linux-toradex.git/drivers, branch v2.6.16.40-rc1

[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator

2007-02-03T01:32:59+00:00

We are inside spin_lock_irqsave().  quoth akpm's debug facility:

 [  231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
 [  232.232000] ata1.00: configured for UDMA/33
 [  232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic()
 [  232.404000]  [] kmap_atomic+0xa9/0x1ab
 [  232.404000]  [] ata_scsi_rbuf_get+0x1c/0x30
 [  232.404000]  [] ata_scsi_rbuf_fill+0x1a/0x87
 [  232.404000]  [] ata_scsiop_mode_sense+0x0/0x309
 [  232.404000]  [] end_bio_bh_io_sync+0x0/0x37
 [  232.404000]  [] scsi_done+0x0/0x16
 [  232.404000]  [] scsi_done+0x0/0x16
 [  232.404000]  [] ata_scsi_simulate+0xb0/0x13f
[...]

Signed-off-by: Jeff Garzik 
Signed-off-by: Adrian Bunk

hwmon: Update Rudolf Marek's e-mail address

2007-02-03T01:04:01+00:00

The Silicon Hill club is not what it used to be.

Signed-off-by: Rudolf Marek 
Signed-off-by: Jean Delvare 
Signed-off-by: Adrian Bunk

k8temp: Documentation update

2007-02-03T01:00:19+00:00

Update the documentation for the k8temp driver.

Signed-off-by: Rudolf Marek 
Signed-off-by: Jean Delvare 
Signed-off-by: Adrian Bunk

Make 'repair' actually work for raid1.

2007-02-03T00:56:23+00:00

When 'repair' finds a block that is different one the various
parts of the mirror. it is meant to write a chosen good version
to the others.  However it currently writes out the original data
to each. The memcpy to make all the data the same is missing.

Also correct a test so that 'repair' causes a repair, rather than
anything other then 'repair'.

Signed-off-by: Neil Brown 
Signed-off-by: Adrian Bunk

hwmon: New driver k8temp

2007-01-30T20:23:01+00:00

Add support for the temperature sensor(s) found in AMD K8 CPUs.

Signed-off-by: Rudolf Marek 
Signed-off-by: Adrian Bunk

[SCSI] arcmsr: fix up sysfs values

2007-01-30T20:23:00+00:00

The sysfs files in arcmsr are non-standard in that they aren't simple
filename value pairs, the values actually contain preceeding text which
would have to be parsed.  The idea of sysfs files is that the file name
is the description and the contents is a simple value.

Fix up arcmsr to conform to this standard.

Signed-off-by: James Bottomley 
Signed-off-by: Adrian Bunk

[SCSI] areca sysfs fix

2007-01-30T20:22:58+00:00

Remove sysfs_remove_bin_file() return-value checking from the areca driver.

There's nothing a driver can do if sysfs file removal fails, so we'll soon be
changing sysfs_remove_bin_file() to internally print a diagnostic and to
return void.

Signed-off-by: Andrew Morton 
Signed-off-by: Adrian Bunk

[SCSI] arcmsr: initial driver, version 1.20.00.13

2007-01-30T20:22:57+00:00

arcmsr is a driver for the Areca Raid controller, a host based RAID
subsystem that speaks SCSI at the firmware level.

This patch is quite a clean up over the initial submission with
contributions from:

Randy Dunlap 
Christoph Hellwig 
Matthew Wilcox 
Adrian Bunk 

Signed-off-by: Erich Chen 
Signed-off-by: Adrian Bunk

V4L/DVB: Missing statement in drivers/media/dvb/frontends/cx22700.c

2007-01-24T23:05:10+00:00

Stumbled over this because of coverity (id #492),
seems like we are missing a return statement here and fail
to do proper bounds checking. If this assumption is false
we should at least change the identation to make it clear

Signed-off-by: Eric Sesterhenn 
Signed-off-by: Adrian Bunk

V4L/DVB: Flexcop-usb: fix debug printk

2007-01-24T18:02:31+00:00

.. fix debug printk. Why, oh why, one would want to do
   (u16 & 0xff) << 8
and print it with %02x format?

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Adrian Bunk