linux-toradex.git/drivers/video/tdfxfb.c, branch v2.6.37.3

VIDEO: Correct use of request_region/request_mem_region

2010-08-05T12:25:38+00:00

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// 
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// 

Signed-off-by: Julia Lawall 
Signed-off-by: Ralf Baechle

tree-wide: fix assorted typos all over the place

2009-12-04T14:39:55+00:00

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa 
Signed-off-by: Jiri Kosina

i2c: Do not probe for TV chips on Voodoo3 adapters

2009-06-15T16:01:48+00:00

There's no point in giving the I2C bus of Voodoo3 adapters a class
value, there's no video chip driver checking for it anymore. If
support is ever needed, the video device should be instantiated
explicitly rather than probed.

To the best of my knowledge the only video chip that can be found on
these boards is a BT869 video encoder, for which no support exists
currently.

Signed-off-by: Jean Delvare 
Acked-by: Krzysztof Helt

tdfxfb: make use of DDC information about connected monitor

2009-04-07T15:31:09+00:00

Read DDC information from a connected monitor and use it to select initial
mode (if the mode is not specified).

Also, use the information to protect against modes outside the monitor
specs.

Signed-off-by: Krzysztof Helt 
Tested-by: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: move I2C functionality into the tdfxfb

2009-04-07T15:31:08+00:00

The I2C functionality provided by the i2c-voodoo3 driver is moved into the
tdfxfb (frame buffer driver for Voodoo3 cards).  This way there is no
conflict between the i2c driver and the fb driver.

The tdfxfb does not make use from the DDC functionality yet but provides
all the functionality of the i2c-voodoo3 driver.

Signed-off-by: Krzysztof Helt 
Acked-by: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: fix memory leaks in removal path

2009-04-01T15:59:30+00:00

We were leaking the cmap memory.

Signed-off-by: Andres Salomon 
Acked-by: Krzysztof Helt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: do not make changes to default tdfx_fix

2008-10-16T18:21:42+00:00

This was suggested by Geert Uytterhoeven to avoid overwriting of default
values from the tdfx_fix.

Signed-off-by: Krzysztof Helt 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: fix frame buffer name overrun

2008-09-03T02:21:39+00:00

If there are more then one graphics card handled by the tdfxfb driver the
name of the frame buffer overruns reserved size.

Signed-off-by: Krzysztof Helt 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: fix SDRAM memory size detection

2008-09-03T02:21:39+00:00

Fix memory detection on Voodoo3 cards with SDRAM memory.

Signed-off-by: Krzysztof Helt 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tdfxfb: remove ypan checks done by a higher layer

2008-07-24T17:47:38+00:00

These checks and assignments are done by a higher layer so remove them
from the driver.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds