linux-toradex.git/drivers/usb, branch v3.4.62 Linux kernel for Apalis and Colibri modules USB: mos7720: fix broken control requests 2013-08-20T15:26:28+00:00 Johan Hovold jhovold@gmail.com 2013-08-13T11:27:34+00:00 d36f8a9594acdd87233b2a7e91328b7d56fa3828 commit ef6c8c1d733e244f0499035be0dabe1f4ed98c6f upstream. The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ef6c8c1d733e244f0499035be0dabe1f4ed98c6f upstream.

The parallel-port code of the drivers used a stack allocated
control-request buffer for asynchronous (and possibly deferred) control
requests. This not only violates the no-DMA-from-stack requirement but
could also lead to corrupt control requests being submitted.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: add two quirky touchscreen 2013-08-20T15:26:28+00:00 Oliver Neukum oneukum@suse.de 2013-08-14T09:01:46+00:00 40d0288f1975286f4a249b76f3b489bde5bc0be5 commit 304ab4ab079a8ed03ce39f1d274964a532db036b upstream. These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 304ab4ab079a8ed03ce39f1d274964a532db036b upstream.

These devices tend to become unresponsive after S3

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: don't try to reset_device() a port that got just disconnected 2013-08-15T05:57:07+00:00 Julius Werner jwerner@chromium.org 2013-07-31T02:51:20+00:00 8b45ff80d9d6e641e2518eddad76aafdadc8dc92 commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream. The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream.

The USB hub driver's event handler contains a check to catch SuperSpeed
devices that transitioned into the SS.Inactive state and tries to fix
them with a reset. It decides whether to do a plain hub port reset or
call the usb_reset_device() function based on whether there was a device
attached to the port.

However, there are device/hub combinations (found with a JetFlash
Transcend mass storage stick (8564:1000) on the root hub of an Intel
LynxPoint PCH) which can transition to the SS.Inactive state on
disconnect (and stay there long enough for the host to notice). In this
case, above-mentioned reset check will call usb_reset_device() on the
stale device data structure. The kernel will send pointless LPM control
messages to the no longer connected device address and can even cause
several 5 second khubd stalls on some (buggy?) host controllers, before
finally accepting the device's fate amongst a flurry of error messages.

This patch makes the choice of reset dependent on the port status that
has just been read from the hub in addition to the existence of an
in-kernel data structure for the device, and only proceeds with the more
extensive reset if both are valid.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add more RT Systems ftdi devices 2013-08-04T08:25:59+00:00 Rick Farina (Zero_Chaos) zerochaos@gentoo.org 2013-07-29T19:17:59+00:00 428f268ed0c72fb48e72029d8d0ca540d63ec717 commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream. RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream.

RT Systems makes many usb serial cables based on the ftdi_sio driver for
programming various amateur radios.  This patch is a full listing of
their current product offerings and should allow these cables to all
be recognized.

Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Clear both buffers when clearing a control transfer TT buffer. 2013-08-04T08:25:53+00:00 William Gulland wgulland@google.com 2013-06-27T23:10:20+00:00 9e914980a5d558f38ba9a0176a4bdea8def9b99b commit 2c7b871b9102c497ba8f972aa5d38532f05b654d upstream. Control transfers have both IN and OUT (or SETUP) packets, so when clearing TT buffers for a control transfer it's necessary to send two HUB_CLEAR_TT_BUFFER requests to the hub. Signed-off-by: William Gulland <wgulland@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2c7b871b9102c497ba8f972aa5d38532f05b654d upstream.

Control transfers have both IN and OUT (or SETUP) packets, so when
clearing TT buffers for a control transfer it's necessary to send
two HUB_CLEAR_TT_BUFFER requests to the hub.

Signed-off-by: William Gulland <wgulland@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga 2013-08-04T08:25:52+00:00 Jóhann B. Guðmundsson johannbg@fedoraproject.org 2013-07-04T21:47:52+00:00 06b19056b9fe16a5b235510acd125974db9d7678 commit 58fc90db8261b571c026bb8bf23aad48a7233118 upstream. Signed-off-by: Jóhann B. Guðmundsson <johannbg@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 58fc90db8261b571c026bb8bf23aad48a7233118 upstream.

Signed-off-by: Jóhann B. Guðmundsson <johannbg@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ti_usb_3410_5052: fix dynamic-id matching 2013-08-04T08:25:50+00:00 Johan Hovold jhovold@gmail.com 2013-06-28T10:24:26+00:00 9f510a82588f91ca1d83606fcde730104e70b348 commit 1fad56424f5ad3ce4973505a357212b2e2282b3f upstream. The driver failed to take the dynamic ids into account when determining the device type and therefore all devices were detected as 2-port devices when using the dynamic-id interface. Match on the usb-serial-driver field instead of doing redundant id-table searches. Reported-by: Anders Hammarquist <iko@iko.pp.se> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1fad56424f5ad3ce4973505a357212b2e2282b3f upstream.

The driver failed to take the dynamic ids into account when determining
the device type and therefore all devices were detected as 2-port
devices when using the dynamic-id interface.

Match on the usb-serial-driver field instead of doing redundant id-table
searches.

Reported-by: Anders Hammarquist <iko@iko.pp.se>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: gadget: don't prevent gadget from being probed if we fail 2013-08-04T08:25:50+00:00 Felipe Balbi balbi@ti.com 2013-07-15T09:36:35+00:00 1b5c94b7ed5a0037d7327a385967763fa41ba72c commit cdcedd6981194e511cc206887db661d016069d68 upstream. In case we fail our ->udc_start() callback, we should be ready to accept another modprobe following the failed one. We had forgotten to clear dwc->gadget_driver back to NULL and, because of that, we were preventing gadget driver modprobe from being retried. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cdcedd6981194e511cc206887db661d016069d68 upstream.

In case we fail our ->udc_start() callback, we
should be ready to accept another modprobe following
the failed one.

We had forgotten to clear dwc->gadget_driver back
to NULL and, because of that, we were preventing
gadget driver modprobe from being retried.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: fix wrong bit mask in dwc3_event_type 2013-08-04T08:25:49+00:00 Huang Rui ray.huang@amd.com 2013-06-26T17:08:11+00:00 76d54f0afc8f8cfea8ad8ea1b7c9e2fda617d48a commit 1974d494dea05ea227cb42f5e918828801e237aa upstream. Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the bit is 1, the event is represented Device-Specific Event, then use [7:1] bits as Device Specific Event to marked the type. It has 7 bits, and we can see the reserved8_31 variable name which means from 8 to 31 bits marked reserved, actually there are 24 bits not 25 bits between that. And 1 + 7 + 24 = 32, the event size is 4 byes. So in dwc3_event_type, the bit mask should be: is_devspec [0] 1 bit type [7:1] 7 bits reserved8_31 [31:8] 24 bits This patch should be backported to kernels as old as 3.2, that contain the commit 72246da40f3719af3bfd104a2365b32537c27d83 "usb: Introduce DesignWare USB3 DRD Driver". Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1974d494dea05ea227cb42f5e918828801e237aa upstream.

Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the
Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the
bit is 1, the event is represented Device-Specific Event, then use
[7:1] bits as Device Specific Event to marked the type. It has 7 bits,
and we can see the reserved8_31 variable name which means from 8 to 31
bits marked reserved, actually there are 24 bits not 25 bits between
that. And 1 + 7 + 24 = 32, the event size is 4 byes.

So in dwc3_event_type, the bit mask should be:
is_devspec	[0]		1  bit
type		[7:1]		7  bits
reserved8_31	[31:8]		24 bits

This patch should be backported to kernels as old as 3.2, that contain
the commit 72246da40f3719af3bfd104a2365b32537c27d83 "usb: Introduce
DesignWare USB3 DRD Driver".

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Avoid NULL pointer deref when host dies. 2013-08-04T08:25:48+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-07-24T17:27:13+00:00 79bc1750fe6730db008745dee617f2e32789d3f9 commit 203a86613fb3bf2767335659513fa98563a3eb71 upstream. When the host controller fails to respond to an Enable Slot command, and the host fails to respond to the register write to abort the command ring, the xHCI driver will assume the host is dead, and call usb_hc_died(). The USB device's slot_id is still set to zero, and the pointer stored at xhci->devs[0] will always be NULL. The call to xhci_check_args in xhci_free_dev should have caught the NULL virt_dev pointer. However, xhci_free_dev is designed to free the xhci_virt_device structures, even if the host is dead, so that we don't leak kernel memory. xhci_free_dev checks the return value from the generic xhci_check_args function. If the return value is -ENODEV, it carries on trying to free the virtual device. The issue is that xhci_check_args looks at the host controller state before it looks at the xhci_virt_device pointer. It will return -ENIVAL because the host is dead, and xhci_free_dev will ignore the return value, and happily dereference the NULL xhci_virt_device pointer. The fix is to make sure that xhci_check_args checks the xhci_virt_device pointer before it checks the host state. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203453 for further details. This patch doesn't solve the underlying issue, but will ensure we don't see any more NULL pointer dereferences because of the issue. This patch should be backported to kernels as old as 3.1, that contain the commit 7bd89b4017f46a9b92853940fd9771319acb578a "xhci: Don't submit commands or URBs to halted hosts." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Vincent Thiele <vincentthiele@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 203a86613fb3bf2767335659513fa98563a3eb71 upstream.

When the host controller fails to respond to an Enable Slot command, and
the host fails to respond to the register write to abort the command
ring, the xHCI driver will assume the host is dead, and call
usb_hc_died().

The USB device's slot_id is still set to zero, and the pointer stored at
xhci->devs[0] will always be NULL.  The call to xhci_check_args in
xhci_free_dev should have caught the NULL virt_dev pointer.

However, xhci_free_dev is designed to free the xhci_virt_device
structures, even if the host is dead, so that we don't leak kernel
memory.  xhci_free_dev checks the return value from the generic
xhci_check_args function.  If the return value is -ENODEV, it carries on
trying to free the virtual device.

The issue is that xhci_check_args looks at the host controller state
before it looks at the xhci_virt_device pointer.  It will return -ENIVAL
because the host is dead, and xhci_free_dev will ignore the return
value, and happily dereference the NULL xhci_virt_device pointer.

The fix is to make sure that xhci_check_args checks the xhci_virt_device
pointer before it checks the host state.

See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203453 for
further details.  This patch doesn't solve the underlying issue, but
will ensure we don't see any more NULL pointer dereferences because of
the issue.

This patch should be backported to kernels as old as 3.1, that
contain the commit 7bd89b4017f46a9b92853940fd9771319acb578a "xhci: Don't
submit commands or URBs to halted hosts."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Vincent Thiele <vincentthiele@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>