linux-toradex.git/drivers/video/vesafb.c, branch v2.6.38-rc5

vesafb: fix comment a typo

2010-08-16T13:14:03+00:00

Signed-off-by: Justin P. Mattock 
Signed-off-by: Jiri Kosina

fbdev: allow passing more than one aperture for handoff

2010-05-18T06:19:27+00:00

It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.

Signed-off-by: Marcin Slusarz 
Cc: Eric Anholt 
Cc: Ben Skeggs 
Cc: Thomas Hellstrom 
Cc: Dave Airlie 
Cc: Peter Jones 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Dave Airlie

vesafb: use platform_driver_probe() instead of platform_driver_register()

2010-04-07T15:38:02+00:00

Commit c2e13037e6794bd0d9de3f9ecabf5615f15c160b ("platform-drivers: move
probe to .devinit.text in drivers/video") introduced a huge amount of
section mismatch warnings in vesafb code.  Rather than converting all of
the annotations, do the obvious and revert the __init -> __devinit change,
and use the recommended (in that patch) alternative to calling
platform_driver_register(): vesafb depends on information obtained from by
kernel at boot time, cannot be a module, and no post-boot devices can ever
show up.

Signed-off-by: Jan Beulich 
Cc: Greg KH 
Acked-by: Uwe Kleine-König 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

platform-drivers: move probe to .devinit.text in drivers/video

2010-03-08T01:04:50+00:00

A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König 
Cc: Adrian Bunk 
Cc: Alberto Mardegan 
Cc: Andrew Morton 
Cc: Andriy Skulysh 
Cc: Antonino Daplas 
Cc: Anton Vorontsov 
Cc: Ben Dooks 
Cc: Chandramouli Narayanan 
Cc: Christoph Hellwig 
Cc: Frans Pop 
Cc: Geert Uytterhoeven 
Cc: Greg Kroah-Hartman 
Cc: Helge Deller 
Cc: Huang Ying 
Cc: Ian Molton 
Cc: Joshua Kinard 
Cc: Kaj-Michael Lang 
Cc: Krzysztof Helt 
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Maciej W. Rozycki 
Cc: Magnus Damm 
Cc: Martin Michlmayr 
Cc: Matthias Kaehlcke 
Cc: Paul Mundt 
Cc: Pavel Machek 
Cc: Philipp Zabel 
Cc: Richard Purdie 
Cc: Roel Kluin 
Cc: Roland Stigge 
Cc: Russell King 
Cc: Thomas Bogendoerfer 
Cc: Vincent Sanders 
Cc: Yoichi Yuasa 
Acked-by: Ralf Baechle 
Acked-by: Arnaud Patard 
Acked-by: James Simmons 
Acked-by: Peter Jones 
Acked-by: Jaya Kumar 
Signed-off-by: Greg Kroah-Hartman

fbdev: add support for handoff from firmware to hw framebuffers

2009-06-17T02:48:00+00:00

With KMS we have ran into an issue where we really want the KMS fb driver
to be the one running the console, so panics etc can be shown by switching
out of X etc.

However with vesafb/efifb built-in, we end up with those on fb0 and the
KMS fb driver on fb1, driving the same piece of hw, so this adds an fb
info flag to denote a firmware fbdev, and adds a new aperture base/size
range which can be compared when the hw drivers are installed to see if
there is a conflict with a firmware driver, and if there is the firmware
driver is unregistered and the hw driver takes over.

It uses new aperture_base/size members instead of comparing on the fix
smem_start/length, as smem_start/length might for example only cover the
first 1MB of the PCI aperture, and we could allocate the kms fb from 8MB
into the aperture, thus they would never overlap.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Airlie 
Acked-by: Peter Jones 
Cc: Geert Uytterhoeven 
Cc: Krzysztof Helt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vesafb: bitwise OR has higher precedence than ?:

2009-04-01T15:59:32+00:00

Signed-off-by: Roel Kluin 
Acked-by: Michal Januszewski 
Cc: Krzysztof Helt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] annotate some variables in vesafb driver as __read_mostly

2006-12-08T16:29:06+00:00

- annotate some variables in vesafb driver as __read_mostly

Signed-off-by: Helge Deller 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ioremap balanced with iounmap for drivers/video/vesafb

2006-12-08T16:29:04+00:00

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad 
Cc: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] vt: Remove VT-specific declarations and definitions from tty.h

2006-07-10T20:24:16+00:00

MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a
function of the VT layer than the TTY one.  Moving these to vt.h and vt_kern.h
allows all of the framebuffer and VT console drivers to remove their
dependency on tty.h.

[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds