linux-toradex.git/drivers/virtio, branch v6.3-rc3

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2023-02-25T19:48:02+00:00

Pull virtio updates from Michael Tsirkin:

 - device feature provisioning in ifcvf, mlx5

 - new SolidNET driver

 - support for zoned block device in virtio blk

 - numa support in virtio pmem

 - VIRTIO_F_RING_RESET support in vhost-net

 - more debugfs entries in mlx5

 - resume support in vdpa

 - completion batching in virtio blk

 - cleanup of dma api use in vdpa

 - now simulating more features in vdpa-sim

 - documentation, features, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
  vdpa/mlx5: support device features provisioning
  vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
  vdpa: validate device feature provisioning against supported class
  vdpa: validate provisioned device features against specified attribute
  vdpa: conditionally read STATUS in config space
  vdpa: fix improper error message when adding vdpa dev
  vdpa/mlx5: Initialize CVQ iotlb spinlock
  vdpa/mlx5: Don't clear mr struct on destroy MR
  vdpa/mlx5: Directly assign memory key
  tools/virtio: enable to build with retpoline
  vringh: fix a typo in comments for vringh_kiov
  vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
  scsi: virtio_scsi: fix handling of kmalloc failure
  vdpa: Fix a couple of spelling mistakes in some messages
  vhost-net: support VIRTIO_F_RING_RESET
  vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
  vdpa: mlx5: support per virtqueue dma device
  vdpa: set dma mask for vDPA device
  virtio-vdpa: support per vq dma device
  vdpa: introduce get_vq_dma_device()
  ...

virtio-vdpa: support per vq dma device

2023-02-21T00:26:58+00:00

This patch adds the support of per vq dma device for virito-vDPA. vDPA
parents then are allowed to use different DMA devices. This is useful
for the parents that have software or emulated virtqueues.

Reviewed-by: Eli Cohen 
Tested-by: Eli Cohen 
Signed-off-by: Jason Wang 
Message-Id: <20230119061525.75068-4-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin

virtio_ring: per virtqueue dma device

2023-02-21T00:26:58+00:00

This patch introduces a per virtqueue dma device. This will be used
for virtio devices whose virtqueue are backed by different underlayer
devices.

One example is the vDPA that where the control virtqueue could be
implemented through software mediation.

Some of the work are actually done before since the helper like
vring_dma_device(). This work left are:

- Let vring_dma_device() return the per virtqueue dma device instead
  of the vdev's parent.
- Allow passing a dma_device when creating the virtqueue through a new
  helper, old vring creation helper will keep using vdev's parent.

Reviewed-by: Eli Cohen 
Tested-by: Eli Cohen 
Signed-off-by: Jason Wang 
Message-Id: <20230119061525.75068-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin

driver core: make struct bus_type.uevent() take a const *

2023-01-27T12:45:52+00:00

The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.

Acked-by: Rafael J. Wysocki 
Acked-by: Hans de Goede 
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

virtio: Implementing attribute show with sysfs_emit

2022-12-28T10:28:11+00:00

Replace sprintf with sysfs_emit or its variants for their
built-in PAGE_SIZE awareness.

Signed-off-by: Dawei Li 
Message-Id: 
Signed-off-by: Michael S. Tsirkin

virtio_pci: modify ENOENT to EINVAL

2022-12-28T10:28:09+00:00

Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.

Signed-off-by: Angus Chen 
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin

virtio_ring: use helper function is_power_of_2()

2022-12-28T10:28:09+00:00

Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.

Signed-off-by: Shaoqin Huang 
Message-Id: <20221021062734.228881-3-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Xuan Zhuo

virtio_pci: use helper function is_power_of_2()

2022-12-28T10:28:09+00:00

Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.

Signed-off-by: Shaoqin Huang 
Message-Id: <20221021062734.228881-2-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Philippe Mathieu-Daudé 
Reviewed-by: Xuan Zhuo

virtio_pci: use irq to detect interrupt support

2022-10-13T13:33:03+00:00

commit 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.

vp_find_vqs() bails out because pci_dev->pin == 0.

But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.

This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.

However Linus said:
	I really think that that is basically the only time you should use
	that 'pci_dev->pin' thing: it basically exists not for "does this
	device have an IRQ", but for "what is the routing of this irq on this
	device".

and
	The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
		if (dev->irq) ...

so let's just check irq and be done with it.

Suggested-by: Linus Torvalds 
Reported-by: Michael Ellerman 
Fixes: 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero")
Cc: "Angus Chen" 
Signed-off-by: Michael S. Tsirkin 
Tested-by: Michael Ellerman 
Acked-by: Jason Wang 
Message-Id: <20221012220312.308522-1-mst@redhat.com>

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2022-10-11T00:53:04+00:00

Pull MM updates from Andrew Morton:

- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).

- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.

Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.

Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.

- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.

KMSAN keeps finding bugs. New ones, as well as the legacy ones.

- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.

- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.

- userfaultfd updates from Axel Rasmussen

- zsmalloc cleanups from Alexey Romanov

- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure

- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.

- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.

- memcg cleanups from Kairui Song.

- memcg fixes and cleanups from Johannes Weiner.

- Vishal Moola provides more folio conversions

- Zhang Yi removed ll_rw_block() :(

- migration enhancements from Peter Xu

- migration error-path bugfixes from Huang Ying

- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.

- vma merging improvements from Jakub Matěn.

- NUMA hinting cleanups from David Hildenbrand.

- xu xin added aditional userspace visibility into KSM merging
activity.

- THP & KSM code consolidation from Qi Zheng.

- more folio work from Matthew Wilcox.

- KASAN updates from Andrey Konovalov.

- DAMON cleanups from Kaixu Xia.

- DAMON work from SeongJae Park: fixes, cleanups.

- hugetlb sysfs cleanups from Muchun Song.

- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...