Most WDT driver modules return ENODEV during modprobe if no valid device was found, but w83697hf_wdt returns EIO. Let w83697hf_wdt return ENODEV. Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `dw_wdt_drv_probe': drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
If the watchdog has already triggered for whatever reason, it won't restart unless the trigger is reset. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Major difference is that the watchdog control and counter registers are different on both chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Instead of requiring the user to provide an IO address per module parameter, auto-detect it as well as supported chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Try to reset the watchdog counter 4 or 2 times more often than actually requested, to avoid spurious watchdog reset. If this is not possible because of the min_heartbeat value, reset it at the min_heartbeat period. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Use the min_heartbeat value instead of the calculated heartbeat value for the first watchdog reset to avoid spurious watchdog reset. Resetting the watchdog counter during init might lead to a watchdog fault reset because the watchdog counter has to be running for at least min_heartbeat. Resetting the watchdog counter after heartbeat might lead to a watchdog timeout reset because the watchdog counter is running for more than max_heartbeat time. Using min_heartbeat instead of heartbeat does not guarantee that the watchdog won't trigger a reset, but at least it reduces the chances to be in such a case. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Fix the secs_to_ticks macro in case 0 is passed as an argument. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The at91sam9 watchdog timer can only be configured once, and the current implementation tries to configure it in a static way: - 2 seconds timeout - wdt restart every 500ms If the timer has already been configured with different values, it returns an error and do not create any watchdog device. This is not critical if the watchdog is disabled, but if it has been enabled with different timeout values it will lead to a SoC reset. This patch series tries to address this issue by adapting the heartbeat value according the WDT timer config: - it first tries to configure the timer as requested. - if it fails it fallbacks to the current config, adapting its heartbeat timer to the needs This patch series also move to a dynamically allocated at91wdt device instead of the static instance. It adds a new at91 wdt type: software. This new type make use of the at91 wdt interrupt to trigger a software reboot. Finally it adds several properties to the device tree bindings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add sp805_wdt depends on ARM64. Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>