linux-toradex.git/drivers, branch v3.2.54

mmc: block: fix a bug of error handling in MMC driver

2014-01-03T04:33:36+00:00

commit c8760069627ad3b0dbbea170f0c4c58b16e18d3d upstream.

Current MMC driver doesn't handle generic error (bit19 of device
status) in write sequence. As a result, write data gets lost when
generic error occurs. For example, a generic error when updating a
filesystem management information causes a loss of write data and
corrupts the filesystem. In the worst case, the system will never
boot.

This patch includes the following functionality:
  1. To enable error checking for the response of CMD12 and CMD13
     in write command sequence
  2. To retry write sequence when a generic error occurs

Messages are added for v2 to show what occurs.

[Backported to 3.4-stable]

Signed-off-by: KOBAYASHI Yoshitake 
Signed-off-by: Chris Ball 
Signed-off-by: Ben Hutchings

aacraid: prevent invalid pointer dereference

2014-01-03T04:33:35+00:00

commit b4789b8e6be3151a955ade74872822f30e8cd914 upstream.

It appears that driver runs into a problem here if fibsize is too small
because we allocate user_srbcmd with fibsize size only but later we
access it until user_srbcmd->sg.count to copy it over to srbcmd.

It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this
structure already includes one sg element and this is not needed for
commands without data.  So, we would recommend to add the following
(instead of test for fibsize == 0).

Signed-off-by: Mahesh Rajashekhara 
Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

libertas: potential oops in debugfs

2014-01-03T04:33:35+00:00

commit a497e47d4aec37aaf8f13509f3ef3d1f6a717d88 upstream.

If we do a zero size allocation then it will oops.  Also we can't be
sure the user passes us a NUL terminated string so I've added a
terminator.

This code can only be triggered by root.

Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: Dan Carpenter 
Acked-by: Dan Williams 
Signed-off-by: John W. Linville 
Signed-off-by: Ben Hutchings

HID: multitouch: validate indexes details

2014-01-03T04:33:34+00:00

commit 8821f5dc187bdf16cfb32ef5aa8c3035273fa79a upstream.

When working on report indexes, always validate that they are in bounds.
Without this, a HID device could report a malicious feature report that
could trick the driver into a heap overflow:

[  634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500
...
[  676.469629] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

Note that we need to change the indexes from s8 to s16 as they can
be between -1 and 255.

CVE-2013-2897

Signed-off-by: Benjamin Tissoires 
Acked-by: Kees Cook 
Signed-off-by: Jiri Kosina 
[bwh: Backported to 3.2: mt_device::{cc,cc_value,inputmode}_index do not
 exist and the corresponding indices do not need to be validated.
 mt_device::maxcontact_report_id does not exist either.  So all we need
 to do is to widen mt_device::inputmode.]
Signed-off-by: Ben Hutchings

atm: idt77252: fix dev refcnt leak

2014-01-03T04:33:33+00:00

[ Upstream commit b5de4a22f157ca345cdb3575207bf46402414bc1 ]

init_card() calls dev_get_by_name() to get a network deceive. But it
doesn't decrease network device reference count after the device is
used.

Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: rework recvmsg handler msg_name and msg_namelen logic

2014-01-03T04:33:33+00:00

[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller 
Suggested-by: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

connector: improved unaligned access error fix

2014-01-03T04:33:32+00:00

[ Upstream commit 1ca1a4cf59ea343a1a70084fe7cc96f37f3cf5b1 ]

In af3e095a1fb4, Erik Jacobsen fixed one type of unaligned access
bug for ia64 by converting a 64-bit write to use put_unaligned().
Unfortunately, since gcc will convert a short memset() to a series
of appropriately-aligned stores, the problem is now visible again
on tilegx, where the memset that zeros out proc_event is converted
to three 64-bit stores, causing an unaligned access panic.

A better fix for the original problem is to ensure that proc_event
is aligned to 8 bytes here.  We can do that relatively easily by
arranging to start the struct cn_msg aligned to 8 bytes and then
offset by 4 bytes.  Doing so means that the immediately following
proc_event structure is then correctly aligned to 8 bytes.

The result is that the memset() stores are now aligned, and as an
added benefit, we can remove the put_unaligned() calls in the code.

Signed-off-by: Chris Metcalf 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

isdnloop: use strlcpy() instead of strcpy()

2014-01-03T04:33:32+00:00

[ Upstream commit f9a23c84486ed350cce7bb1b2828abd1f6658796 ]

These strings come from a copy_from_user() and there is no way to be
sure they are NUL terminated.

Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

bonding: fix two race conditions in bond_store_updelay/downdelay

2014-01-03T04:33:32+00:00

[ Upstream commit b869ccfab1e324507fa3596e3e1308444fb68227 ]

This patch fixes two race conditions between bond_store_updelay/downdelay
and bond_store_miimon which could lead to division by zero as miimon can
be set to 0 while either updelay/downdelay are being set and thus miss the
zero check in the beginning, the zero div happens because updelay/downdelay
are stored as new_value / bond->params.miimon. Use rtnl to synchronize with
miimon setting.

CC: Jay Vosburgh 
CC: Andy Gospodarek 
CC: Veaceslav Falico 
Signed-off-by: Nikolay Aleksandrov 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

bonding: don't permit to use ARP monitoring in 802.3ad mode

2014-01-03T04:33:32+00:00

[ Upstream commit ec9f1d15db8185f63a2c3143dc1e90ba18541b08 ]

Currently the ARP monitoring is not supported with 802.3ad, and it's
prohibited to use it via the module params.

However we still can set it afterwards via sysfs, cause we only check for
*LB modes there.

To fix this - add a check for 802.3ad mode in bonding_store_arp_interval.

CC: Jay Vosburgh 
CC: Andy Gospodarek 
Signed-off-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings