linux-toradex.git/drivers/usb, branch v3.10.73

USB: serial: fix potential use-after-free after failed probe

2015-03-18T12:22:31+00:00

commit 07fdfc5e9f1c966be8722e8fa927e5ea140df5ce upstream.

Fix return value in probe error path, which could end up returning
success (0) on errors. This could in turn lead to use-after-free or
double free (e.g. in port_remove) when the port device is removed.

Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove
at the right times")
Signed-off-by: Johan Hovold 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

USB: serial: fix infinite wait_until_sent timeout

2015-03-18T12:22:31+00:00

commit f528bf4f57e43d1af4b2a5c97f09e43e0338c105 upstream.

Make sure to handle an infinite timeout (0).

Note that wait_until_sent is currently never called with a 0-timeout
argument due to a bug in tty_wait_until_sent.

Fixes: dcf010503966 ("USB: serial: add generic wait_until_sent
implementation")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

xhci: fix reporting of 0-sized URBs in control endpoint

2015-03-18T12:22:30+00:00

commit 45ba2154d12fc43b70312198ec47085f10be801a upstream.

When a control transfer has a short data stage, the xHCI controller generates
two transfer events: a COMP_SHORT_TX event that specifies the untransferred
amount, and a COMP_SUCCESS event. But when the data stage is not short, only the
COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to
urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless
urb->actual_length was set already by a previous COMP_SHORT_TX event.

The driver checks this by seeing whether urb->actual_length == 0, but this alone
is the wrong test, as it is entirely possible for a short transfer to have an
urb->actual_length = 0.

This patch changes the xhci driver to rely on a new td->urb_length_set flag,
which is set to true when a COMP_SHORT_TX event is received and the URB length
updated at that stage.

This fixes a bug which affected the HSO plugin, which relies on URBs with
urb->actual_length == 0 to halt re-submitting the RX URB in the control
endpoint.

Signed-off-by: Aleksander Morgado 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: Allocate correct amount of scratchpad buffers

2015-03-18T12:22:30+00:00

commit 6596a926b0b6c80b730a1dd2fa91908e0a539c37 upstream.

Include the high order bit fields for Max scratchpad buffers when
calculating how many scratchpad buffers are needed.

I'm suprised this hasn't caused more issues, we never allocated more than
32 buffers even if xhci needed more. Either we got lucky and xhci never
really used past that area, or then we got enough zeroed dma memory anyway.

Should be backported as far back as possible

Reported-by: Tim Chen 
Tested-by: Tim Chen 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards

2015-03-18T12:22:30+00:00

commit c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c upstream.

This patch integrates Cyber Cortex AV boards with the existing
ftdi_jtag_quirk in order to use serial port 0 with JTAG which is
required by the manufacturers' software.

Steps: 2

[ftdi_sio_ids.h]
1. Defined the device PID

[ftdi_sio.c]
2. Added a macro declaration to the ids array, in order to enable the
jtag quirk for the device.

Signed-off-by: Max Mansfield 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: usbfs: don't leak kernel data in siginfo

2015-03-18T12:22:30+00:00

commit f0c2b68198589249afd2b1f2c4e8de8c03e19c16 upstream.

When a signal is delivered, the information in the siginfo structure
is copied to userspace.  Good security practice dicatates that the
unused fields in this structure should be initialized to 0 so that
random kernel stack data isn't exposed to the user.  This patch adds
such an initialization to the two places where usbfs raises signals.

Signed-off-by: Alan Stern 
Reported-by: Dave Mielke 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: Adding Seletek device id's

2015-03-18T12:22:30+00:00

commit 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 upstream.

These device ID's are not associated with the cp210x module currently,
but should be. This patch allows the devices to operate upon connecting
them to the usb bus as intended.

Signed-off-by: Michiel van de Garde 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

2015-03-06T22:40:51+00:00

commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.

Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: fix use-after-free bug in usb_hcd_unlink_urb()

2015-03-06T22:40:51+00:00

commit c99197902da284b4b723451c1471c45b18537cde upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.

Signed-off-by: Alan Stern 
Reported-by: Joe Lawrence 
Tested-by: Joe Lawrence 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

USB: cp210x: add ID for RUGGEDCOM USB Serial Console

2015-03-06T22:40:51+00:00

commit a6f0331236fa75afba14bbcf6668d42cebb55c43 upstream.

Added the USB serial console device ID for Siemens Ruggedcom devices
which have a USB port for their serial console.

Signed-off-by: Len Sorensen 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman