linux-toradex.git/drivers, branch v4.4.156 Linux kernel for Apalis and Colibri modules mei: me: allow runtime pm for platform with D0i3 2018-09-15T07:40:42+00:00 Tomas Winkler tomas.winkler@intel.com 2018-01-02T10:01:41+00:00 5597719733b819bea7cc919188c39726382b1e05 commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: <stable@vger.kernel.org> v4.13+ Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream.

>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."

However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.

Cc: <stable@vger.kernel.org> v4.13+
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip/gic: Make interrupt ID 1020 invalid 2018-09-15T07:40:41+00:00 Marc Zyngier marc.zyngier@arm.com 2015-12-16T14:11:22+00:00 eadbe44f3978fcb2ac7cd98e91ce2d986a7ae1b8 commit 327ebe1f3a9b7e20e298b39d0cff627169a28012 upstream. The GIC has no such thing as interrupt 1020: the last valid ID is 1019, and the range 1020-1023 is reserved - 1023 indicating that no interrupt is pending. So let's make sure we don't try to handle this ID. This bug has been in since the initial GIC code was introduced in 8ad68bbf7a06 ("[ARM] Add support for ARM RealView board"). Reported-by: Eric Auger <eric.auger@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 327ebe1f3a9b7e20e298b39d0cff627169a28012 upstream.

The GIC has no such thing as interrupt 1020: the last valid ID is
1019, and the range 1020-1023 is reserved - 1023 indicating that
no interrupt is pending. So let's make sure we don't try to handle
this ID.

This bug has been in since the initial GIC code was introduced in
8ad68bbf7a06 ("[ARM] Add support for ARM RealView board").

Reported-by: Eric Auger <eric.auger@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size 2018-09-15T07:40:41+00:00 Shanker Donthineni shankerd@codeaurora.org 2016-02-17T00:00:36+00:00 5e56ddc78f0e3669205ca50acee64fc6c75887b0 commit 2eca0d6ceea1f108b2d3ac81fb34698c4fd41006 upstream. Function its_alloc_tables() maintains two local variables, "order" and and "alloc_size", to hold memory size that has been allocated to ITS_BASEn. We don't always refresh the variable alloc_size whenever value of the variable order changes, causing the following two problems. - Cache flush operation with size more than required. - Information reported by pr_info is not correct. Use a helper macro that converts page order to size in bytes instead of variable "alloc_size" to fix both the problems. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2eca0d6ceea1f108b2d3ac81fb34698c4fd41006 upstream.

Function its_alloc_tables() maintains two local variables, "order" and
and "alloc_size", to hold memory size that has been allocated to
ITS_BASEn. We don't always refresh the variable alloc_size whenever
value of the variable order changes, causing the following two
problems.

  - Cache flush operation with size more than required.
  - Information reported by pr_info is not correct.

Use a helper macro that converts page order to size in bytes instead of
variable "alloc_size" to fix both the problems.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip/gicv3-its: Fix memory leak in its_free_tables() 2018-09-15T07:40:41+00:00 Shanker Donthineni shankerd@codeaurora.org 2016-02-02T02:19:44+00:00 4a0c7f6afea7d76ce53ca1f9517c2f9ac9ea13ea commit 1a485f4d2e28efd77075b2952926683d6c245633 upstream. The current ITS driver has a memory leak in its_free_tables(). It happens on tear down path of the driver when its_probe() call fails. its_free_tables() should free the exact number of pages that have been allocated, not just a single page as current code does. This patch records the memory size for each ITS_BASERn at the time of page allocation and uses the same size information when freeing pages to fix the issue. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Vikram Sethi <vikrams@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1a485f4d2e28efd77075b2952926683d6c245633 upstream.

The current ITS driver has a memory leak in its_free_tables(). It
happens on tear down path of the driver when its_probe() call fails.
its_free_tables() should free the exact number of pages that have
been allocated, not just a single page as current code does.

This patch records the memory size for each ITS_BASERn at the time of
page allocation and uses the same size information when freeing pages
to fix the issue.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Vikram Sethi <vikrams@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip/gic-v3-its: Recompute the number of pages on page size change 2018-09-15T07:40:41+00:00 Marc Zyngier marc.zyngier@arm.com 2016-01-26T14:24:15+00:00 ad37cd79428ee7206be05edba64de6aa3397587e commit 18aa60ce2751c95d3412ed06a58b8b6cfb6f88f2 upstream. When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 18aa60ce2751c95d3412ed06a58b8b6cfb6f88f2 upstream.

When the programming of a GITS_BASERn register fails because of
an unsupported ITS page size, we retry it with a smaller page size.
Unfortunately, we don't recompute the number of allocated ITS pages,
indicating the wrong value computed in the original allocation.

A convenient fix is to free the pages we allocated, update the
page size, and restart the allocation. This will ensure that
we always allocate the right amount in the case of a device
table, specially if we have to reduce the allocation order
to stay within the boundaries of the ITS maximum allocation.

Reported-and-tested-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enic: do not call enic_change_mtu in enic_probe 2018-09-15T07:40:40+00:00 Govindarajulu Varadarajan gvaradar@cisco.com 2018-07-30T16:56:54+00:00 a50422747502a5f3b925a96f36f85e2412e798ec commit cb5c6568867325f9905e80c96531d963bec8e5ea upstream. In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cb5c6568867325f9905e80c96531d963bec8e5ea upstream.

In commit ab123fe071c9 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_mio_common: fix subdevice flags for PFI subdevice 2018-09-15T07:40:39+00:00 Ian Abbott abbotti@mev.co.uk 2018-08-06T10:05:13+00:00 9ad681c4ba53e507a11de6a5ee9af89d6c6de7e2 [ Upstream commit e083926b3e269d4064825dcf2ad50c636fddf8cf ] The PFI subdevice flags indicate that the subdevice is readable and writeable, but that is only true for the supported "M-series" boards, not the older "E-series" boards. Only set the SDF_READABLE and SDF_WRITABLE subdevice flags for the M-series boards. These two flags are mainly for informational purposes. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit e083926b3e269d4064825dcf2ad50c636fddf8cf ]

The PFI subdevice flags indicate that the subdevice is readable and
writeable, but that is only true for the supported "M-series" boards,
not the older "E-series" boards.  Only set the SDF_READABLE and
SDF_WRITABLE subdevice flags for the M-series boards.  These two flags
are mainly for informational purposes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm kcopyd: avoid softlockup in run_complete_job 2018-09-15T07:40:39+00:00 John Pittman jpittman@redhat.com 2018-08-06T19:53:12+00:00 66236f1b06f6d2564fa49247cb4d26612fd6c23f [ Upstream commit 784c9a29e99eb40b842c29ecf1cc3a79e00fb629 ] It was reported that softlockups occur when using dm-snapshot ontop of slow (rbd) storage. E.g.: [ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177] ... [ 4048.034151] Workqueue: kcopyd do_work [dm_mod] [ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot] ... [ 4048.034190] Call Trace: [ 4048.034196] ? __chunk_is_tracked+0x70/0x70 [dm_snapshot] [ 4048.034200] run_complete_job+0x5f/0xb0 [dm_mod] [ 4048.034205] process_jobs+0x91/0x220 [dm_mod] [ 4048.034210] ? kcopyd_put_pages+0x40/0x40 [dm_mod] [ 4048.034214] do_work+0x46/0xa0 [dm_mod] [ 4048.034219] process_one_work+0x171/0x370 [ 4048.034221] worker_thread+0x1fc/0x3f0 [ 4048.034224] kthread+0xf8/0x130 [ 4048.034226] ? max_active_store+0x80/0x80 [ 4048.034227] ? kthread_bind+0x10/0x10 [ 4048.034231] ret_from_fork+0x35/0x40 [ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks Fix this by calling cond_resched() after run_complete_job()'s callout to the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above trace). Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 784c9a29e99eb40b842c29ecf1cc3a79e00fb629 ]

It was reported that softlockups occur when using dm-snapshot ontop of
slow (rbd) storage.  E.g.:

[ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177]
...
[ 4048.034151] Workqueue: kcopyd do_work [dm_mod]
[ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot]
...
[ 4048.034190] Call Trace:
[ 4048.034196]  ? __chunk_is_tracked+0x70/0x70 [dm_snapshot]
[ 4048.034200]  run_complete_job+0x5f/0xb0 [dm_mod]
[ 4048.034205]  process_jobs+0x91/0x220 [dm_mod]
[ 4048.034210]  ? kcopyd_put_pages+0x40/0x40 [dm_mod]
[ 4048.034214]  do_work+0x46/0xa0 [dm_mod]
[ 4048.034219]  process_one_work+0x171/0x370
[ 4048.034221]  worker_thread+0x1fc/0x3f0
[ 4048.034224]  kthread+0xf8/0x130
[ 4048.034226]  ? max_active_store+0x80/0x80
[ 4048.034227]  ? kthread_bind+0x10/0x10
[ 4048.034231]  ret_from_fork+0x35/0x40
[ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after run_complete_job()'s callout to
the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above
trace).

Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: mvebu: Fix I/O space end address calculation 2018-09-15T07:40:39+00:00 Thomas Petazzoni thomas.petazzoni@bootlin.com 2018-08-03T14:38:44+00:00 d07bbe50d1b7e98fb1afeed62506c28dd1a21700 [ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ] pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]

pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.

Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: aic94xx: fix an error code in aic94xx_init() 2018-09-15T07:40:39+00:00 Dan Carpenter dan.carpenter@oracle.com 2018-08-08T14:29:09+00:00 242343ebf645ca5c89aac3ee9503484177c7bb6a [ Upstream commit 0756c57bce3d26da2592d834d8910b6887021701 ] We accidentally return success instead of -ENOMEM on this error path. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 0756c57bce3d26da2592d834d8910b6887021701 ]

We accidentally return success instead of -ENOMEM on this error path.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>