH] N/3 cdc acm errors").
>
> You also need this driver core fix:
>
> http://thread.gmane.org/gmane.linux.usb.devel/33132

I reproduced the same oops while trying to execute at+mode=99, it would
be nice to get these fix merged since I believe it's still needed to
connect the laptop over gprs (something I didn't test yet).

This further patch will allow you to connect via usbnet, Greg could you
apply? Thanks!

Signed-off-by: Andrea Arcangeli 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: add a driver for the AirPrime CDMA Wireless PC card.

2005-05-04T06:31:49+00:00

Easier than trying to use the generic usb-serial driver.

Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: ehci power fixes

2005-05-04T06:31:49+00:00

Miscellaneous updates for EHCI.

 - Mostly updates the power switching on EHCI controllers.  One routine
   centralizes the "power on/off all ports" logic, and the capability to
   do that is reported more correctly.

 - Courtesy Colin Leroy, a patch to always power up ports after resumes
   which didn't keep a USB device suspended.  The reset-everything logic
   powers down those ports (on some hardware) so something needs to turn
   them back on.

 - Minor tweaks/bugfixes for the debug port support.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB Storage: fix compile error

2005-05-04T06:31:49+00:00

This patch fixes a compiler error caused by a missing prototype.  It should
apply directly to Greg KH's usb-2.6.git tree.

Signed-off-by: Matthew Dharm 
Signed-off-by: Greg Kroah-Hartman