linux-toradex.git/drivers/usb, branch v2.6.16.45

pwc-uncompress.c shouldn't #include

2007-03-14T21:25:08+00:00

Fix a compile error on powerpc.

Signed-off-by: Adrian Bunk

USB: rtl8150 new device id

2007-02-22T20:13:05+00:00

This one adds another vendor ID to rtl8150 driver.

Signed-off-by: Petko Manolov 
Signed-off-by: Adrian Bunk

USB: add ZyXEL vendor/product ID to rtl8150 driver

2007-02-22T20:11:26+00:00

I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150
adapter.  Here is the relevant /proc/bus/usb/devices output (after
adding the vendor/product IDs to the driver):

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0586 ProdID=401a Rev= 1.00
S:  Manufacturer=ZyXEL
S:  Product=Prestige USB Adapter
S:  SerialNumber=1027
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=1ms

This patch adds the ZyXEL vendor ID to the rtl8150.c driver.  The
device has absolutely no identifying marks on the outside for model
type, just a serial number, and I can't find anything on ZyXEL's
website, so I called the product ID PRODUCT_ID_PRESTIGE to match the
product string.

Signed-off-by: Dan Streetman 
Signed-off-by: Adrian Bunk

fix rtl8150

2007-02-21T11:48:22+00:00

That code doesn't do what its author apparently thought it would do...

Signed-off-by: Al Viro 
Signed-off-by: Adrian Bunk

USB_RTL8150 must select MII to avoid link errors.

2007-01-09T02:23:34+00:00

Stolen from a patch by Randy Dunlap.

Signed-off-by: Adrian Bunk

USB: Fix alignment of buffer passed down to ->hub_control()

2007-01-09T02:23:30+00:00

Implementations assume the buffer is at least 4 byte aligned.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Adrian Bunk

drivers/usb/input/ati_remote.c: fix cut'n'paste error

2006-11-29T13:15:25+00:00

Backported from a patch by Mariusz Kozlowski 
in 2.6.19.

Signed-off-by: Adrian Bunk

USB: failure in usblp's error path

2006-11-29T11:45:29+00:00

if urb submission fails due to a transient error here eg. ENOMEM,
the driver is dead. This fixes it.

Signed-off-by: Oliver Neukum 
Signed-off-by: Adrian Bunk

USB: UHCI: Increase port-reset completion delay for HP controllers

2006-11-25T01:47:52+00:00

This patch (as657) increases the port-reset completion delay in uhci-hcd
for HP's embedded controllers.  Unlike other UHCI controllers, the HP
chips can take as long as 250 us to carry out the processing associated
with finishing a port reset.

This fixes Novell bug #148761.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Adrian Bunk

USB: add YEALINK phones to the HID_QUIRK_IGNORE blacklist

2006-09-22T18:28:19+00:00

Keys on Yealink based phones will not function properly when using the
generic HID driver. This patch prevents the generic HID code from
grabbing the device before the regular yealink driver can get a grip on
it.

Signed-off-by: Henk Vergonet 
Signed-off-by: Vojtech Pavlik 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Adrian Bunk