linux-toradex.git/drivers/usb, branch v2.6.36.4 Linux kernel for Apalis and Colibri modules xhci: Use GFP_NOIO during device reset. 2011-02-17T22:47:32+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2010-12-28T21:08:42+00:00 062d29c90bda892a67eecb5e972715e1bd5df9cd commit a6d940dd759bf240d28624198660ed34582a327b upstream. When xhci_discover_or_reset_device() is called after a host controller power loss, the virtual device may need to be reallocated. Make sure xhci_alloc_dev() uses GFP_NOIO. This avoid causing a deadlock by allowing the kernel to flush pending I/O while reallocating memory for a virtual device for a USB mass storage device that's holding the backing store for dirty memory buffers. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit a6d940dd759bf240d28624198660ed34582a327b upstream.

When xhci_discover_or_reset_device() is called after a host controller
power loss, the virtual device may need to be reallocated.  Make sure
xhci_alloc_dev() uses GFP_NOIO.  This avoid causing a deadlock by allowing
the kernel to flush pending I/O while reallocating memory for a virtual
device for a USB mass storage device that's holding the backing store for
dirty memory buffers.

This patch should be queued for the 2.6.37 stable tree.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb: Realloc xHCI structures after a hub is verified. 2011-02-17T22:47:32+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2010-12-23T19:12:42+00:00 cc402387cc7fdb826b193994051dad64cdf6377b commit 653a39d1f61bdc9f277766736d21d2e9be0391cb upstream. When there's an xHCI host power loss after a suspend from memory, the USB core attempts to reset and verify the USB devices that are attached to the system. The xHCI driver has to reallocate those devices, since the hardware lost all knowledge of them during the power loss. When a hub is plugged in, and the host loses power, the xHCI hardware structures are not updated to say the device is a hub. This is usually done in hub_configure() when the USB hub is detected. That function is skipped during a reset and verify by the USB core, since the core restores the old configuration and alternate settings, and the hub driver has no idea this happened. This bug makes the xHCI host controller reject the enumeration of low speed devices under the resumed hub. Therefore, make the USB core re-setup the internal xHCI hub device information by calling update_hub_device() when hub_activate() is called for a hub reset resume. After a host power loss, all devices under the roothub get a reset-resume or a disconnect. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 653a39d1f61bdc9f277766736d21d2e9be0391cb upstream.

When there's an xHCI host power loss after a suspend from memory, the USB
core attempts to reset and verify the USB devices that are attached to the
system.  The xHCI driver has to reallocate those devices, since the
hardware lost all knowledge of them during the power loss.

When a hub is plugged in, and the host loses power, the xHCI hardware
structures are not updated to say the device is a hub.  This is usually
done in hub_configure() when the USB hub is detected.  That function is
skipped during a reset and verify by the USB core, since the core restores
the old configuration and alternate settings, and the hub driver has no
idea this happened.  This bug makes the xHCI host controller reject the
enumeration of low speed devices under the resumed hub.

Therefore, make the USB core re-setup the internal xHCI hub device
information by calling update_hub_device() when hub_activate() is called
for a hub reset resume.  After a host power loss, all devices under the
roothub get a reset-resume or a disconnect.

This patch should be queued for the 2.6.37 stable tree.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xhci: Do not run xhci_cleanup_msix with irq disabled 2011-02-17T22:47:32+00:00 Zhang Rui rui.zhang@intel.com 2010-12-17T21:17:04+00:00 91e0d66a31148ff5108a1d877ddf54319903148b commit 40a9fb17f32dbe54de3d636142a59288544deed7 upstream. when unloading xhci_hcd, I got: [ 134.856813] xhci_hcd 0000:02:00.0: remove, state 4 [ 134.858140] usb usb3: USB disconnect, address 1 [ 134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [ 134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe [ 134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162 [ 134.880298] Call Trace: [ 134.881602] [<ffffffff8104156a>] __might_sleep+0xeb/0xf0 [ 134.882921] [<ffffffff814763dc>] mutex_lock+0x24/0x50 [ 134.884229] [<ffffffff810a745c>] free_desc+0x2e/0x5f [ 134.885538] [<ffffffff810a74c8>] irq_free_descs+0x3b/0x71 [ 134.886853] [<ffffffff8102584d>] free_irq_at+0x31/0x36 [ 134.888167] [<ffffffff8102723f>] destroy_irq+0x69/0x71 [ 134.889486] [<ffffffff8102747a>] native_teardown_msi_irq+0xe/0x10 [ 134.890820] [<ffffffff8124c382>] default_teardown_msi_irqs+0x57/0x80 [ 134.892158] [<ffffffff8124be46>] free_msi_irqs+0x8b/0xe9 [ 134.893504] [<ffffffff8124cd46>] pci_disable_msix+0x35/0x39 [ 134.894844] [<ffffffffa01b444a>] xhci_cleanup_msix+0x31/0x51 [xhci_hcd] [ 134.896186] [<ffffffffa01b4b3a>] xhci_stop+0x3a/0x80 [xhci_hcd] [ 134.897521] [<ffffffff81341dd4>] usb_remove_hcd+0xfd/0x14a [ 134.898859] [<ffffffff813500ae>] usb_hcd_pci_remove+0x5c/0xc6 [ 134.900193] [<ffffffff8123c606>] pci_device_remove+0x3f/0x91 [ 134.901535] [<ffffffff812e7ea4>] __device_release_driver+0x83/0xd9 [ 134.902899] [<ffffffff812e8571>] driver_detach+0x86/0xad [ 134.904222] [<ffffffff812e7d56>] bus_remove_driver+0xb2/0xd8 [ 134.905540] [<ffffffff812e8633>] driver_unregister+0x6c/0x74 [ 134.906839] [<ffffffff8123c8e4>] pci_unregister_driver+0x44/0x89 [ 134.908121] [<ffffffffa01b940e>] xhci_unregister_pci+0x15/0x17 [xhci_hcd] [ 134.909396] [<ffffffffa01bd7d2>] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd] [ 134.910652] [<ffffffff8107fcd1>] sys_delete_module+0x1ca/0x23b [ 134.911882] [<ffffffff81123932>] ? path_put+0x22/0x26 [ 134.913104] [<ffffffff8109a800>] ? audit_syscall_entry+0x2c/0x148 [ 134.914333] [<ffffffff8100ac82>] system_call_fastpath+0x16/0x1b [ 134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered [ 134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled and the same issue when xhci_suspend is invoked. (Note from Sarah: That's fixed by Andiry's patch before this, by synchronizing the irqs rather than freeing them on suspend.) Do not run xhci_cleanup_msix with irq disabled. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 40a9fb17f32dbe54de3d636142a59288544deed7 upstream.

when unloading xhci_hcd, I got:
[  134.856813] xhci_hcd 0000:02:00.0: remove, state 4
[  134.858140] usb usb3: USB disconnect, address 1
[  134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset.
[  134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85
[  134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe
[  134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162
[  134.880298] Call Trace:
[  134.881602]  [<ffffffff8104156a>] __might_sleep+0xeb/0xf0
[  134.882921]  [<ffffffff814763dc>] mutex_lock+0x24/0x50
[  134.884229]  [<ffffffff810a745c>] free_desc+0x2e/0x5f
[  134.885538]  [<ffffffff810a74c8>] irq_free_descs+0x3b/0x71
[  134.886853]  [<ffffffff8102584d>] free_irq_at+0x31/0x36
[  134.888167]  [<ffffffff8102723f>] destroy_irq+0x69/0x71
[  134.889486]  [<ffffffff8102747a>] native_teardown_msi_irq+0xe/0x10
[  134.890820]  [<ffffffff8124c382>] default_teardown_msi_irqs+0x57/0x80
[  134.892158]  [<ffffffff8124be46>] free_msi_irqs+0x8b/0xe9
[  134.893504]  [<ffffffff8124cd46>] pci_disable_msix+0x35/0x39
[  134.894844]  [<ffffffffa01b444a>] xhci_cleanup_msix+0x31/0x51 [xhci_hcd]
[  134.896186]  [<ffffffffa01b4b3a>] xhci_stop+0x3a/0x80 [xhci_hcd]
[  134.897521]  [<ffffffff81341dd4>] usb_remove_hcd+0xfd/0x14a
[  134.898859]  [<ffffffff813500ae>] usb_hcd_pci_remove+0x5c/0xc6
[  134.900193]  [<ffffffff8123c606>] pci_device_remove+0x3f/0x91
[  134.901535]  [<ffffffff812e7ea4>] __device_release_driver+0x83/0xd9
[  134.902899]  [<ffffffff812e8571>] driver_detach+0x86/0xad
[  134.904222]  [<ffffffff812e7d56>] bus_remove_driver+0xb2/0xd8
[  134.905540]  [<ffffffff812e8633>] driver_unregister+0x6c/0x74
[  134.906839]  [<ffffffff8123c8e4>] pci_unregister_driver+0x44/0x89
[  134.908121]  [<ffffffffa01b940e>] xhci_unregister_pci+0x15/0x17 [xhci_hcd]
[  134.909396]  [<ffffffffa01bd7d2>] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd]
[  134.910652]  [<ffffffff8107fcd1>] sys_delete_module+0x1ca/0x23b
[  134.911882]  [<ffffffff81123932>] ? path_put+0x22/0x26
[  134.913104]  [<ffffffff8109a800>] ? audit_syscall_entry+0x2c/0x148
[  134.914333]  [<ffffffff8100ac82>] system_call_fastpath+0x16/0x1b
[  134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered
[  134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled

and the same issue when xhci_suspend is invoked.  (Note from Sarah: That's
fixed by Andiry's patch before this, by synchronizing the irqs rather than
freeing them on suspend.)

Do not run xhci_cleanup_msix with irq disabled.

This patch should be queued for the 2.6.37 stable tree.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers: update to pl2303 usb-serial to support Motorola cables 2011-02-17T22:47:14+00:00 Dario Lombardo dario.lombardo@libero.it 2011-01-21T14:35:19+00:00 12bc54289e180df608f81e498d5baf4f26d88d9d commit 96a3e79edff6f41b0f115a82f1a39d66218077a7 upstream. Added 0x0307 device id to support Motorola cables to the pl2303 usb serial driver. This cable has a modified chip that is a pl2303, but declares itself as 0307. Fixed by adding the right device id to the supported devices list, assigning it the code labeled PL2303_PRODUCT_ID_MOTOROLA. Signed-off-by: Dario Lombardo <dario.lombardo@libero.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 96a3e79edff6f41b0f115a82f1a39d66218077a7 upstream.

Added 0x0307 device id to support Motorola cables to the pl2303 usb
serial driver. This cable has a modified chip that is a pl2303, but
declares itself as 0307. Fixed by adding the right device id to the
supported devices list, assigning it the code labeled
PL2303_PRODUCT_ID_MOTOROLA.

Signed-off-by: Dario Lombardo <dario.lombardo@libero.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: fix race between root-hub resume and wakeup requests 2011-02-17T22:46:44+00:00 Alan Stern stern@rowland.harvard.edu 2011-02-02T18:59:33+00:00 c2bbe01f172bf66bb2985d361d2a6e2414e4e24b commit bf3d7d40e42a85ca73a34e1385ff34f092a384eb upstream. The USB core keeps track of pending resume requests for root hubs, in order to resolve races between wakeup requests and suspends. However the code that does this is subject to another race (between wakeup requests and resumes) because the WAKEUP_PENDING flag is cleared before the resume occurs, leaving a window in which another wakeup request might arrive. This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING flag after the resume instead of before it. This fixes Bugzilla #24952. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Paul Bender <pebender@san.rr.com> Tested-by: warpme <warpme@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit bf3d7d40e42a85ca73a34e1385ff34f092a384eb upstream.

The USB core keeps track of pending resume requests for root hubs, in
order to resolve races between wakeup requests and suspends.  However
the code that does this is subject to another race (between wakeup
requests and resumes) because the WAKEUP_PENDING flag is cleared
before the resume occurs, leaving a window in which another wakeup
request might arrive.

This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING
flag after the resume instead of before it.

This fixes Bugzilla #24952.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Paul Bender <pebender@san.rr.com>
Tested-by: warpme <warpme@o2.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: prevent buggy hubs from crashing the USB stack 2011-02-17T22:46:44+00:00 Alan Stern stern@rowland.harvard.edu 2011-01-31T15:56:37+00:00 c2f38a34645bef1c6475dcacbc51c038fd081cfc commit d199c96d41d80a567493e12b8e96ea056a1350c1 upstream. If anyone comes across a high-speed hub that (by mistake or by design) claims to have no Transaction Translators, plugging a full- or low-speed device into it will cause the USB stack to crash. This patch (as1446) prevents the problem by ignoring such devices, since the kernel has no way to communicate with them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Perry Neben <neben@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit d199c96d41d80a567493e12b8e96ea056a1350c1 upstream.

If anyone comes across a high-speed hub that (by mistake or by design)
claims to have no Transaction Translators, plugging a full- or
low-speed device into it will cause the USB stack to crash.  This
patch (as1446) prevents the problem by ignoring such devices, since
the kernel has no way to communicate with them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Perry Neben <neben@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: EHCI: fix scheduling while atomic during suspend 2011-02-17T22:46:43+00:00 Yin Kangkai kangkai.yin@intel.com 2011-01-28T04:04:35+00:00 8a7dfbe3f7930c25c16f54b5d638350d03594f2f commit 148fc55fd0449683a1d15bf219ad8d8b6fa17545 upstream. There is a msleep with spin lock held during ehci pci suspend, which will cause kernel BUG: scheduling while atomic. Fix that. [ 184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002 [ 184.139632] 4 locks held by kworker/u:11/416: [ 184.139640] #0: (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb [ 184.139669] #1: ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb [ 184.139686] #2: (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154 [ 184.139706] #3: (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b [ 184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery [ 184.139748] irq event stamp: 52 [ 184.139753] hardirqs last enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293 [ 184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e [ 184.139777] softirqs last enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d [ 184.139789] softirqs last disabled at (0): [< (null)>] (null) [ 184.139802] Pid: 416, comm: kworker/u:11 Tainted: G C 2.6.37-6.3-adaptation-oaktrail #37 [ 184.139809] Call Trace: [ 184.139820] [<c102eeff>] __schedule_bug+0x5e/0x65 [ 184.139829] [<c14fbca5>] schedule+0xac/0xc4c [ 184.139840] [<c11d4845>] ? string+0x37/0x8b [ 184.139853] [<c1044f21>] ? lock_timer_base+0x1f/0x3e [ 184.139863] [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e [ 184.139876] [<c1061590>] ? trace_hardirqs_off+0xb/0xd [ 184.139885] [<c14fccdc>] schedule_timeout+0x283/0x2d9 [ 184.139896] [<c104516f>] ? process_timeout+0x0/0xa [ 184.139906] [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17 [ 184.139916] [<c104566a>] msleep+0x10/0x16 [ 184.139926] [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6 [ 184.139937] [<c132f3eb>] ehci_pci_suspend+0x48/0x7b [ 184.139946] [<c1326587>] suspend_common+0x52/0xbb [ 184.139956] [<c1326625>] hcd_pci_suspend+0x26/0x28 [ 184.139967] [<c11e7182>] pci_pm_suspend+0x5f/0xd0 [ 184.139976] [<c127ca3a>] pm_op+0x5d/0xf0 [ 184.139986] [<c127ceac>] __device_suspend+0xf5/0x154 [ 184.139996] [<c127d2c8>] async_suspend+0x16/0x3a [ 184.140006] [<c1058f54>] async_run_entry_fn+0x89/0x111 [ 184.140016] [<c104deb6>] process_one_work+0x295/0x4cb [ 184.140026] [<c1058ecb>] ? async_run_entry_fn+0x0/0x111 [ 184.140036] [<c104e3d0>] worker_thread+0x17f/0x298 [ 184.140045] [<c104e251>] ? worker_thread+0x0/0x298 [ 184.140055] [<c105277f>] kthread+0x64/0x69 [ 184.140064] [<c105271b>] ? kthread+0x0/0x69 [ 184.140075] [<c1002efa>] kernel_thread_helper+0x6/0x1a Signed-off-by: Yin Kangkai <kangkai.yin@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 148fc55fd0449683a1d15bf219ad8d8b6fa17545 upstream.

There is a msleep with spin lock held during ehci pci suspend, which will
cause kernel BUG: scheduling while atomic. Fix that.

[  184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002
[  184.139632] 4 locks held by kworker/u:11/416:
[  184.139640]  #0:  (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139669]  #1:  ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139686]  #2:  (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154
[  184.139706]  #3:  (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b
[  184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery
[  184.139748] irq event stamp: 52
[  184.139753] hardirqs last  enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293
[  184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e
[  184.139777] softirqs last  enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d
[  184.139789] softirqs last disabled at (0): [<  (null)>]   (null)
[  184.139802] Pid: 416, comm: kworker/u:11 Tainted: G         C  2.6.37-6.3-adaptation-oaktrail #37
[  184.139809] Call Trace:
[  184.139820]  [<c102eeff>] __schedule_bug+0x5e/0x65
[  184.139829]  [<c14fbca5>] schedule+0xac/0xc4c
[  184.139840]  [<c11d4845>] ? string+0x37/0x8b
[  184.139853]  [<c1044f21>] ? lock_timer_base+0x1f/0x3e
[  184.139863]  [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e
[  184.139876]  [<c1061590>] ? trace_hardirqs_off+0xb/0xd
[  184.139885]  [<c14fccdc>] schedule_timeout+0x283/0x2d9
[  184.139896]  [<c104516f>] ? process_timeout+0x0/0xa
[  184.139906]  [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17
[  184.139916]  [<c104566a>] msleep+0x10/0x16
[  184.139926]  [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6
[  184.139937]  [<c132f3eb>] ehci_pci_suspend+0x48/0x7b
[  184.139946]  [<c1326587>] suspend_common+0x52/0xbb
[  184.139956]  [<c1326625>] hcd_pci_suspend+0x26/0x28
[  184.139967]  [<c11e7182>] pci_pm_suspend+0x5f/0xd0
[  184.139976]  [<c127ca3a>] pm_op+0x5d/0xf0
[  184.139986]  [<c127ceac>] __device_suspend+0xf5/0x154
[  184.139996]  [<c127d2c8>] async_suspend+0x16/0x3a
[  184.140006]  [<c1058f54>] async_run_entry_fn+0x89/0x111
[  184.140016]  [<c104deb6>] process_one_work+0x295/0x4cb
[  184.140026]  [<c1058ecb>] ? async_run_entry_fn+0x0/0x111
[  184.140036]  [<c104e3d0>] worker_thread+0x17f/0x298
[  184.140045]  [<c104e251>] ? worker_thread+0x0/0x298
[  184.140055]  [<c105277f>] kthread+0x64/0x69
[  184.140064]  [<c105271b>] ? kthread+0x0/0x69
[  184.140075]  [<c1002efa>] kernel_thread_helper+0x6/0x1a

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph 2011-02-17T22:46:43+00:00 Michael Williamson michael.h.williamson@gmail.com 2011-01-28T00:36:19+00:00 018c993641ca462cbcab8377901f35e80aa24504 commit 28fe2eb0162a1d23370dd99ff7d0e35632b1ee91 upstream. Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 28fe2eb0162a1d23370dd99ff7d0e35632b1ee91 upstream.

Add the USB Vendor ID and Product ID for a Acton Research Corp.
spectrograph device with a FTDI chip for serial I/O.

Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: cdc-acm: Adding second ACM channel support for Nokia N8 2011-02-17T22:46:43+00:00 Arvid Ephraim Picciani arvid.picciani@nokia.com 2011-01-25T14:58:40+00:00 f6878bd76da266c3cc70ab7f2653aca755c967eb commit 721d92fc6373dee15846216f9d178ec240ec0fd7 upstream. This adds the N8 to the list of devices in cdc-acm, in order to get the secondary ACM device exposed. In the spirit of: http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554 Signed-off-by: Arvid Ephraim Picciani <arvid.picciani@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 721d92fc6373dee15846216f9d178ec240ec0fd7 upstream.

This adds the N8 to the list of devices in cdc-acm, in order to get the
secondary ACM device exposed.

In the spirit of:
http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554

Signed-off-by: Arvid Ephraim Picciani <arvid.picciani@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: ftdi_sio: add ST Micro Connect Lite uart support 2011-02-17T22:46:43+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2011-01-29T14:32:52+00:00 0f5b36a3a73328907b91b3a5c5ac958040814010 commit 6ec2f46c4b4abf48c88c0ae7c476f347b97e1105 upstream. on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 6ec2f46c4b4abf48c88c0ae7c476f347b97e1105 upstream.

on ST Micro Connect Lite we have 4 port
Part A and B for the JTAG
Port C Uart
Port D for PIO

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>