linux-toradex.git/drivers/usb, branch v4.4.153

usb: xhci: increase CRS timeout value

2018-08-24T11:26:56+00:00

[ Upstream commit 305886ca87be480ae159908c2affd135c04215cf ]

Some controllers take almost 55ms to complete controller
restore state (CRS).
There is no timeout limit mentioned in xhci specification so
fixing the issue by increasing the timeout limit to 100ms

[reformat code comment -Mathias]
Signed-off-by: Ajay Gupta 
Signed-off-by: Nagaraj Annaiah 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: dwc2: fix memory leak in gadget_init()

2018-08-24T11:26:54+00:00

[ Upstream commit 9bb073a053f0464ea74a4d4c331fdb7da58568d6 ]

Freed allocated request for ep0 to prevent memory leak in case when
dwc2_driver_probe() failed.

Cc: Stefan Wahren 
Cc: Marek Szyprowski 
Tested-by: Stefan Wahren 
Tested-by: Marek Szyprowski 
Acked-by: Minas Harutyunyan 
Signed-off-by: Grigor Tovmasyan 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: composite: fix delayed_status race condition when set_interface

2018-08-24T11:26:54+00:00

[ Upstream commit 980900d6318066b9f8314bfb87329a20fd0d1ca4 ]

It happens when enable debug log, if set_alt() returns
USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue()
is called before increasing count of @delayed_status,
so fix it by using spinlock of @cdev->lock.

Signed-off-by: Chunfeng Yun 
Tested-by: Jay Hsu 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: dwc2: fix isoc split in transfer with no data

2018-08-24T11:26:54+00:00

[ Upstream commit 70c3c8cb83856758025c2a211dd022bc0478922a ]

If isoc split in transfer with no data (the length of DATA0
packet is zero), we can't simply return immediately. Because
the DATA0 can be the first transaction or the second transaction
for the isoc split in transaction. If the DATA0 packet with no
data is in the first transaction, we can return immediately.
But if the DATA0 packet with no data is in the second transaction
of isoc split in transaction sequence, we need to increase the
qtd->isoc_frame_index and giveback urb to device driver if needed,
otherwise, the MDATA packet will be lost.

A typical test case is that connect the dwc2 controller with an
usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics
headset) into the downstream port of Hub. Then use the usb mic
to record, we can find noise when playback.

In the case, the isoc split in transaction sequence like this:

- SSPLIT IN transaction
- CSPLIT IN transaction
  - MDATA packet (176 bytes)
- CSPLIT IN transaction
  - DATA0 packet (0 byte)

This patch use both the length of DATA0 and qtd->isoc_split_offset
to check if the DATA0 is in the second transaction.

Tested-by: Gevorg Sahakyan 
Tested-by: Heiko Stuebner 
Acked-by: Minas Harutyunyan hminas@synopsys.com>
Signed-off-by: William Wu 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

USB: option: add support for DW5821e

2018-08-22T05:48:37+00:00

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream.

The device exposes AT, NMEA and DIAG ports in both USB configurations.

The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: serial: sierra: fix potential deadlock at close

2018-08-22T05:48:37+00:00

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.

The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.

Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable 
Signed-off-by: John Ogness 
Signed-off-by: Sebastian Andrzej Siewior 
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: hub: Don't wait for connect state at resume for powered-off ports

2018-08-06T14:24:39+00:00

[ Upstream commit 5d111f5190848d6fb1c414dc57797efea3526a2f ]

wait_for_connected() wait till a port change status to
USB_PORT_STAT_CONNECTION, but this is not possible if
the port is unpowered. The loop will only exit at timeout.

Such case take place if an over-current incident happen
while system is in S3. Then during resume wait_for_connected()
will wait 2s, which may be noticeable by the user.

Signed-off-by: Dominik Bozek 
Signed-off-by: Kuppuswamy Sathyanarayanan 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Only return delayed status when len is 0

2018-07-28T05:45:03+00:00

commit 4d644abf25698362bd33d17c9ddc8f7122c30f17 upstream.

Commit 1b9ba000 ("Allow function drivers to pause control
transfers") states that USB_GADGET_DELAYED_STATUS is only
supported if data phase is 0 bytes.

It seems that when the length is not 0 bytes, there is no
need to explicitly delay the data stage since the transfer
is not completed until the user responds. However, when the
length is 0, there is no data stage and the transfer is
finished once setup() returns, hence there is a need to
explicitly delay completion.

This manifests as the following bugs:

Prior to 946ef68ad4e4 ('Let setup() return
USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs
would require user to queue a 0 byte request in order to
clear setup state. However, that 0 byte request was actually
not needed and would hang and cause errors in other setup
requests.

After the above commit, 0 byte setups work since the gadget
now accepts empty queues to ep0 to clear the delay, but all
other setups hang.

Fixes: 946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS")
Signed-off-by: Jerry Zhang 
Cc: stable 
Acked-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: core: handle hub C_PORT_OVER_CURRENT condition

2018-07-28T05:45:03+00:00

commit 249a32b7eeb3edb6897dd38f89651a62163ac4ed upstream.

Based on USB2.0 Spec Section 11.12.5,

  "If a hub has per-port power switching and per-port current limiting,
  an over-current on one port may still cause the power on another port
  to fall below specific minimums. In this case, the affected port is
  placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the
  port, but PORT_OVER_CURRENT is not set."

so let's check C_PORT_OVER_CURRENT too for over current condition.

Fixes: 08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens")
Cc: 
Tested-by: Alessandro Antenucci 
Signed-off-by: Bin Liu 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Castles VEGA3000

2018-07-28T05:45:03+00:00

commit 1445cbe476fc3dd09c0b380b206526a49403c071 upstream.

The device (a POS terminal) implements CDC ACM, but has not union
descriptor.

Signed-off-by: Lubomir Rintel 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman