linux-toradex.git/drivers, branch v3.2.29

asus-nb-wmi: add some video toggle keys

2012-09-12T02:37:36+00:00

commit 3766054fff4af1b58a1440a284907887f4d2e8be upstream.

There are some new video switch keys that used by newer machines.
0xA0 - SDSP HDMI only
0xA1 - SDSP LCD + HDMI
0xA2 - SDSP CRT + HDMI
0xA3 - SDSP TV + HDMI
But in Linux, there is no suitable userspace application to handle this,
so, mapping them all to KEY_SWITCHVIDEOMODE.

Signed-off-by: AceLan Kao 
Signed-off-by: Matthew Garrett 
Signed-off-by: Ben Hutchings

Staging: speakup: fix an improperly-declared variable.

2012-09-12T02:37:35+00:00

commit 4ea418b8b2fa8a70d0fcc8231b65e67b3a72984b upstream.

A local static variable was declared as a pointer to a string
constant.  We're assigning to the underlying memory, so it
needs to be an array instead.

Signed-off-by: Christopher Brannon 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

pmac_zilog,kdb: Fix console poll hook to return instead of loop

2012-09-12T02:37:34+00:00

commit 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 upstream.

kdb <-> kgdb transitioning does not work properly with this UART
driver because the get character routine loops indefinitely as opposed
to returning NO_POLL_CHAR per the expectation of the KDB I/O driver
API.

The symptom is a kernel hang when trying to switch debug modes.

Cc: Alan Cox 
Signed-off-by: Jason Wessel 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

HID: add support for Cypress barcode scanner 04B4:ED81

2012-09-12T02:37:34+00:00

commit 76c9d8fe2c7fc34ffc387d8022c5828d6ff9df48 upstream.

Add yet another device to the list of Cypress barcode scanners
needing the CP_RDESC_SWAPPED_MIN_MAX quirk.

Signed-off-by: Lionel Vaux (iouri) 
Signed-off-by: Jiri Kosina 
Signed-off-by: Ben Hutchings

virtio-blk: Reset device after blk_cleanup_queue()

2012-09-12T02:37:33+00:00

commit 483001c765af6892b3fc3726576cb42f17d1d6b5 upstream.

blk_cleanup_queue() will call blk_drian_queue() to drain all the
requests before queue DEAD marking. If we reset the device before
blk_cleanup_queue() the drain would fail.

1) if the queue is stopped in do_virtblk_request() because device is
full, the q->request_fn() will not be called.

blk_drain_queue() {
   while(true) {
      ...
      if (!list_empty(&q->queue_head))
        __blk_run_queue(q) {
	    if (queue is not stoped)
		q->request_fn()
	}
      ...
   }
}

Do no reset the device before blk_cleanup_queue() gives the chance to
start the queue in interrupt handler blk_done().

2) In commit b79d866c8b7014a51f611a64c40546109beaf24a, We abort requests
dispatched to driver before blk_cleanup_queue(). There is a race if
requests are dispatched to driver after the abort and before the queue
DEAD mark. To fix this, instead of aborting the requests explicitly, we
can just reset the device after after blk_cleanup_queue so that the
device can complete all the requests before queue DEAD marking in the
drain process.

Cc: Rusty Russell 
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Rusty Russell 
Signed-off-by: Ben Hutchings

virtio-blk: Call del_gendisk() before disable guest kick

2012-09-12T02:37:33+00:00

commit 02e2b124943648fba0a2ccee5c3656a5653e0151 upstream.

del_gendisk() might not return due to failing to remove the
/sys/block/vda/serial sysfs entry when another thread (udev) is
trying to read it.

virtblk_remove()
  vdev->config->reset() : guest will not kick us through interrupt
    del_gendisk()
      device_del()
        kobject_del(): got stuck, sysfs entry ref count non zero

sysfs_open_file(): user space process read /sys/block/vda/serial
   sysfs_get_active() : got sysfs entry ref count
      dev_attr_show()
        virtblk_serial_show()
           blk_execute_rq() : got stuck, interrupt is disabled
                              request cannot be finished

This patch fixes it by calling del_gendisk() before we disable guest's
interrupt so that the request sent in virtblk_serial_show() will be
finished and del_gendisk() will success.

This fixes another race in hot-unplug process.

It is save to call del_gendisk(vblk->disk) before
flush_work(&vblk->config_work) which might access vblk->disk, because
vblk->disk is not freed until put_disk(vblk->disk).

Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Rusty Russell 
Signed-off-by: Ben Hutchings

virtio-blk: Fix hot-unplug race in remove method

2012-09-12T02:37:32+00:00

commit b79d866c8b7014a51f611a64c40546109beaf24a upstream.

If we reset the virtio-blk device before the requests already dispatched
to the virtio-blk driver from the block layer are finised, we will stuck
in blk_cleanup_queue() and the remove will fail.

blk_cleanup_queue() calls blk_drain_queue() to drain all requests queued
before DEAD marking. However it will never success if the device is
already stopped. We'll have q->in_flight[] > 0, so the drain will not
finish.

How to reproduce the race:
1. hot-plug a virtio-blk device
2. keep reading/writing the device in guest
3. hot-unplug while the device is busy serving I/O

Test:
~1000 rounds of hot-plug/hot-unplug test passed with this patch.

Changes in v3:
- Drop blk_abort_queue and blk_abort_request
- Use __blk_end_request_all to complete request dispatched to driver

Changes in v2:
- Drop req_in_flight
- Use virtqueue_detach_unused_buf to get request dispatched to driver

Signed-off-by: Asias He 
Signed-off-by: Rusty Russell 
Signed-off-by: Ben Hutchings

virtio_blk: Drop unused request tracking list

2012-09-12T02:37:31+00:00

commit f65ca1dc6a8c81c6bd72297d4399ec5f4c1f3a01 upstream.

Benchmark shows small performance improvement on fusion io device.

Before:
  seq-read : io=1,024MB, bw=19,982KB/s, iops=39,964, runt= 52475msec
  seq-write: io=1,024MB, bw=20,321KB/s, iops=40,641, runt= 51601msec
  rnd-read : io=1,024MB, bw=15,404KB/s, iops=30,808, runt= 68070msec
  rnd-write: io=1,024MB, bw=14,776KB/s, iops=29,552, runt= 70963msec

After:
  seq-read : io=1,024MB, bw=20,343KB/s, iops=40,685, runt= 51546msec
  seq-write: io=1,024MB, bw=20,803KB/s, iops=41,606, runt= 50404msec
  rnd-read : io=1,024MB, bw=16,221KB/s, iops=32,442, runt= 64642msec
  rnd-write: io=1,024MB, bw=15,199KB/s, iops=30,397, runt= 68991msec

Signed-off-by: Asias He 
Signed-off-by: Rusty Russell 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

virtio_blk: fix config handler race

2012-09-12T02:37:31+00:00

commit 4678d6f970c2f7c0cbfefc0cc666432d153b321b upstream.

Fix a theoretical race related to config work
handler: a config interrupt might happen
after we flush config work but before we
reset the device. It will then cause the
config work to run during or after reset.

Two problems with this:
- if this runs after device is gone we will get use after free
- access of config while reset is in progress is racy
(as layout is changing).

As a solution
1. flush after reset when we know there will be no more interrupts
2. add a flag to disable config access before reset

Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Rusty Russell 
Signed-off-by: Ben Hutchings

dmi: Feed DMI table to /dev/random driver

2012-09-12T02:37:30+00:00

commit d114a33387472555188f142ed8e98acdb8181c6d upstream.

Send the entire DMI (SMBIOS) table to the /dev/random driver to
help seed its pools.

Signed-off-by: Tony Luck 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Ben Hutchings