linux-toradex.git/drivers/video/Makefile, branch v3.4.2 Linux kernel for Apalis and Colibri modules Resurrect Intel740 driver: i740fb 2012-02-15T04:31:21+00:00 Ondrej Zary linux@rainbow-software.org 2012-02-10T17:59:17+00:00 5350c65f4f15bbc111ffa629130d3f32cdd4ccf6 This is a resurrection of an old (like 2.4.19) out-of-tree driver for Intel740 graphics cards and adaptation for recent kernels. The old driver by Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/ This is a new driver based on skeletonfb, using most of the low level HW code from the old driver. The DDC code is completely new. The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II G460. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> 
This is a resurrection of an old (like 2.4.19) out-of-tree driver for
Intel740 graphics cards and adaptation for recent kernels. The old driver by
Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/

This is a new driver based on skeletonfb, using most of the low level HW code
from the old driver. The DDC code is completely new.

The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II
G460.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
video: support MIPI-DSI controller driver 2012-02-13T03:02:03+00:00 Donghwa Lee dh09.lee@samsung.com 2012-02-08T20:47:39+00:00 7258cc14f310b912b6fea5421aedb9beb69d8581 Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at machine code and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> 
Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and
MIPI-DSI based LCD Panel could be used with it.  This patch supports
MIPI-DSI driver based Samsung SoC chip.

LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
machine code and LCD panel driver specific function registered to
mipi_dsim_ddi structure at lcd panel init function called system init.  In
the MIPI-DSI driver, find lcd panel driver by using registered lcd panel
name, and then initialize lcd panel driver.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
fbdev: remove display subsystem 2011-11-11T16:46:18+00:00 Florian Tobias Schandinat FlorianSchandinat@gmx.de 2011-09-03T01:36:08+00:00 5a6b5e02d673486c96003d4a6e3e2510f4c59f92 This four year old subsystem does not have a single in-tree user not even in staging and as far as I know also none out-of-tree. I think that justifies removing it which cleans the config up. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> 
This four year old subsystem does not have a single in-tree user
not even in staging and as far as I know also none out-of-tree.
I think that justifies removing it which cleans the config up.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Add support for SMSC UFX6000/7000 USB display adapters 2011-09-05T16:21:30+00:00 Steve Glendinning steve.glendinning@smsc.com 2011-08-18T14:20:07+00:00 3c8a63e22a0802fd56380f6ab305b419f18eb6f5 This patch adds framebuffer suport for SMSC's UFX6000 (USB 2.0) and UFX7000 (USB 3.0) display adapters. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> 
This patch adds framebuffer suport for SMSC's UFX6000 (USB 2.0) and
UFX7000 (USB 3.0) display adapters.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
video: Add Aeroflex Gaisler GRVGA framebuffer device driver 2011-07-13T07:58:52+00:00 Kristoffer Glembo kristoffer@gaisler.com 2011-07-05T07:29:19+00:00 a4b8f97a8fdeb94492738c36fddbd2cf822ed138 This patch adds support for the GRVGA framebuffer IP core from Aeroflex Gaisler. The device is used in LEON SPARCV8 based System on Chips. Documentation can be found here: www.gaisler.com/products/grlib/grip.pdf. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
This patch adds support for the GRVGA framebuffer IP core from Aeroflex Gaisler.
The device is used in LEON SPARCV8 based System on Chips. Documentation can
be found here: www.gaisler.com/products/grlib/grip.pdf.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
sh_mobile_meram: MERAM framework for LCDC 2011-05-23T07:06:24+00:00 Damian dhobsong@igel.co.jp 2011-05-18T11:10:07+00:00 7caa4342ca5b37d2d178b464c16badd4228b3b7b Based on the patch by Takanari Hayama <taki@igel.co.jp> Adds support framework necessary to use Media RAM (MERAM) caching functionality with the LCDC. The MERAM is accessed through up to 4 Interconnect Buffers (ICBs). ICB numbers and MERAM address ranges to use are specified in by filling in the .meram_cfg member of the LCDC platform data Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
Based on the patch by Takanari Hayama <taki@igel.co.jp>

Adds support framework necessary to use Media RAM (MERAM)
caching functionality with the LCDC.  The MERAM is accessed
through up to 4 Interconnect Buffers (ICBs).

ICB numbers and MERAM address ranges to use are specified in
by filling in the .meram_cfg member of the LCDC platform data

Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm 2011-03-18T02:08:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-03-18T02:08:06+00:00 411f5c7a502769ccc0377c5ba36cb0b283847ba8 * 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig 
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig
unicore32 machine related: add frame buffer driver for pkunity-v3 soc 2011-03-17T01:19:20+00:00 GuanXuetao gxt@mprc.pku.edu.cn 2011-02-26T13:39:10+00:00 ce443ab5fd536941da1d529ba3963324f941fc29 change from original version -- by advice of Paul Mundt 1. remove videomemorysize definitions 2. remove unifb_enable and unifb_setup 3. use dev_warn instead of printk in fb driver 4. remove judgement for FB_ACCEL_PUV3_UNIGFX 5. adjust clk_get and clk_set_rate calls 6. add resources definitions 7. remove unifb_option 8. adjust register for platform_device 9. adjust unifb_ops position and unifb_regs assignment position Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> 
change from original version -- by advice of Paul Mundt
1. remove videomemorysize definitions
2. remove unifb_enable and unifb_setup
3. use dev_warn instead of printk in fb driver
4. remove judgement for FB_ACCEL_PUV3_UNIGFX
5. adjust clk_get and clk_set_rate calls
6. add resources definitions
7. remove unifb_option
8. adjust register for platform_device
9. adjust unifb_ops position and unifb_regs assignment position

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
video: Add i.MX23/28 framebuffer driver 2011-03-07T18:29:30+00:00 Sascha Hauer s.hauer@pengutronix.de 2011-01-14T14:22:31+00:00 f0a523b5e5e2db4e8518ae20f466c0a6be7e145e changes since v2: - use v3 and v4 for specifying the ip version instead of i.MX23/28. This is a better namespace when future versions are added. - rename mach/fb.h to mach/mxsfb.h changes since v1: - Add a LCDC_ prefix to the register names. - use set/clear registers where appropriate - protect call to mxsfb_disable_controller() in mxsfb_remove() with a (host->enabled) as suggested by Lothar Wassmann Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-fbdev@vger.kernel.org 
changes since v2:

- use v3 and v4 for specifying the ip version instead of i.MX23/28.
  This is a better namespace when future versions are added.
- rename mach/fb.h to mach/mxsfb.h

changes since v1:
- Add a LCDC_ prefix to the register names.
- use set/clear registers where appropriate
- protect call to mxsfb_disable_controller() in mxsfb_remove()
  with a (host->enabled) as suggested by Lothar Wassmann

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-fbdev@vger.kernel.org
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 2011-01-07T00:50:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-01-07T00:50:35+00:00 3c0cb7c31c206aaedb967e44b98442bbeb17a6c4 * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ... 
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...