linux-toradex.git/drivers, branch v4.2.5 Linux kernel for Apalis and Colibri modules pinctrl: imx25: ensure that a pin with id i is at position i in the info array 2015-10-27T00:53:43+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2015-09-23T14:35:09+00:00 ff78a95c11ec3dc9c0bfec8aa37d2c9953b77c25 commit 9911a2d5e9d14e39692b751929a92cb5a1d9d0e0 upstream. The code in pinctrl-imx.c only works correctly if in the imx_pinctrl_soc_info passed to imx_pinctrl_probe we have: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i (which conf_reg(pin) being the offset of the pin's configuration register). When the imx25 specific part was introduced in b4a87c9b966f ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") we had: info->pins[i].number = i + 1 conf_reg(info->pins[i]) = 4 * i . Commit 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") tried to fix that but made the situation: info->pins[i-1].number = i conf_reg(info->pins[i-1]) = 4 * i which is hardly better but fixed the error seen back then. So insert another reserved entry in the array to finally yield: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i Fixes: 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9911a2d5e9d14e39692b751929a92cb5a1d9d0e0 upstream.

The code in pinctrl-imx.c only works correctly if in the
imx_pinctrl_soc_info passed to imx_pinctrl_probe we have:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

(which conf_reg(pin) being the offset of the pin's configuration
register).

When the imx25 specific part was introduced in b4a87c9b966f ("pinctrl:
pinctrl-imx: add imx25 pinctrl driver") we had:

	info->pins[i].number = i + 1
	conf_reg(info->pins[i]) = 4 * i

. Commit 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") tried
to fix that but made the situation:

	info->pins[i-1].number = i
	conf_reg(info->pins[i-1]) = 4 * i

which is hardly better but fixed the error seen back then.

So insert another reserved entry in the array to finally yield:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

Fixes: 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rbd: fix double free on rbd_dev->header_name 2015-10-27T00:53:43+00:00 Ilya Dryomov idryomov@gmail.com 2015-08-31T12:21:39+00:00 0c6eb5c35590b5105e4307c896f1c14e6e1e4915 commit 3ebe138ac642a195c7f2efdb918f464734421fd6 upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3ebe138ac642a195c7f2efdb918f464734421fd6 upstream.

If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).

rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm thin: fix missing pool reference count decrement in pool_ctr error path 2015-10-27T00:53:42+00:00 Mike Snitzer snitzer@redhat.com 2015-10-13T16:04:28+00:00 15c6fd0e468f82b59799ab5e066dcf3e52cc7a36 commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream. Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream.

Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: Keep the pflip interrupts always enabled v7 2015-10-27T00:53:42+00:00 Michel Dänzer michel.daenzer@amd.com 2015-10-08T08:48:04+00:00 62fb74e9f7e25279e72a82571cbac9c7baf37958 commit f6c7aba47bcc0b1cc2085c8d8af80f8c02f28269 upstream. This fixes flickering issues caused by prematurely firing pflip interrupts. v2 (chk): add commit message, fix DCE V10/V11 and DM as well v3: Re-enable pflip interrupt wherever we re-enable a CRTC v4: Enable pflip interrupt in DAL as well v5: drop DAL changes for upstream v6: (agd): only enable interrupts on crtcs that exist v7: (agd): integrate suggestions from Michel Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f6c7aba47bcc0b1cc2085c8d8af80f8c02f28269 upstream.

This fixes flickering issues caused by prematurely firing pflip
interrupts.

v2 (chk): add commit message, fix DCE V10/V11 and DM as well
v3: Re-enable pflip interrupt wherever we re-enable a CRTC
v4: Enable pflip interrupt in DAL as well
v5: drop DAL changes for upstream
v6: (agd): only enable interrupts on crtcs that exist
v7: (agd): integrate suggestions from Michel

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: check before checking pci bridge registers 2015-10-27T00:53:42+00:00 Alex Deucher alexander.deucher@amd.com 2015-10-06T13:38:45+00:00 b2e33f9e0ef4847f3d7c265f8adb478e7a74cb4c commit e79d5c0870eedce94e5f5a2ffab30511e48fa144 upstream. Make sure we are not the root device before attempting to read the pcie bridge registers to check the pcie gen speeed. Fixes a crash when the device is passed through to a VM. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e79d5c0870eedce94e5f5a2ffab30511e48fa144 upstream.

Make sure we are not the root device before attempting to
read the pcie bridge registers to check the pcie gen speeed.

Fixes a crash when the device is passed through to a VM.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: fix num_crtc on CZ 2015-10-27T00:53:41+00:00 Alex Deucher alexander.deucher@amd.com 2015-10-05T14:15:14+00:00 421216eb5efd68d1c6bd3e4c969f71079bd9d0af commit 26d0c21db1fd1679fcf07863741c13ba5ce37a65 upstream. Hw only has 3 crtcs. copy paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 26d0c21db1fd1679fcf07863741c13ba5ce37a65 upstream.

Hw only has 3 crtcs.  copy paste typo.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: add pm sysfs files late 2015-10-27T00:53:41+00:00 Alex Deucher alexander.deucher@amd.com 2015-09-30T21:05:40+00:00 834223b58e16b974a194ddcd8a045441984f98fc commit fa022a9b65d2886486a022fd66b20c823cd76ad9 upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fa022a9b65d2886486a022fd66b20c823cd76ad9 upstream.

They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: add pm sysfs files late 2015-10-27T00:53:41+00:00 Alex Deucher alexander.deucher@amd.com 2015-09-30T20:45:52+00:00 3f974429673759353a89f2008df46b720fe55978 commit 51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5 upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5 upstream.

They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: attach tile property to mst connector 2015-10-27T00:53:41+00:00 Dave Airlie airlied@redhat.com 2015-10-14T23:04:21+00:00 344aea6d9a64e2503967408c3e240fa9f6dd9345 commit bc8c131ccdd62d4ed4f33c6b50f92907e7c32dee upstream. This allows tiled monitors to work with radeon once mst is enabled. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bc8c131ccdd62d4ed4f33c6b50f92907e7c32dee upstream.

This allows tiled monitors to work with radeon once mst is enabled.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/dp/mst: make mst i2c transfer code more robust. 2015-10-27T00:53:40+00:00 Dave Airlie airlied@gmail.com 2015-10-14T08:51:17+00:00 48d5d0bdc5e1fddb1cd73cc85cc6fa2c9badcd93 commit ae491542cbbbcca0ec8938c37d4079a985e58440 upstream. This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ae491542cbbbcca0ec8938c37d4079a985e58440 upstream.

This zeroes the msg so no random stack data ends up getting
sent, it also limits the function to not accepting > 4
i2c msgs.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>