<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/vfio/pci, branch v3.13.9</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>vfio-pci: PCI hot reset interface</title>
<updated>2013-09-04T17:28:04+00:00</updated>
<author>
<name>Alex Williamson</name>
<email>alex.williamson@redhat.com</email>
</author>
<published>2013-09-04T17:28:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8b27ee60bfd6bbb84d2df28fa706c5c5081066ca'/>
<id>8b27ee60bfd6bbb84d2df28fa706c5c5081066ca</id>
<content type='text'>
The current VFIO_DEVICE_RESET interface only maps to PCI use cases
where we can isolate the reset to the individual PCI function.  This
means the device must support FLR (PCIe or AF), PM reset on D3hot-&gt;D0
transition, device specific reset, or be a singleton device on a bus
for a secondary bus reset.  FLR does not have widespread support,
PM reset is not very reliable, and bus topology is dictated by the
system and device design.  We need to provide a means for a user to
induce a bus reset in cases where the existing mechanisms are not
available or not reliable.

This device specific extension to VFIO provides the user with this
ability.  Two new ioctls are introduced:
 - VFIO_DEVICE_PCI_GET_HOT_RESET_INFO
 - VFIO_DEVICE_PCI_HOT_RESET

The first provides the user with information about the extent of
devices affected by a hot reset.  This is essentially a list of
devices and the IOMMU groups they belong to.  The user may then
initiate a hot reset by calling the second ioctl.  We must be
careful that the user has ownership of all the affected devices
found via the first ioctl, so the second ioctl takes a list of file
descriptors for the VFIO groups affected by the reset.  Each group
must have IOMMU protection established for the ioctl to succeed.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The current VFIO_DEVICE_RESET interface only maps to PCI use cases
where we can isolate the reset to the individual PCI function.  This
means the device must support FLR (PCIe or AF), PM reset on D3hot-&gt;D0
transition, device specific reset, or be a singleton device on a bus
for a secondary bus reset.  FLR does not have widespread support,
PM reset is not very reliable, and bus topology is dictated by the
system and device design.  We need to provide a means for a user to
induce a bus reset in cases where the existing mechanisms are not
available or not reliable.

This device specific extension to VFIO provides the user with this
ability.  Two new ioctls are introduced:
 - VFIO_DEVICE_PCI_GET_HOT_RESET_INFO
 - VFIO_DEVICE_PCI_HOT_RESET

The first provides the user with information about the extent of
devices affected by a hot reset.  This is essentially a list of
devices and the IOMMU groups they belong to.  The user may then
initiate a hot reset by calling the second ioctl.  We must be
careful that the user has ownership of all the affected devices
found via the first ioctl, so the second ioctl takes a list of file
descriptors for the VFIO groups affected by the reset.  Each group
must have IOMMU protection established for the ioctl to succeed.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfio-pci: Test for extended config space</title>
<updated>2013-09-04T16:58:52+00:00</updated>
<author>
<name>Alex Williamson</name>
<email>alex.williamson@redhat.com</email>
</author>
<published>2013-09-04T16:58:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=17638db1b88184d8895f3f4551c936d7480a1d3f'/>
<id>17638db1b88184d8895f3f4551c936d7480a1d3f</id>
<content type='text'>
Having PCIe/PCI-X capability isn't enough to assume that there are
extended capabilities.  Both specs define that the first capability
header is all zero if there are no extended capabilities.  Testing
for this avoids an erroneous message about hiding capability 0x0 at
offset 0x100.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Having PCIe/PCI-X capability isn't enough to assume that there are
extended capabilities.  Both specs define that the first capability
header is all zero if there are no extended capabilities.  Testing
for this avoids an erroneous message about hiding capability 0x0 at
offset 0x100.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfio-pci: Use fdget() rather than eventfd_fget()</title>
<updated>2013-08-28T15:49:55+00:00</updated>
<author>
<name>Alex Williamson</name>
<email>alex.williamson@redhat.com</email>
</author>
<published>2013-08-28T15:49:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=20e77457842f4cd253d093f08f0cce1a73afb7db'/>
<id>20e77457842f4cd253d093f08f0cce1a73afb7db</id>
<content type='text'>
eventfd_fget() tests to see whether the file is an eventfd file, which
we then immediately pass to eventfd_ctx_fileget(), which again tests
whether the file is an eventfd file.  Simplify slightly by using
fdget() so that we only test that we're looking at an eventfd once.
fget() could also be used, but fdget() makes use of fget_light() for
another slight optimization.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
eventfd_fget() tests to see whether the file is an eventfd file, which
we then immediately pass to eventfd_ctx_fileget(), which again tests
whether the file is an eventfd file.  Simplify slightly by using
fdget() so that we only test that we're looking at an eventfd once.
fget() could also be used, but fdget() makes use of fget_light() for
another slight optimization.

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfio-pci: Avoid deadlock on remove</title>
<updated>2013-07-24T22:36:41+00:00</updated>
<author>
<name>Alex Williamson</name>
<email>alex.williamson@redhat.com</email>
</author>
<published>2013-06-10T22:40:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d24cdbfd28b7e0ffecb1e281d73e73c03a57f734'/>
<id>d24cdbfd28b7e0ffecb1e281d73e73c03a57f734</id>
<content type='text'>
If an attempt is made to unbind a device from vfio-pci while that
device is in use, the request is blocked until the device becomes
unused.  Unfortunately, that unbind path still grabs the device_lock,
which certain things like __pci_reset_function() also want to take.
This means we need to try to acquire the locks ourselves and use the
pre-locked version, __pci_reset_function_locked().

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If an attempt is made to unbind a device from vfio-pci while that
device is in use, the request is blocked until the device becomes
unused.  Unfortunately, that unbind path still grabs the device_lock,
which certain things like __pci_reset_function() also want to take.
This means we need to try to acquire the locks ourselves and use the
pre-locked version, __pci_reset_function_locked().

Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfio: remap_pfn_range() sets all those flags...</title>
<updated>2013-06-29T08:46:41+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2013-05-11T16:33:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a47df1518efb9b5e9c5fc7cc7300e40f945a1f33'/>
<id>a47df1518efb9b5e9c5fc7cc7300e40f945a1f33</id>
<content type='text'>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio</title>
<updated>2013-05-02T21:02:32+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-05-02T21:02:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0b2e3b6bb4a415379f16e38fc92db42379be47a1'/>
<id>0b2e3b6bb4a415379f16e38fc92db42379be47a1</id>
<content type='text'>
Pull vfio updates from Alex Williamson:
 "Changes include extension to support PCI AER notification to
  userspace, byte granularity of PCI config space and access to
  unarchitected PCI config space, better protection around IOMMU driver
  accesses, default file mode fix, and a few misc cleanups."

* tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio:
  vfio: Set container device mode
  vfio: Use down_reads to protect iommu disconnects
  vfio: Convert container-&gt;group_lock to rwsem
  PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register
  vfio-pci: Enable raw access to unassigned config space
  vfio-pci: Use byte granularity in config map
  vfio: make local function vfio_pci_intx_unmask_handler() static
  VFIO-AER: Vfio-pci driver changes for supporting AER
  VFIO: Wrapper for getting reference to vfio_device
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull vfio updates from Alex Williamson:
 "Changes include extension to support PCI AER notification to
  userspace, byte granularity of PCI config space and access to
  unarchitected PCI config space, better protection around IOMMU driver
  accesses, default file mode fix, and a few misc cleanups."

* tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio:
  vfio: Set container device mode
  vfio: Use down_reads to protect iommu disconnects
  vfio: Convert container-&gt;group_lock to rwsem
  PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register
  vfio-pci: Enable raw access to unassigned config space
  vfio-pci: Use byte granularity in config map
  vfio: make local function vfio_pci_intx_unmask_handler() static
  VFIO-AER: Vfio-pci driver changes for supporting AER
  VFIO: Wrapper for getting reference to vfio_device
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci</title>
<updated>2013-04-29T16:30:25+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-04-29T16:30:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=96a3e8af5a54c324535472ca946215d5bafe6539'/>
<id>96a3e8af5a54c324535472ca946215d5bafe6539</id>
<content type='text'>
Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets &amp; cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets &amp; cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>vfio-pci: Use cached MSI/MSI-X capabilities</title>
<updated>2013-04-24T17:35:56+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2013-04-18T21:12:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a9047f24df85b06d3fd443ff76e9993bc127c570'/>
<id>a9047f24df85b06d3fd443ff76e9993bc127c570</id>
<content type='text'>
We now cache the MSI/MSI-X capability offsets in the struct pci_dev,
so no need to find the capabilities again.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We now cache the MSI/MSI-X capability offsets in the struct pci_dev,
so no need to find the capabilities again.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK</title>
<updated>2013-04-24T17:35:56+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2013-04-18T18:42:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=508d1aa602ef0679a9cfc181ce918fbc4a2b3a45'/>
<id>508d1aa602ef0679a9cfc181ce918fbc4a2b3a45</id>
<content type='text'>
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register</title>
<updated>2013-04-15T14:45:10+00:00</updated>
<author>
<name>Yijing Wang</name>
<email>wangyijing@huawei.com</email>
</author>
<published>2013-04-15T14:45:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=aa2cba51a0a85dfbd5be58239e59bc5e8b5fb7cf'/>
<id>aa2cba51a0a85dfbd5be58239e59bc5e8b5fb7cf</id>
<content type='text'>
Currently, we use pcie_flags_reg to cache PCI-E Capabilities Register,
because PCI-E Capabilities Register bits are almost read-only. This patch
use pcie_caps_reg() instead of another access PCI-E Capabilities Register.

Signed-off-by: Yijing Wang &lt;wangyijing@huawei.com&gt;
Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, we use pcie_flags_reg to cache PCI-E Capabilities Register,
because PCI-E Capabilities Register bits are almost read-only. This patch
use pcie_caps_reg() instead of another access PCI-E Capabilities Register.

Signed-off-by: Yijing Wang &lt;wangyijing@huawei.com&gt;
Signed-off-by: Alex Williamson &lt;alex.williamson@redhat.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
