When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for reported issues for 4.13-rc2. Also in here is a new driver, the virtualbox DRM driver. It's stand-alone and got acks from the DRM developers to go in through this tree. It's a new thing, but it should be fine for this point in the rc cycle due to it being independent. All of this has been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: add TL-WN722N v2 support staging: speakup: safely register and unregister ldisc staging: speakup: add functions to register and unregister ldisc staging: speakup: safely close tty staging: sm750fb: avoid conflicting vesafb staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code staging: vboxvideo: Add vboxvideo to drivers/staging staging: sm750fb: fixed a assignment typo staging: rtl8188eu: memory leak in rtw_free_cmd_obj() staging: vchiq_arm: fix error codes in probe staging: comedi: ni_mio_common: fix AO timer off-by-one regression
Pull block fixes from Jens Axboe: "A small set of fixes for -rc2 - two fixes for BFQ, documentation and code, and a removal of an unused variable in nbd. Outside of that, a small collection of fixes from the usual crew on the nvme side" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: don't report 0-bytes in serial number nvmet: preserve controller serial number between reboots nvmet: Move serial number from controller to subsystem nvmet: prefix version configfs file with attr nvme-pci: Fix an error handling path in 'nvme_probe()' nvme-pci: Remove nvme_setup_prps BUG_ON nvme-pci: add another device ID with stripe quirk nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association nvme: fix byte swapping in the streams code nbd: kill unused ret in recv_work bfq: dispatch request to prevent queue stalling after the request completion bfq: fix typos in comments about B-WF2Q+ algorithm
Pull more rdma fixes from Doug Ledford: "As per my previous pull request, there were two drivers that each had a rather large number of legitimate fixes still to be sent. As it turned out, I also missed a reasonably large set of fixes from one person across the stack that are all important fixes. All in all, the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull request. There were some other random fixes that I didn't send in the last pull request that I added to this one. This catches the rdma stack up to the fixes from up to about the beginning of this week. Any more fixes I'll wait and batch up later in the -rc cycle. This will give us a good base to start with for basing a for-next branch on -rc2. Summary: - i40iw fixes - bnxt_re fixes - Dan Carpenter bugfixes across stack - ten more random fixes, no more than two from any one person" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) RDMA/core: Initialize port_num in qp_attr RDMA/uverbs: Fix the check for port number IB/cma: Fix reference count leak when no ipv4 addresses are set RDMA/iser: don't send an rkey if all data is written as immadiate-data rxe: fix broken receive queue draining RDMA/qedr: Prevent memory overrun in verbs' user responses iw_cxgb4: don't use WR keys/addrs for 0 byte reads IB/mlx4: Fix CM REQ retries in paravirt mode IB/rdmavt: Setting of QP timeout can overflow jiffies computation IB/core: Fix sparse warnings RDMA/bnxt_re: Fix the value reported for local ack delay RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq RDMA/bnxt_re: Fix return value of poll routine RDMA/bnxt_re: Enable atomics only if host bios supports RDMA/bnxt_re: Specify RDMA component when allocating stats context RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP RDMA/bnxt_re: Report supported value to IB stack in query_device RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext ...
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix, some displayport mst fixes, and an amdkfd fix. Nothing too crazy, I assume we just haven't see much rc1 testing yet" * tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux: drm/mst: Avoid processing partially received up/down message transactions drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req() drm/mst: Fix error handling during MST sideband message reception drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure drm/imx: fix typo in ipu_plane_formats[] drm/vc4: Fix VBLANK handling in crtc->enable() path dma-buf/fence: Avoid use of uninitialised timestamp drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec drm/radeon: Remove initialization of shared_resources.num_mec drm/amdkfd: Remove unused references to shared_resources.num_mec drm/amdgpu: Fix KFD oversubscription by tracking queues correctly