linux-toradex.git/drivers, branch v2.6.16.42

USB: rtl8150 new device id

2007-02-22T20:13:05+00:00

This one adds another vendor ID to rtl8150 driver.

Signed-off-by: Petko Manolov 
Signed-off-by: Adrian Bunk

USB: add ZyXEL vendor/product ID to rtl8150 driver

2007-02-22T20:11:26+00:00

I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150
adapter.  Here is the relevant /proc/bus/usb/devices output (after
adding the vendor/product IDs to the driver):

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0586 ProdID=401a Rev= 1.00
S:  Manufacturer=ZyXEL
S:  Product=Prestige USB Adapter
S:  SerialNumber=1027
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=1ms

This patch adds the ZyXEL vendor ID to the rtl8150.c driver.  The
device has absolutely no identifying marks on the outside for model
type, just a serial number, and I can't find anything on ZyXEL's
website, so I called the product ID PRODUCT_ID_PRESTIGE to match the
product string.

Signed-off-by: Dan Streetman 
Signed-off-by: Adrian Bunk

sky2: dual-port pci-x checksum fix

2007-02-22T20:07:51+00:00

Add a workaround for dual port PCI-X card that returns status out of
order sometimes because of split transactions.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Adrian Bunk

sky2: fix for NAPI with dual port boards

2007-02-22T20:07:11+00:00

This driver uses port 0 to handle receives on both ports. So
the netif_poll_disable call in dev_close would end up stopping the
second port on dual port cards.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Adrian Bunk

fix rtl8150

2007-02-21T11:48:22+00:00

That code doesn't do what its author apparently thought it would do...

Signed-off-by: Al Viro 
Signed-off-by: Adrian Bunk

[ATM] ambassador, firestream: "-1 >>" is implementation defined

2007-02-21T00:43:24+00:00

6.5.7(5): The result of E1 >> E2 is E1 right-shifted E2 bit positions.
            ...
    If E1 has a signed type and a negative value, the resulting value
    is implementation defined.

So, cast -1 to unsigned type to make result well-defined.

[ Modified to use ~0U based upon recommendation from Al Viro. -DaveM ]

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Adrian Bunk

[ATM] firestream: handle thrown error

2007-02-21T00:42:39+00:00

gcc emits the following warning:

drivers/atm/firestream.c: In function ‘fs_open’:
drivers/atm/firestream.c:870: warning: ‘tmc0’ may be used uninitialized in this function

This indicates a real bug.  We should check make_rate() return value for
potential errors.

Signed-off-by: Jeff Garzik 
Signed-off-by: Adrian Bunk

[ATM] horizon: read_bia() needs to be __devinit

2007-02-21T00:41:25+00:00

Thanks to Randy Dunlap.

Signed-off-by: David S. Miller 
Signed-off-by: Adrian Bunk

ATM horizon.c: missing __devinit

2007-02-21T00:40:51+00:00

Signed-off-by: Al Viro 
Signed-off-by: Adrian Bunk

V4L/DVB: Buf_qbuf: fix: videobuf_queue->stream corruption and lockup

2007-02-20T15:07:19+00:00

We are doing ->buf_prepare(buf) before adding buf to q->stream list. This
means that videobuf_qbuf() should not try to re-add a STATE_PREPARED buffer.

Adrian Bunk:
Backported to 2.6.16.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Mauro Carvalho Chehab