linux-toradex.git/drivers/watchdog, branch v4.9.100

watchdog: f71808e_wdt: Fix WD_EN register read

2018-04-24T07:34:14+00:00

commit 977f6f68331f94bb72ad84ee96b7b87ce737d89d upstream.

F71808FG_FLAG_WD_EN defines bit position, not a bitmask

Signed-off-by: Igor Pylypiv 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

watchdog: f71808e_wdt: Add F71868 support

2018-04-13T17:48:20+00:00

[ Upstream commit 166fbcf88fdafa02f784ec25ac64745c716b2de0 ]

This adds support for watchdog part of Fintek F71868 Super I/O chip to
f71808e_wdt driver.

The F71868 chip is, in general, very similar to a F71869, however it has
slightly different set of available reset pulse widths.

Tested on MSI A55M-P33 motherboard.

Signed-off-by: Maciej S. Szmigiero 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / watchdog: Fix off-by-one error at resource assignment

2018-03-28T16:39:22+00:00

commit b1abf6fc49829d89660c961fafe3f90f3d843c55 upstream.

The resource allocation in WDAT watchdog has off-one-by error, it sets
one byte more than the actual end address.  This may eventually lead
to unexpected resource conflicts.

Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Cc: 4.9+  # 4.9+
Signed-off-by: Takashi Iwai 
Acked-by: Mika Westerberg 
Acked-by: Guenter Roeck 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

watchdog: Fix potential kref imbalance when opening watchdog

2018-03-24T10:00:24+00:00

[ Upstream commit 4bcd615fad6adddc68b058d498b30a9e0e0db77a ]

If a watchdog driver's open function sets WDOG_HW_RUNNING with the
expectation that the watchdog can not be stopped, but then stops the
watchdog anyway in its stop function, kref_get() wil not be called in
watchdog_open(). If the watchdog then stops on close, WDOG_HW_RUNNING
will be cleared and kref_put() will be called, causing a kref imbalance.
As result the character device data structure will be released, which in
turn will cause the system to crash on the next call to watchdog_open().

Fixes: ee142889e32f5 ("watchdog: Introduce WDOG_HW_RUNNING flag")
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: Remove legacy NMI sourcing.

2018-03-18T10:18:53+00:00

commit 2b3d89b402b085b08498e896c65267a145bed486 upstream.

Gen8 and prior Proliant systems supported the "CRU" interface
to firmware.  This interfaces allows linux to "call back" into firmware
to source the cause of an NMI.  This feature isn't fully utilized
as the actual source of the NMI isn't printed, the driver only
indicates that the source couldn't be determined when the call
fails.

With the advent of Gen9, iCRU replaces the CRU. The call back
feature is no longer available in firmware.  To be compatible and
not attempt to call back into firmware on system not supporting CRU,
the SMBIOS table is consulted to determine if it is safe to
make the call back or not.

This results in about half of the driver code being devoted
to either making CRU calls or determing if it is safe to make
CRU calls.  As noted, the driver isn't really using the results of
the CRU calls.

Furthermore, as a consequence of the Spectre security issue, the
BIOS/EFI calls are being wrapped into Spectre-disabling section.
Removing the call back in hpwdt_pretimeout assists in this effort.

As the CRU sourcing of the NMI isn't required for handling the
NMI and there are security concerns with making the call back, remove
the legacy (pre Gen9) NMI sourcing and the DMI code to determine if
the system had the CRU interface.

Signed-off-by: Jerry Hoemann 
Acked-by: Ingo Molnar 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: fix unused variable warning

2018-03-18T10:18:52+00:00

commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream.

The new hpwdt_my_nmi() function is used conditionally, which produces
a harmless warning in some configurations:

drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function]

This moves it inside of the #ifdef that protects its caller, to silence
the warning.

Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: Check source of NMI

2018-03-18T10:18:52+00:00

commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream.

Do not claim the NMI (i.e. return NMI_DONE) if the source of
the NMI isn't the iLO watchdog or debug.

Signed-off-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: SMBIOS check

2018-03-18T10:18:52+00:00

commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream.

This corrects:
commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits")

The test on HPE SMBIOS extension type 219 record "Misc Features"
bits for UEFI support is incorrect.  The definition of the Misc Features
bits in the HPE SMBIOS OEM Extensions specification (and related
firmware) was changed to use a different pair of bits to
represent UEFI supported.  Howerver, a corresponding change
to Linux was missed.

Current code/platform work because the iCRU test is working.
But purpose of cce78da766 is to ensure correct functionality
on future systems where iCRU isn't supported.

Signed-off-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: imx2_wdt: restore previous timeout after suspend+resume

2018-02-17T12:21:17+00:00

commit 0be267255cef64e1c58475baa7b25568355a3816 upstream.

When the watchdog device is suspended, its timeout is set to the maximum
value. During resume, the previously set timeout should be restored.
This does not work at the moment.

The suspend function calls

imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);

and resume reverts this by calling

imx2_wdt_set_timeout(wdog, wdog->timeout);

However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore,
wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume
function.

Fix this by adding a new function __imx2_wdt_set_timeout() which
only updates the hardware settings. imx2_wdt_set_timeout() now calls
__imx2_wdt_set_timeout() and then saves the new timeout to
wdog->timeout.

During suspend, we call __imx2_wdt_set_timeout() directly so that
wdog->timeout won't be updated and we can restore the previous value
during resume. This approach makes wdog->timeout different from the
actual setting in the hardware which is usually not a good thing.
However, the two differ only while we're suspended and no kernel code is
running, so it should be ok in this case.

Signed-off-by: Martin Kaiser 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: kempld: fix gcc-4.3 build

2017-10-21T15:21:33+00:00

[ Upstream commit 3736d4eb6af37492aeded7fec0072dedd959c842 ]

gcc-4.3 can't decide whether the constant value in
kempld_prescaler[PRESCALER_21] is built-time constant or
not, and gets confused by the logic in do_div():

drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout':
kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod'

This adds a call to ACCESS_ONCE() to force it to not consider
it to be constant, and leaves the more efficient normal case
in place for modern compilers, using an #ifdef to annotate
why we do this hack.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman