linux-toradex.git/drivers/usb, branch v3.15.5

usb: gadget: f_fs: fix NULL pointer dereference when there are no strings

2014-07-09T18:21:24+00:00

commit f0688c8b81d2ea239c3fb0b848f623b579238d99 upstream.

If the descriptors do not need any strings and user space sends empty
set of strings, the ffs->stringtabs field remains NULL.  Thus
*ffs->stringtabs in functionfs_bind leads to a NULL pointer
dereferenece.

The bug was introduced by commit [fd7c9a007f: “use usb_string_ids_n()”].

While at it, remove double initialisation of lang local variable in
that function.

ffs->strings_count does not need to be checked in any way since in
the above scenario it will remain zero and usb_string_ids_n() is
a no-operation when colled with 0 argument.

Signed-off-by: Michal Nazarewicz 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: fix null deref at port probe

2014-07-09T18:21:24+00:00

commit aea1ae8760314e072bf1b773521e9de5d5dda10d upstream.

Fix NULL-pointer dereference when probing an interface with no
endpoints.

These devices have two bulk endpoints per interface, but this avoids
crashing the kernel if a user forces a non-FTDI device to be probed.

Note that the iterator variable was made unsigned in order to avoid
a maybe-uninitialized compiler warning for ep_desc after the loop.

Fixes: 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size
calculation")

Reported-by: Mike Remski 
Tested-by: Mike Remski 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: delete td from req's td list at ep_dequeue

2014-07-09T18:21:24+00:00

commit e4adcff09ca39ecbcc4851d40d0f0a5458e7b77a upstream.

We need to delete un-finished td from current request's td list
at ep_dequeue API, otherwise, this non-user td will be remained
at td list before this request is freed. So if we do ep_queue->
ep_dequeue->ep_queue sequence, when the complete interrupt for
the second ep_queue comes, we search td list for this request,
the first td (added by the first ep_queue) will be handled, and
its status is still active, so we will consider the this transfer
still not be completed, but in fact, it has completed. It causes
the peripheral side considers it never receives current data for
this transfer.

We met this problem when do "Error Recovery Test - Device Configured"
test item for USBCV2 MSC test, the host has never received ACK for
the IN token for CSW due to peripheral considers it does not get this
CBW, the USBCV test log like belows:

--------------------------------------------------------------------------
INFO
Issuing BOT MSC Reset, reset should always succeed
INFO
Retrieving status on CBW endpoint
INFO
CBW endpoint status = 0x0
INFO
Retrieving status on CSW endpoint
INFO
CSW endpoint status = 0x0
INFO
Issuing required command (Test Unit Ready) to verify device has recovered
INFO
Issuing CBW (attempt #1):
INFO
|----- CBW LUN                  = 0x0
INFO
|----- CBW Flags                = 0x0
INFO
|----- CBW Data Transfer Length = 0x0
INFO
|----- CBW CDB Length           = 0x6
INFO
|----- CBW CDB-00 = 0x0
INFO
|----- CBW CDB-01 = 0x0
INFO
|----- CBW CDB-02 = 0x0
INFO
|----- CBW CDB-03 = 0x0
INFO
|----- CBW CDB-04 = 0x0
INFO
|----- CBW CDB-05 = 0x0
INFO
Issuing CSW : try 1
INFO
CSW Bulk Request timed out!
ERROR
Failed CSW phase : should have been success or stall
FAIL
(5.3.4) The CSW status value must be 0x00, 0x01, or 0x02.
ERROR
BOTCommonMSCRequest failed:  error=80004000

Cc: Andrzej Pietrasiewicz 
Signed-off-by: Peter Chen 
Signed-off-by: Greg Kroah-Hartman

usb: musb: Fix panic upon musb_am335x module removal

2014-07-09T18:21:24+00:00

commit 7adb5c876e9c0677078a1e1094c6eafd29c30b74 upstream.

At probe time, the musb_am335x driver register its childs by
calling of_platform_populate(), which registers all childs in
the devicetree hierarchy recursively.

On the other side, the driver's remove() function uses of_device_unregister()
to remove each child of musb_am335x's.

However, when musb_dsps is loaded, its devices are attached to the musb_am335x
device as musb_am335x childs. Hence, musb_am335x remove() will attempt to
unregister the devices registered by musb_dsps, which produces a kernel panic.

In other words, the childs in the "struct device" hierarchy are not the same
as the childs in the "devicetree" hierarchy.

Ideally, we should enforce the removal of the devices registered by
musb_am335x *only*, instead of all its child devices. However, because of the
recursive nature of of_platform_populate, this doesn't seem possible.

Therefore, as the only solution at hand, this commit disables musb_am335x
driver removal capability, preventing it from being ever removed. This was
originally suggested by Sebastian Siewior:

https://www.mail-archive.com/linux-omap@vger.kernel.org/msg104946.html

And for reference, here's the panic upon module removal:

musb-hdrc musb-hdrc.0.auto: remove, state 4
usb usb1: USB disconnect, device number 1
musb-hdrc musb-hdrc.0.auto: USB bus 1 deregistered
Unable to handle kernel NULL pointer dereference at virtual address 0000008c
pgd = de11c000
[0000008c] *pgd=9e174831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] ARM
Modules linked in: musb_am335x(-) musb_dsps musb_hdrc usbcore usb_common
CPU: 0 PID: 623 Comm: modprobe Not tainted 3.15.0-rc4-00001-g24efd13 #69
task: de1b7500 ti: de122000 task.ti: de122000
PC is at am335x_shutdown+0x10/0x28
LR is at am335x_shutdown+0xc/0x28
pc : []    lr : []    psr: a0000013
sp : de123df8  ip : 00000004  fp : 00028f00
r10: 00000000  r9 : de122000  r8 : c000e6c4
r7 : de0e3c10  r6 : de0e3800  r5 : de624010  r4 : de1ec750
r3 : de0e3810  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 9e11c019  DAC: 00000015
Process modprobe (pid: 623, stack limit = 0xde122240)
Stack: (0xde123df8 to 0xde124000)
3de0:                                                       de0e3810 bf054488
3e00: bf05444c de624010 60000013 bf043650 000012fc de624010 de0e3810 bf043a20
3e20: de0e3810 bf04b240 c0635b88 c02ca37c c02ca364 c02c8db0 de1b7500 de0e3844
3e40: de0e3810 c02c8e28 c0635b88 de02824c de0e3810 c02c884c de0e3800 de0e3810
3e60: de0e3818 c02c5b20 bf05417c de0e3800 de0e3800 c0635b88 de0f2410 c02ca838
3e80: bf05417c de0e3800 bf055438 c02ca8cc de0e3c10 bf054194 de0e3c10 c02ca37c
3ea0: c02ca364 c02c8db0 de1b7500 de0e3c44 de0e3c10 c02c8e28 c0635b88 de02824c
3ec0: de0e3c10 c02c884c de0e3c10 de0e3c10 de0e3c18 c02c5b20 de0e3c10 de0e3c10
3ee0: 00000000 bf059000 a0000013 c02c5bc0 00000000 bf05900c de0e3c10 c02c5c48
3f00: de0dd0c0 de1ec970 de0f2410 bf05929c de0f2444 bf05902c de0f2410 c02ca37c
3f20: c02ca364 c02c8db0 bf05929c de0f2410 bf05929c c02c94c8 bf05929c 00000000
3f40: 00000800 c02c8ab4 bf0592e0 c007fc40 c00dd820 6273756d 336d615f 00783533
3f60: c064a0ac de1b7500 de122000 de1b7500 c000e590 00000001 c000e6c4 c0060160
3f80: 00028e70 00028e70 00028ea4 00000081 60000010 00028e70 00028e70 00028ea4
3fa0: 00000081 c000e500 00028e70 00028e70 00028ea4 00000800 becb59f8 00027608
3fc0: 00028e70 00028e70 00028ea4 00000081 00000001 00000001 00000000 00028f00
3fe0: b6e6b6f0 becb59d4 000160e8 b6e6b6fc 60000010 00028ea4 00000000 00000000
[] (am335x_shutdown) from [] (dsps_musb_exit+0x3c/0x4c [musb_dsps])
[] (dsps_musb_exit [musb_dsps]) from [] (musb_shutdown+0x80/0x90 [musb_hdrc])
[] (musb_shutdown [musb_hdrc]) from [] (musb_remove+0x24/0x68 [musb_hdrc])
[] (musb_remove [musb_hdrc]) from [] (platform_drv_remove+0x18/0x1c)
[] (platform_drv_remove) from [] (__device_release_driver+0x70/0xc8)
[] (__device_release_driver) from [] (device_release_driver+0x20/0x2c)
[] (device_release_driver) from [] (bus_remove_device+0xdc/0x10c)
[] (bus_remove_device) from [] (device_del+0x104/0x198)
[] (device_del) from [] (platform_device_del+0x14/0x9c)
[] (platform_device_del) from [] (platform_device_unregister+0xc/0x20)
[] (platform_device_unregister) from [] (dsps_remove+0x18/0x38 [musb_dsps])
[] (dsps_remove [musb_dsps]) from [] (platform_drv_remove+0x18/0x1c)
[] (platform_drv_remove) from [] (__device_release_driver+0x70/0xc8)
[] (__device_release_driver) from [] (device_release_driver+0x20/0x2c)
[] (device_release_driver) from [] (bus_remove_device+0xdc/0x10c)
[] (bus_remove_device) from [] (device_del+0x104/0x198)
[] (device_del) from [] (device_unregister+0xc/0x20)
[] (device_unregister) from [] (of_remove_populated_child+0xc/0x14 [musb_am335x])
[] (of_remove_populated_child [musb_am335x]) from [] (device_for_each_child+0x44/0x70)
[] (device_for_each_child) from [] (am335x_child_remove+0x18/0x30 [musb_am335x])
[] (am335x_child_remove [musb_am335x]) from [] (platform_drv_remove+0x18/0x1c)
[] (platform_drv_remove) from [] (__device_release_driver+0x70/0xc8)
[] (__device_release_driver) from [] (driver_detach+0xb4/0xb8)
[] (driver_detach) from [] (bus_remove_driver+0x4c/0xa0)
[] (bus_remove_driver) from [] (SyS_delete_module+0x128/0x1cc)
[] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x48)

Fixes: 97238b35d5bb ("usb: musb: dsps: use proper child nodes")
Acked-by: George Cherian 
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq

2014-07-09T18:21:24+00:00

commit c58d80f523ffc15ef4d062fc7aeb03793fe39701 upstream.

Some TI chips raise the DMA complete interrupt before the actual
transfer has been completed. The code tries to busy wait for a few
microseconds and if that fails it arms an hrtimer to recheck. So far
so good, but that has the following issue:

CPU 0					CPU1

start_next_transfer(RQ1);

DMA interrupt
  if (premature_irq(RQ1))
    if (!hrtimer_active(timer))
       hrtimer_start(timer);

hrtimer expires
  timer->state = CALLBACK_RUNNING;
  timer->fn()
    cppi41_recheck_tx_req()
      complete_request(RQ1);
      if (requests_pending())
        start_next_transfer(RQ2);

					DMA interrupt
					  if (premature_irq(RQ2))
					    if (!hrtimer_active(timer))
					       hrtimer_start(timer);
  timer->state = INACTIVE;

The premature interrupt of request2 on CPU1 does not arm the timer and
therefor the request completion never happens because it checks for
!hrtimer_active(). hrtimer_active() evaluates:

  timer->state != HRTIMER_STATE_INACTIVE

which of course evaluates to true in the above case as timer->state is
CALLBACK_RUNNING.

That's clearly documented:

 * A timer is active, when it is enqueued into the rbtree or the
 * callback function is running or it's in the state of being migrated
 * to another cpu.

But that's not what the code wants to check. The code wants to check
whether the timer is queued, i.e. whether its armed and waiting for
expiry.

We have a helper function for this: hrtimer_is_queued(). This
evaluates:

  timer->state & HRTIMER_STATE_QUEUED

So in the above case this evaluates to false and therefor forces the
DMA interrupt on CPU1 to call hrtimer_start().

Use hrtimer_is_queued() instead of hrtimer_active() and evrything is
good.

Reported-by: Torben Hohn 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: musb: ux500: don't propagate the OF node

2014-07-09T18:21:24+00:00

commit 82363cf2eeafeea6ba88849f5e2febdc8a05943f upstream.

There is a regression in the upcoming v3.16-rc1, that is caused
by a problem that has been around for a while but now finally
hangs the system. The bootcrawl looks like this:

pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already
requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto
pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) status -22
pinctrl-nomadik soc:pinctrl: could not request pin 256
(GPIO256_AF28) from group usb_a_1  on device pinctrl-nomadik
musb-hdrc musb-hdrc.0.auto: Error applying setting, reverse
things back
HS USB OTG: no transceiver configured
musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
platform musb-hdrc.0.auto: Driver musb-hdrc requests
probe deferral
(...)

The ux500 MUSB driver propagates the OF node to the dynamically
created musb-hdrc device, which is incorrect as it makes the OF
core believe there are two devices spun from the very same
DT node, which confuses other parts of the device core, notably
the pin control subsystem, which will try to apply all the pin
control settings also to the HDRC device as it gets
instantiated. (The OMAP2430 for example, does not set the
of_node member.)

Cc: Arnd Bergmann 
Acked-by: Lee Jones 
Signed-off-by: Linus Walleij 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: option: add/modify Olivetti Olicard modems

2014-07-09T18:21:24+00:00

commit b0ebef36e93703e59003ad6a1a20227e47714417 upstream.

Adding a couple of Olivetti modems and blacklisting the net
function on a couple which are already supported.

Reported-by: Lars Melin 
Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: option: add device ID for SpeedUp SU9800 usb 3g modem

2014-07-09T18:21:24+00:00

commit 1cab4c68e339086cdaff7535848e878e8f261fca upstream.

Reported by Alif Mubarak Ahmad:

This device vendor and product id is 1c9e:9800
It is working as serial interface with generic usbserial driver.
I thought it is more suitable to use usbserial option driver, which has
better capability distinguishing between modem serial interface and
micro sd storage interface.

[ johan: style changes ]

Signed-off-by: Oliver Neukum 
Tested-by: Alif Mubarak Ahmad 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

xhci: Fix runtime suspended xhci from blocking system suspend.

2014-07-09T18:21:23+00:00

commit d6236f6d1d885aa19d1cd7317346fe795227a3cc upstream.

The system suspend flow as following:
1, Freeze all user processes and kenrel threads.

2, Try to suspend all devices.

2.1, If pci device is in RPM suspended state, then pci driver will try
to resume it to RPM active state in the prepare stage.

2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two
workqueue items to resume usb2&usb3 roothub devices.

2.3, Call suspend callbacks of devices.

2.3.1, All suspend callbacks of all hcd's children, including
roothub devices are called.

2.3.2, Finally, hcd_pci_suspend callback is called.

Due to workqueue threads were already frozen in step 1, the workqueue
items can't be scheduled, and the roothub devices can't be resumed in
this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in
usb_hcd_resume_root_hub won't be cleared. Finally,
hcd_pci_suspend will return -EBUSY, and system suspend fails.

The reason why this issue doesn't show up very often is due to that
choose_wakeup will be called in step 2.3.1. In step 2.3.1, if
udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then
udev will resume to RPM active for changing the wakeup settings. This
has been a lucky hit which hides this issue.

For some special xHCI controllers which have no USB2 port, then roothub
will not match hub driver due to probe failed. Then its
do_remote_wakeup will be set to zero, and we won't be as lucky.

xhci driver doesn't need to resume roothub devices everytime like in
the above case. It's only needed when there are pending event TRBs.

This patch should be back-ported to kernels as old as 3.2, that
contains the commit f69e3120df82391a0ee8118e0a156239a06b2afb
"USB: XHCI: resume root hubs when the controller resumes"

Signed-off-by: Wang, Yu 
Acked-by: Alan Stern 
[use readl() instead of removed xhci_readl(), reword commit message -Mathias]
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: correct burst count field for isoc transfers on 1.0 xhci hosts

2014-07-09T18:21:23+00:00

commit 3213b151387df0b95f4eada104f68eb1c1409cb3 upstream.

The transfer burst count (TBC) field in xhci 1.0 hosts should be set
to the number of bursts needed to transfer all packets in a isoc TD.
Supported values are 0-2 (1 to 3 bursts per service interval).

Formula for TBC calculation is given in xhci spec section 4.11.2.3:
TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1

This patch should be applied to stable kernels since 3.0 that contain
the commit 5cd43e33b9519143f06f507dd7cbee6b7a621885
"xhci 1.0: Set transfer burst count field."

Suggested-by: ShiChun Ma 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman