linux-toradex.git/drivers/usb, branch v4.17

usbip: usbip_host: fix bad unlock balance during stub_probe()

2018-05-16T16:52:13+00:00

stub_probe() calls put_busid_priv() in an error path when device isn't
found in the busid_table. Fix it by making put_busid_priv() safe to be
called with null struct bus_id_priv pointer.

This problem happens when "usbip bind" is run without loading usbip_host
driver and then running modprobe. The first failed bind attempt unbinds
the device from the original driver and when usbip_host is modprobed,
stub_probe() runs and doesn't find the device in its busid table and calls
put_busid_priv(0 with null bus_id_priv pointer.

usbip-host 3-10.2: 3-10.2 is not in match_busid table...  skip!

[  367.359679] =====================================
[  367.359681] WARNING: bad unlock balance detected!
[  367.359683] 4.17.0-rc4+ #5 Not tainted
[  367.359685] -------------------------------------
[  367.359688] modprobe/2768 is trying to release lock (
[  367.359689]
==================================================================
[  367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110
[  367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768

[  367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5

Fixes: 22076557b07c ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus
Signed-off-by: Shuah Khan (Samsung OSG) 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usbip: usbip_host: fix NULL-ptr deref and use-after-free errors

2018-05-15T07:52:02+00:00

usbip_host updates device status without holding lock from stub probe,
disconnect and rebind code paths. When multiple requests to import a
device are received, these unprotected code paths step all over each
other and drive fails with NULL-ptr deref and use-after-free errors.

The driver uses a table lock to protect the busid array for adding and
deleting busids to the table. However, the probe, disconnect and rebind
paths get the busid table entry and update the status without holding
the busid table lock. Add a new finer grain lock to protect the busid
entry. This new lock will be held to search and update the busid entry
fields from get_busid_idx(), add_match_busid() and del_match_busid().

match_busid_show() does the same to access the busid entry fields.

get_busid_priv() changed to return the pointer to the busid entry holding
the busid lock. stub_probe(), stub_disconnect() and stub_device_rebind()
call put_busid_priv() to release the busid lock before returning. This
changes fixes the unprotected code paths eliminating the race conditions
in updating the busid entries.

Reported-by: Jakub Jirasek
Signed-off-by: Shuah Khan (Samsung OSG) 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usbip: usbip_host: run rebind from exit when module is removed

2018-05-15T07:47:52+00:00

After removing usbip_host module, devices it releases are left without
a driver. For example, when a keyboard or a mass storage device are
bound to usbip_host when it is removed, these devices are no longer
bound to any driver.

Fix it to run device_attach() from the module exit routine to restore
the devices to their original drivers. This includes cleanup changes
and moving device_attach() code to a common routine to be called from
rebind_store() and usbip_host_exit().

Signed-off-by: Shuah Khan (Samsung OSG) 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usbip: usbip_host: delete device from busid_table after rebind

2018-05-15T07:47:47+00:00

Device is left in the busid_table after unbind and rebind. Rebind
initiates usb bus scan and the original driver claims the device.
After rescan the device should be deleted from the busid_table as
it no longer belongs to usbip_host.

Fix it to delete the device after device_attach() succeeds.

Signed-off-by: Shuah Khan (Samsung OSG) 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usbip: usbip_host: refine probe and disconnect debug msgs to be useful

2018-05-15T07:47:41+00:00

Refine probe and disconnect debug msgs to be useful and say what is
in progress.

Signed-off-by: Shuah Khan 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: musb: fix remote wakeup racing with suspend

2018-05-14T15:04:06+00:00

It has been observed that writing 0xF2 to the power register while it
reads as 0xF4 results in the register having the value 0xF0, i.e. clearing
RESUME and setting SUSPENDM in one go does not work. It might also violate
the USB spec to transition directly from resume to suspend, especially
when not taking T_DRSMDN into account. But this is what happens when a
remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the
root hub and musb_bus_suspend being called.

This commit returns -EBUSY when musb_bus_suspend is called while remote
wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring
this error when musb_port_suspend is called from musb_hub_control is ok.

Signed-off-by: Daniel Glöckner 
Signed-off-by: Bin Liu 
Signed-off-by: Greg Kroah-Hartman

xhci: Fix USB3 NULL pointer dereference at logical disconnect.

2018-05-14T09:05:53+00:00

Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.

This can be triggered with "udisksctl power-off --block-device "
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.

USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.

hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).

The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.

The regression was caused by, and whole thing revealed by,
Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.

Fix this by checking xhci->devs[i]->udev exists before setting link state.

The original patch went to stable so this fix needs to be applied there as
well.

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: 
Reported-by: Jordan Glover 
Tested-by: Jordan Glover 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-serial-4.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2018-05-04T21:38:32+00:00

Johan writes:

USB-serial fixes for v4.17-rc4

Here's a fix for a long-standing issue in the visor driver, which could
have security implications. Included is also a new modem device id.

Both commits have been in linux-next for a couple of days with no
reported issues.

Signed-off-by: Johan Hovold

Revert "usb: host: ehci: Use dma_pool_zalloc()"

2018-05-04T21:35:12+00:00

This reverts commit 22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is
broken.

Alan writes:
	What you can't see just from reading the patch is that in both
	cases (ehci->itd_pool and ehci->sitd_pool) there are two
	allocation paths -- the two branches of an "if" statement -- and
	only one of the paths calls dma_pool_[z]alloc.  However, the
	memset is needed for both paths, and so it can't be eliminated.
	Given that it must be present, there's no advantage to calling
	dma_pool_zalloc rather than dma_pool_alloc.

Reported-by: Erick Cafferata 
Cc: Alan Stern 
Cc: Souptick Joarder 
Signed-off-by: Greg Kroah-Hartman

usb: typec: tps6598x: handle block reads separately with plain-I2C adapters

2018-05-03T17:55:31+00:00

If the I2C adapter that the PD controller is attached to
does not support SMBus protocol, the driver needs to handle
block reads separately. The first byte returned in block
read protocol will show the total number of bytes. It needs
to be stripped away.

This is handled separately in the driver only because right
now we have no way of requesting the used protocol with
regmap-i2c. This is in practice a workaround for what is
really a problem in regmap-i2c. The other option would have
been to register custom regmap, or not use regmap at all,
however, since the solution is very simple, I choose to use
it in this case for convenience. It is easy to remove once
we figure out how to handle this kind of cases in
regmap-i2c.

Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Reviewed-by: Guenter Roeck 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman