linux-toradex.git/drivers/w1, branch v5.0

treewide: surround Kconfig file paths with double quotes

2018-12-21T15:25:54+00:00

The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.

I do not see a good reason to complicate Kconfig for the room of
ambiguity.

The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.

Make it treewide consistent now.

Signed-off-by: Masahiro Yamada 
Acked-by: Wolfram Sang 
Acked-by: Geert Uytterhoeven 
Acked-by: Ingo Molnar

w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).

2018-10-15T18:50:32+00:00

IAD Register is yet readable trough the "iad" sys file.

A write to the "iad" sys file enables or disables the current
measurement, but it was not possible to get the measured value by
reading it.
Fix: %u in snprintf for unsigned values (vdd and vad)
Fix: Avoid possibles overflows (Usage of the 'count' variables)

Signed-off-by: Julien Folly 
Acked-by: Evgeniy Polyakov 
Signed-off-by: Greg Kroah-Hartman

w1: omap-hdq: fix missing bus unregister at removal

2018-10-02T22:36:10+00:00

The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this

[  127.842987] Unable to handle kernel paging request at virtual address bf01d04c
[  127.850646] pgd = 70e3cd9a
[  127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000
[  127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[  127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[  127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[  127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[  127.890441] PC is at 0xbf01d04c
[  127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[  127.898956] pc : []    lr : []    psr: a0070013
[  127.905609] sp : cf885f48  ip : bf01d04c  fp : ddf1e11c
[  127.911132] r10: cf8fe040  r9 : c05f8d00  r8 : cf8fe040
[  127.916656] r7 : 000000f0  r6 : cf8fe02c  r5 : cf8fe000  r4 : cf8fe01c
[  127.923553] r3 : c05f8d00  r2 : 000000f0  r1 : cf8fe000  r0 : dde1ef10
[  127.930450] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  127.938018] Control: 10c5387d  Table: 8f8f0019  DAC: 00000051
[  127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[  127.951171] Stack: (0xcf885f48 to 0xcf886000)
[  127.955810] 5f40:                   cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[  127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[  127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[  127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[  127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[  128.007781] [] (w1_search_process_cb) from [] (w1_process+0x6c/0x118)
[  128.016479] [] (w1_process) from [] (kthread+0x130/0x148)
[  128.024047] [] (kthread) from [] (ret_from_fork+0x14/0x2c)
[  128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[  128.037017] 5fa0:                                     00000000 00000000 00000000 00000000
[  128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  128.061340] Code: bad PC value
[  128.064697] ---[ end trace af066e33c0e14119 ]---

Cc: 
Signed-off-by: Andreas Kemnade 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2018-08-22T01:06:27+00:00

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2018-08-18T18:04:51+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion

2018-07-11T16:09:09+00:00

This patch removes the w1 slave driver that used to register the w1 family
and instanciate a platform device at runtime. The code now lives in the
supply driver instead to avoid that level of indirection.

The old device name "ds2760-battery.0" is preserved, so userspace
applications can access the same virtual device nodes as before.

Note that because the w1 core does not currently have a framework for
suspend/resume, the driver now registers a PM notifier callback.

Signed-off-by: Daniel Mack 
Signed-off-by: Sebastian Reichel

w1: core: match sub-nodes of bus masters in devicetree

2018-07-11T16:09:08+00:00

Once a new slave device is detected, match it against all sub-nodes of the
master bus controller. If a match is found, set the slave device's of_node
pointer.

Signed-off-by: Daniel Mack 
Signed-off-by: Sebastian Reichel

headers: separate linux/mod_devicetable.h from linux/platform_device.h

2018-07-07T15:52:26+00:00

At over 4000 #includes,  is the 9th most
#included header file in the Linux kernel.  It does not need
, so drop that header and explicitly add
 to source files that need it.

   4146 #include 

After this patch, there are 225 files that use ,
for a reduction of around 3900 times that 
does not have to be read & parsed.

    225 #include 

This patch was build-tested on 20 different arch-es.

It also makes these drivers SubmitChecklist#1 compliant.

Signed-off-by: Randy Dunlap 
Reported-by: kbuild test robot  # drivers/media/platform/vimc/
Reported-by: kbuild test robot  # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman

ds2490.c: Move struct open braces to previous line

2018-07-07T15:27:13+00:00

Move open braces of two structs to the declaration line,
as criticized by checkpatch.

Signed-off-by: Henriette Hofmeier 
Signed-off-by: Florian Harbecke 
Signed-off-by: Greg Kroah-Hartman

ds2490.c: Remove unnecessary whitespace

2018-07-07T15:27:13+00:00

Remove unnecessary whitespace criticized by
checkpatch.

Signed-off-by: Henriette Hofmeier 
Signed-off-by: Florian Harbecke 
Signed-off-by: Greg Kroah-Hartman