linux-toradex.git/drivers/usb, branch v4.9.20

usb: musb: fix possible spinlock deadlock

2017-03-31T08:31:46+00:00

commit bc1e2154542071e3cfe1734b143af9b8bdacf8bd upstream.

The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren 
Signed-off-by: Bin Liu 
Signed-off-by: Greg Kroah-Hartman

USB: usbtmc: fix probe error path

2017-03-30T07:41:24+00:00

commit 2e47c53503eb9faff42b3cfa144a833344dd1f89 upstream.

Make sure to initialise the return value to avoid having allocation
failures going unnoticed when allocating interrupt-endpoint resources.

This prevents use-after-free or worse when the device is later unbound.

Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Cc: Dave Penkler 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: usbtmc: add missing endpoint sanity check

2017-03-30T07:41:24+00:00

commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream.

USBTMC devices are required to have a bulk-in and a bulk-out endpoint,
but the driver failed to verify this, something which could lead to the
endpoint addresses being taken from uninitialised memory.

Make sure to zero all private data as part of allocation, and add the
missing endpoint sanity check.

Note that this also addresses a more recently introduced issue, where
the interrupt-in-presence flag would also be uninitialised whenever the
optional interrupt-in endpoint is not present. This in turn could lead
to an interrupt urb being allocated, initialised and submitted based on
uninitialised values.

Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix crash after failure to read BOS descriptor

2017-03-30T07:41:24+00:00

commit 7b2db29fbb4e766fcd02207eb2e2087170bd6ebc upstream.

If usb_get_bos_descriptor() returns an error, usb->bos will be NULL.
Nevertheless, it is dereferenced unconditionally in
hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set.
This results in a crash.

usb 5-1: unable to get BOS descriptor
...
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = ffffffc00165f000
[00000008] *pgd=000000000174f003, *pud=000000000174f003,
		*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ]
CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G    B 4.4.52 #480
Hardware name: Google Kevin (DT)
Workqueue: events driver_set_config_work
task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000
PC is at hub_port_init+0xc3c/0xd10
LR is at hub_port_init+0xc3c/0xd10
...
Call trace:
[] hub_port_init+0xc3c/0xd10
[] usb_reset_and_verify_device+0x15c/0x82c
[] usb_reset_device+0xe4/0x298
[] rtl8152_probe+0x84/0x9b0 [r8152]
[] usb_probe_interface+0x244/0x2f8
[] driver_probe_device+0x180/0x3b4
[] __device_attach_driver+0xb4/0xe0
[] bus_for_each_drv+0xb4/0xe4
[] __device_attach+0xd0/0x158
[] device_initial_probe+0x24/0x30
[] bus_probe_device+0x50/0xe4
[] device_add+0x414/0x738
[] usb_set_configuration+0x89c/0x914
[] driver_set_config_work+0xc0/0xf0
[] process_one_work+0x390/0x6b8
[] worker_thread+0x480/0x610
[] kthread+0x164/0x178
[] ret_from_fork+0x10/0x40

Since we don't know anything about LPM capabilities without BOS descriptor,
don't attempt to enable LPM if it is not available.

Fixes: 890dae886721 ("xhci: Enable LPM support only for hardwired ...")
Cc: Mathias Nyman 
Signed-off-by: Guenter Roeck 
Acked-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer

2017-03-30T07:41:24+00:00

commit 0090114d336a9604aa2d90bc83f20f7cd121b76c upstream.

The CPPI 4.1 driver polls register to workaround the premature TX
interrupt issue, but it causes audio playback underrun when triggered in
Isoch transfers.

Isoch doesn't do back-to-back transfers, the TX should be done by the
time the next transfer is scheduled. So skip this polling workaround for
Isoch transfer.

Fixes: a655f481d83d6 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt")
Reported-by: Alexandre Bailon 
Acked-by: Sebastian Andrzej Siewior 
Tested-by: Alexandre Bailon 
Signed-off-by: Bin Liu 
Signed-off-by: Greg Kroah-Hartman

USB: wusbcore: fix NULL-deref at probe

2017-03-30T07:41:24+00:00

commit 03ace948a4eb89d1cf51c06afdfc41ebca5fdb27 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

This specifically fixes the NULL-pointer dereference when probing HWA HC
devices.

Fixes: df3654236e31 ("wusb: add the Wire Adapter (WA) core")
Cc: Inaky Perez-Gonzalez 
Cc: David Vrabel 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: idmouse: fix NULL-deref at probe

2017-03-30T07:41:24+00:00

commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: lvtest: fix NULL-deref at probe

2017-03-30T07:41:24+00:00

commit 1dc56c52d2484be09c7398a5207d6b11a4256be9 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should the probed device lack endpoints.

Note that this driver does not bind to any devices by default.

Fixes: ce21bfe603b3 ("USB: Add LVS Test device driver")
Cc: Pratyush Anand 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: uss720: fix NULL-deref at probe

2017-03-30T07:41:24+00:00

commit f259ca3eed6e4b79ac3d5c5c9fb259fb46e86217 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Note that the endpoint access that causes the NULL-deref is currently
only used for debugging purposes during probe so the oops only happens
when dynamic debugging is enabled. This means the driver could be
rewritten to continue to accept device with only two endpoints, should
such devices exist.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-03-30T07:41:24+00:00

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream.

Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.

The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms.  It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies.  The generic config code does not
catch this case because the 64ms is considered a sane enough value.

This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.

Signed-off-by: Samuel Thibault 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman