linux-toradex.git/drivers/usb, branch v4.10

Merge tag 'usb-serial-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2017-02-03T21:19:15+00:00

Johan writes:

USB-serial fixes for v4.10-rc7

One more device ID for pl2303.

Signed-off-by: Johan Hovold

USB: serial: pl2303: add ATEN device ID

2017-01-31T16:27:04+00:00

Seems that ATEN serial-to-usb devices using pl2303 exist with
different device ids. This patch adds a missing device ID so it
is recognised by the driver.

Signed-off-by: Marcel J.E. Mol 
Cc: stable 
Signed-off-by: Johan Hovold

Merge tag 'usb-serial-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2017-01-27T15:01:52+00:00

Johan writes:

USB-serial fixes for v4.10-rc6

Just a couple of new device ids.

Signed-off-by: Johan Hovold

usb: gadget: f_fs: Assorted buffer overflow checks.

2017-01-25T11:03:52+00:00

OS descriptor head, when flagged as provided, is accessed without
checking if it fits in provided buffer. Verify length before access.
Also, there are other places where buffer length it checked
after accessing offsets which are potentially past the end. Check
buffer length before as well to fail cleanly.

Signed-off-by: Vincent Pelletier 
Acked-by: Felipe Balbi 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: Add quirk for WORLDE easykey.25 MIDI keyboard

2017-01-25T10:02:29+00:00

Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218,
idProduct=0401). The device reports that it has config string
descriptor at index 3, but when the system selects the configuration
and tries to get the description, it returns a -EPROTO error,
the communication restarts and this keeps repeating over and over again.
Not requesting the string descriptor makes the device work correctly.

Relevant info from Wireshark:

[...]

CONFIGURATION DESCRIPTOR
    bLength: 9
    bDescriptorType: 0x02 (CONFIGURATION)
    wTotalLength: 101
    bNumInterfaces: 2
    bConfigurationValue: 1
    iConfiguration: 3
    Configuration bmAttributes: 0xc0  SELF-POWERED  NO REMOTE-WAKEUP
        1... .... = Must be 1: Must be 1 for USB 1.1 and higher
        .1.. .... = Self-Powered: This device is SELF-POWERED
        ..0. .... = Remote Wakeup: This device does NOT support remote wakeup
    bMaxPower: 50  (100mA)

[...]

     45 0.369104       host                  2.38.0                USB      64     GET DESCRIPTOR Request STRING

[...]

URB setup
    bmRequestType: 0x80
        1... .... = Direction: Device-to-host
        .00. .... = Type: Standard (0x00)
        ...0 0000 = Recipient: Device (0x00)
    bRequest: GET DESCRIPTOR (6)
    Descriptor Index: 0x03
    bDescriptorType: 0x03
    Language Id: English (United States) (0x0409)
    wLength: 255

     46 0.369255       2.38.0                host                  USB      64     GET DESCRIPTOR Response STRING[Malformed Packet]

[...]

Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0
USB URB
    [Source: 2.38.0]
    [Destination: host]
    URB id: 0xffff88021f62d480
    URB type: URB_COMPLETE ('C')
    URB transfer type: URB_CONTROL (0x02)
    Endpoint: 0x80, Direction: IN
    Device: 38
    URB bus id: 2
    Device setup request: not relevant ('-')
    Data: present (0)
    URB sec: 1484896277
    URB usec: 455031
    URB status: Protocol error (-EPROTO) (-71)
    URB length [bytes]: 0
    Data length [bytes]: 0
    [Request in: 45]
    [Time from request: 0.000151000 seconds]
    Unused Setup Header
    Interval: 0
    Start frame: 0
    Copy of Transfer Flags: 0x00000200
    Number of ISO descriptors: 0
[Malformed Packet: USB]
    [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
        [Malformed Packet (Exception occurred)]
        [Severity level: Error]
        [Group: Malformed]

Signed-off-by: Lukáš Lalinský 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: musb: Fix external abort on non-linefetch for musb_irq_work()

2017-01-25T10:02:29+00:00

While testing musb host mode cable plugging on a BeagleBone, I came across this
error:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xd1dcfc60
...
[] (musb_default_readb [musb_hdrc]) from [] (musb_irq_work+0x1c/0x180 [musb_hdrc])
[] (musb_irq_work [musb_hdrc]) from [] (process_one_work+0x2b4/0x808)
[] (process_one_work) from [] (worker_thread+0x3c/0x550)
[] (worker_thread) from [] (kthread+0x104/0x148)
[] (kthread) from [] (ret_from_fork+0x14/0x24)

Signed-off-by: Tony Lindgren 
Signed-off-by: Bin Liu 
Signed-off-by: Greg Kroah-Hartman

usb: musb: Fix host mode error -71 regression

2017-01-25T10:02:29+00:00

Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for
musb-core") started implementing musb generic runtime PM support by
introducing devctl register session bit based state control.

This caused a regression where if a USB mass storage device is connected
to a USB hub, we can get:

usb 1-1: reset high-speed USB device number 2 using musb-hdrc
usb 1-1: device descriptor read/64, error -71
usb 1-1.1: new high-speed USB device number 4 using musb-hdrc

This is because before the USB storage device is connected, musb is
in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume
in musb_stage0_irq() and the related code calling finish_resume_work
in musb_resume() and musb_runtime_resume() never gets called.

To fix the issue, we can call schedule_delayed_work() directly in
musb_stage0_irq() to have finish_resume_work run.

And we should no longer never get interrupts when when suspended.
We have changed musb to no longer need pm_runtime_irqsafe().
The need_finish_resume flag was added in commit 9298b4aad37e ("usb:
musb: fix device hotplug behind hub") and no longer applies as far
as I can tell. So let's just remove the earlier code that no longer
is needed.

Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Reported-by: Bin Liu 
Signed-off-by: Tony Lindgren 
Signed-off-by: Bin Liu 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add device ID for HP lt2523 (Novatel E371)

2017-01-24T11:07:28+00:00

Yet another laptop vendor rebranded Novatel E371.

Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold

xhci: remove WARN_ON if dma mask is not set for platform devices

2017-01-20T13:55:20+00:00

The warn on is a bit too much, we will anyway set the dma mask if not set
previously.

The main reason for this fix is that 4.10-rc1  has a dwc3 change that
pass a parent sysdev dev pointer instead of setting the dma mask of
its xhci platform device. xhci platform driver can then get more
attributes from the sysdev than just the dma mask.

The usb core and xhci changes are not yet in 4.10, and a fix like
this was preferred instead of taking those big changes this late in
the rc-cycle.

Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add Dell DW5570 QDL

2017-01-19T08:08:37+00:00

The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by
default boot with vid 0x413c and pid 0x81a3. When triggered QDL download
mode, the device switches to pid 0x81a6 and provides the standard TTY
used for firmware upgrade.

Cc: 
Signed-off-by: Aleksander Morgado 
Signed-off-by: Johan Hovold