linux-toradex.git/drivers/watchdog, branch v3.12.45 Linux kernel for Apalis and Colibri modules watchdog: kempld-wdt: Use the correct value when configuring the prescaler with the watchdog 2014-07-17T11:43:16+00:00 gundberg per.gundberg@icomera.com 2014-04-24T13:49:19+00:00 ec03435f8102baf52e783b72d11359f8d31f3629 commit a9e0436b303e94ba57d3bd4b1fcbeaa744b7ebeb upstream. Use the prescaler index, rather than its value, to configure the watchdog. This will prevent a mismatch with the prescaler used to calculate the cycles. Signed-off-by: Per Gundberg <per.gundberg@icomera.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit a9e0436b303e94ba57d3bd4b1fcbeaa744b7ebeb upstream.

Use the prescaler index, rather than its value, to configure the watchdog.
This will prevent a mismatch with the prescaler used to calculate the cycles.

Signed-off-by: Per Gundberg <per.gundberg@icomera.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Brunner <michael.brunner@kontron.com>
Tested-by: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
watchdog: ath79_wdt: avoid spurious restarts on AR934x 2014-07-17T11:43:16+00:00 Gabor Juhos juhosg@openwrt.org 2014-04-16T09:34:41+00:00 17178d1a8770860f2ea6aa48413b77102e45edf9 commit 23afeb613ec0e10aecfae7838a14d485db62ac52 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 23afeb613ec0e10aecfae7838a14d485db62ac52 upstream.

On some AR934x based systems, where the frequency of
the AHB bus is relatively high, the built-in watchdog
causes a spurious restart when it gets enabled.

The possible cause of these restarts is that the timeout
value written into the TIMER register does not reaches
the hardware in time.

Add an explicit delay into the ath79_wdt_enable function
to avoid the spurious restarts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() 2014-07-17T11:43:16+00:00 Viresh Kumar viresh.kumar@linaro.org 2014-05-15T04:31:59+00:00 3ffceee7c5ae8ccaf1ede159d8e3878be9c5c625 commit 938626d96a3ffb9eb54552bb0d3a4f2b30ffdeb0 upstream. Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 938626d96a3ffb9eb54552bb0d3a4f2b30ffdeb0 upstream.

Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.

Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
sc1200_wdt: Fix oops 2013-12-20T15:49:07+00:00 Alan gnomes@lxorguk.ukuu.org.uk 2013-12-04T15:31:52+00:00 e50aa26054196975ecbccdc65b65fd8f73fdb6e2 commit dace8bbfccfd9e4fcccfffcfbd82881fda3e756f upstream. If loaded with isapnp = 0 the driver explodes. This is catching people out now and then. What should happen in the working case is a complete mystery and the code appears terminally confused, but we can at least make the error path work properly. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dace8bbfccfd9e4fcccfffcfbd82881fda3e756f upstream.

If loaded with isapnp = 0 the driver explodes. This is catching
people out now and then. What should happen in the working case is
a complete mystery and the code appears terminally confused, but we
can at least make the error path work properly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
watchdog: sunxi: Fix section mismatch 2013-10-13T18:02:03+00:00 Maxime Ripard maxime.ripard@free-electrons.com 2013-10-05T14:20:17+00:00 1d5898b4f8a0f6e231546d30dd54f6f9b89c232c This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
This driver has a section mismatch, for probe and remove functions,
leading to the following warning during the compilation.

WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in
reference from the variable sunxi_wdt_driver to the function
.init.text:sunxi_wdt_probe()
The variable sunxi_wdt_driver references
the function __init sunxi_wdt_probe()

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
watchdog: kempld_wdt: Fix bit mask definition 2013-10-13T18:01:57+00:00 Jingoo Han jg1.han@samsung.com 2013-09-23T10:16:57+00:00 4c4e45669de475573b15d968a6dca8d00124c9ad STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)'
handles [9:8] bits. Thus, it should be fixed in order to handle
[5:4] bits.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
watchdog: ts72xx_wdt: locking bug in ioctl 2013-10-13T18:01:50+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-08-23T08:40:59+00:00 8612ed0d97abcf1c016d34755b7cf2060de71963 Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a
interruptible deadlock.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
watchdog: hpwdt: Patch to ignore auxilary iLO devices 2013-10-10T20:23:10+00:00 Mingarelli, Thomas Thomas.Mingarelli@hp.com 2013-08-09T16:31:09+00:00 0821f20d49d19f49e53b05ef6727e010c4b1f11d This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Tested-by: Lisa Mitchell <lisa.mitchell@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
This patch is to prevent hpwdt from loading on any auxilary iLO devices defined
after the initial (or main) iLO device. All auxilary iLO devices will have a
subsystem device ID set to 0x1979 in order for hpwdt to differentiate between
the two types.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Lisa Mitchell <lisa.mitchell@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Merge git://www.linux-watchdog.org/linux-watchdog 2013-09-12T15:45:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-09-12T15:45:53+00:00 24ba40588fe50adce2a99e026fc0026872ebeb85 Pull watchdog updates from Wim Van Sebroeck: - New watchdog driver for Allwinner A10/A13 - some devm_ioremap_resource simplifications - a s3c2410_wdt change that removes the global variables * git://www.linux-watchdog.org/linux-watchdog: watchdog: s3c2410_wdt: simplify use of devm_ioremap_resource watchdog: simplify platform_get_resource_byname/devm_ioremap_resource watchdog: ts72xx_wdt: simplify use of devm_ioremap_resource watchdog: nuc900_wdt.c: simplify use of devm_ioremap_resource watchdog: sunxi: New watchdog driver for Allwinner A10/A13 watchdog: s3c2410_wdt: remove the global variables 
Pull watchdog updates from Wim Van Sebroeck:
 - New watchdog driver for Allwinner A10/A13
 - some devm_ioremap_resource simplifications
 - a s3c2410_wdt change that removes the global variables

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: s3c2410_wdt: simplify use of devm_ioremap_resource
  watchdog: simplify platform_get_resource_byname/devm_ioremap_resource
  watchdog: ts72xx_wdt: simplify use of devm_ioremap_resource
  watchdog: nuc900_wdt.c: simplify use of devm_ioremap_resource
  watchdog: sunxi: New watchdog driver for Allwinner A10/A13
  watchdog: s3c2410_wdt: remove the global variables
lto, watchdog/hpwdt.c: make assembler label global 2013-09-11T22:58:21+00:00 Andi Kleen ak@linux.intel.com 2013-09-11T21:23:20+00:00 a6b088875b5cfc2be95242826f31523214c083a7 We cannot assume that the inline assembler code always ends up in the same file as the original C file. So make any assembler labels that are called with "extern" by C global Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
We cannot assume that the inline assembler code always ends up in the same
file as the original C file.  So make any assembler labels that are called
with "extern" by C global

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>