linux-toradex.git/drivers, branch v4.1.12 Linux kernel for Apalis and Colibri modules sched/preempt, xen: Use need_resched() instead of should_resched() 2015-10-27T00:52:00+00:00 Konstantin Khlebnikov khlebnikov@yandex-team.ru 2015-07-15T09:52:01+00:00 d906a24a7ab60868a191c25e437f92f48948b5ca commit 0fa2f5cb2b0ecd8d56baa51f35f09aab234eb0bf upstream. This code is used only when CONFIG_PREEMPT=n and only in non-atomic context: xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall(). Thus preempt_count is zero and should_resched() is equal to need_resched(). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150715095201.12246.49283.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0fa2f5cb2b0ecd8d56baa51f35f09aab234eb0bf upstream.

This code is used only when CONFIG_PREEMPT=n and only in non-atomic context:
xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall().
Thus preempt_count is zero and should_resched() is equal to need_resched().

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150715095201.12246.49283.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: imx25: ensure that a pin with id i is at position i in the info array 2015-10-27T00:51:59+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2015-09-23T14:35:09+00:00 e44ddb67769172af7ef7d2b37e6a65df56317698 commit 9911a2d5e9d14e39692b751929a92cb5a1d9d0e0 upstream. The code in pinctrl-imx.c only works correctly if in the imx_pinctrl_soc_info passed to imx_pinctrl_probe we have: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i (which conf_reg(pin) being the offset of the pin's configuration register). When the imx25 specific part was introduced in b4a87c9b966f ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") we had: info->pins[i].number = i + 1 conf_reg(info->pins[i]) = 4 * i . Commit 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") tried to fix that but made the situation: info->pins[i-1].number = i conf_reg(info->pins[i-1]) = 4 * i which is hardly better but fixed the error seen back then. So insert another reserved entry in the array to finally yield: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i Fixes: 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9911a2d5e9d14e39692b751929a92cb5a1d9d0e0 upstream.

The code in pinctrl-imx.c only works correctly if in the
imx_pinctrl_soc_info passed to imx_pinctrl_probe we have:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

(which conf_reg(pin) being the offset of the pin's configuration
register).

When the imx25 specific part was introduced in b4a87c9b966f ("pinctrl:
pinctrl-imx: add imx25 pinctrl driver") we had:

	info->pins[i].number = i + 1
	conf_reg(info->pins[i]) = 4 * i

. Commit 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") tried
to fix that but made the situation:

	info->pins[i-1].number = i
	conf_reg(info->pins[i-1]) = 4 * i

which is hardly better but fixed the error seen back then.

So insert another reserved entry in the array to finally yield:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

Fixes: 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rbd: fix double free on rbd_dev->header_name 2015-10-27T00:51:58+00:00 Ilya Dryomov idryomov@gmail.com 2015-08-31T12:21:39+00:00 dd703751ffe7818e43c85f4fea509c2868dce937 commit 3ebe138ac642a195c7f2efdb918f464734421fd6 upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3ebe138ac642a195c7f2efdb918f464734421fd6 upstream.

If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).

rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm thin: fix missing pool reference count decrement in pool_ctr error path 2015-10-27T00:51:57+00:00 Mike Snitzer snitzer@redhat.com 2015-10-13T16:04:28+00:00 015ec5d44756f18dc887fb9b55288cccb1a659ef commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream. Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream.

Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: add pm sysfs files late 2015-10-27T00:51:57+00:00 Alex Deucher alexander.deucher@amd.com 2015-09-30T20:45:52+00:00 4e4887f08f2ece9e7f1975af4c3dc797b1ad557b commit 51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5 upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5 upstream.

They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: attach tile property to mst connector 2015-10-27T00:51:57+00:00 Dave Airlie airlied@redhat.com 2015-10-14T23:04:21+00:00 17c5761b02dc7c815193d1a66a8a51c860e58e4d commit bc8c131ccdd62d4ed4f33c6b50f92907e7c32dee upstream. This allows tiled monitors to work with radeon once mst is enabled. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bc8c131ccdd62d4ed4f33c6b50f92907e7c32dee upstream.

This allows tiled monitors to work with radeon once mst is enabled.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/dp/mst: make mst i2c transfer code more robust. 2015-10-27T00:51:57+00:00 Dave Airlie airlied@gmail.com 2015-10-14T08:51:17+00:00 510035b39ccbbbc0e5d9018796d60c009c3becba commit ae491542cbbbcca0ec8938c37d4079a985e58440 upstream. This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ae491542cbbbcca0ec8938c37d4079a985e58440 upstream.

This zeroes the msg so no random stack data ends up getting
sent, it also limits the function to not accepting > 4
i2c msgs.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/nouveau/fbcon: take runpm reference when userspace has an open fd 2015-10-27T00:51:56+00:00 Ben Skeggs bskeggs@redhat.com 2015-10-02T04:03:19+00:00 db531487d7f87820533fa37be4e52439034075d1 commit f231976c2e8964ceaa9250e57d27c35ff03825c2 upstream. We need to do this in order to prevent accesses to the device while it's powered down. Userspace may have an mmap of the fb, and there's no good way (that I know of) to prevent it from touching the device otherwise. This fixes some nasty races between runpm and plymouth on some systems, which result in the GPU getting very upset and hanging the boot. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f231976c2e8964ceaa9250e57d27c35ff03825c2 upstream.

We need to do this in order to prevent accesses to the device while it's
powered down.  Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.

This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: designware-platdrv: enable RuntimePM before registering to the core 2015-10-27T00:51:56+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2015-10-09T09:39:24+00:00 90e210c2de3e70d92f1b77b707714f0ad5bd4540 commit 36d48fb5766aee9717e429f772046696b215282d upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 36d48fb5766aee9717e429f772046696b215282d upstream.

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 2015-10-27T00:51:56+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2015-09-24T09:06:54+00:00 67e6df4ba36ac3f15a229a7aab69349e6b82cf10 commit 56d4b8a24cef5d66f0d10ac778a520d3c2c68a48 upstream. ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56d4b8a24cef5d66f0d10ac778a520d3c2c68a48 upstream.

ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:

  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: controller timed out

The values received from ACPI are (in fast mode):

  HCNT: 72
  LCNT: 160

this translates to following timings (input clock is 100MHz on Broadwell):

  tHIGH: 720 ns (spec min 600 ns)
  tLOW: 1600 ns (spec min 1300 ns)
  Bus period: 2920 ns (assuming 300 ns tf and tr)
  Bus speed: 342.5 kHz

Both tHIGH and tLOW are within the I2C specification.

The calculated values when ACPI parameters are not used are (in fast mode):

  HCNT: 87
  LCNT: 159

which translates to:

  tHIGH: 870 ns (spec min 600 ns)
  tLOW: 1590 ns (spec min 1300 ns)
  Bus period 3060 ns (assuming 300 ns tf and tr)
  Bus speed 326.8 kHz

These values are also within the I2C specification.

Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).

Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.

Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>