linux-toradex.git/drivers/video, branch v2.6.16.42

nvidiafb: fix unreachable code in nv10GetConfig

2006-11-29T11:17:37+00:00

Fix binary/logical operator typo which leads to unreachable code.  Noticed
while looking at other issues; I don't have the relevant hardware to test
this.

Signed-off-by: Nathan Lynch 
Signed-off-by: Adrian Bunk

Fix divide by zero error for nvidia 7600 pci-express card

2006-11-29T11:15:49+00:00

The following patch resolves the divide by zero error I encountered on my
system:

        http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2

I accomplished this by merging what I thought was appropriate from:

        http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/

Signed-off-by: Adrian Bunk

nvidia fbdev: fix powerpc xmon scribbles

2006-11-10T23:28:30+00:00

xmon writes garbage on the screen because the nvidia console driver has
changed the line pitch from what the firmware set it to.  Fix it by making
the nvidia driver inform the btext engine (which xmon uses if the screen is
its output device) about changes to display resolution.

Signed-off-by: Paul Mackerras 
Signed-off-by: Adrian Bunk

drivers/video/nvidia/nvidia.c: Add ID for Quadro NVS280

2006-11-09T11:00:26+00:00

Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem I
10de:0215.

Signed-off-by: Pavel Roskin 
Signed-off-by: Antonino Daplas 
Signed-off-by: Adrian Bunk

nvidiafb: Add support for Geforce 6100 and related chipsets

2006-11-08T08:08:58+00:00

Add support for Geforce 6100 and related chipsets (PCI device id 0x024x)

Signed-off-by: Antonino Daplas 
Signed-off-by: Adrian Bunk

fbdev: correct buffer size limit in fbmem_read_proc()

2006-11-08T06:48:45+00:00

Address http://bugzilla.kernel.org/show_bug.cgi?id=7189

It should check `clen', not `len'.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Adrian Bunk

fbdev: add modeline for 1680x1050@60

2006-10-13T16:16:26+00:00

Add a modeline for the Philips 200W display.  aty128fb does not do DDC, it
picks 1920x1440 or similar.  It works ok with nvidiafb because it can ask
for DDC data.

mode "1680x1050-60"
    # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz
    geometry 1680 1050 1680 1050 16
    timings 6848 280 104 30 3 176 6
    hsync high
    vsync high
    rgba 5/11,6/5,5/0,0/0
endmode

hwinfo --monitor
20: None 00.0: 10000 Monitor
[Created at monitor.206]
  Unique ID: rdCR.pzUFTofo1S4
  Parent ID: 002j.bJRsY88eNSC
  Hardware Class: monitor
  Model: "PHILIPS Philips 200W"
  Vendor: PHL "PHILIPS"
  Device: eisa 0x0832 "Philips 200W"
  Serial ID: "VN  016596"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@67Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@56Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 832x624@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1152x864@70Hz
  Resolution: 1152x864@75Hz
  Resolution: 1280x960@60Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1680x1050@60Hz
  Size: 433x271 mm
  Driver Info #0:
    Max. Resolution: 1680x1050
    Vert. Sync Range: 56-85 Hz
    Hor. Sync Range: 30-93 kHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #5 (VGA compatible controller)

Signed-off-by: Olaf Hering 
Signed-off-by: Adrian Bunk

[PATCH] fbdev: Fix return error of fb_write

2006-04-24T16:56:05+00:00

Fix return code of fb_write():

If at least 1 byte was transferred to the device, return number of bytes,
otherwise:

    - return -EFBIG - if file offset is past the maximum allowable offset or
      size is greater than framebuffer length
    - return -ENOSPC - if size is greater than framebuffer length - offset

Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

[PATCH] fbcon: Fix big-endian bogosity in slow_imageblit()

2006-04-07T16:44:29+00:00

The monochrome->color expansion routine that handles bitmaps which have
(widths % 8) != 0 (slow_imageblit) produces corrupt characters in big-endian.
This is caused by a bogus bit test in slow_imageblit().

Fix.

Signed-off-by: Antonino Daplas 
Acked-by: Herbert Poetzl 
Signed-off-by: Greg Kroah-Hartman

[PATCH] i810fb_cursor(): use GFP_ATOMIC

2006-03-28T06:47:30+00:00

The console cursor can be called in atomic context.  Change memory
allocation to use the GFP_ATOMIC flag in i810fb_cursor().

Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Chris Wright 
Signed-off-by: Greg Kroah-Hartman