linux-toradex.git/drivers, branch v4.4.23 Linux kernel for Apalis and Colibri modules qxl: check for kmap failures 2016-09-30T08:18:39+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-07-11T08:46:33+00:00 69b10e10f5a8c99d8df4769053be1bd71a97f770 commit f4cceb2affcd1285d4ce498089e8a79f4cd2fa66 upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1f6ad ('drm: add new QXL driver. (v1.4)') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f4cceb2affcd1285d4ce498089e8a79f4cd2fa66 upstream.

If kmap fails, it leads to memory corruption.

Fixes: f64122c1f6ad ('drm: add new QXL driver. (v1.4)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: supply: max17042_battery: fix model download bug. 2016-09-30T08:18:39+00:00 Sven Van Asbroeck thesven73@gmail.com 2016-08-12T13:10:27+00:00 97f9aa7c027126e9cb024d95a45b00505198746e commit 5381cfb6f0422da24cfa9da35b0433c0415830e0 upstream. The device's model download function returns the model data as an array of u32s, which is later compared to the reference model data. However, since the latter is an array of u16s, the comparison does not happen correctly, and model verification fails. This in turn breaks the POR initialization sequence. Fixes: 39e7213edc4f3 ("max17042_battery: Support regmap to access device's registers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5381cfb6f0422da24cfa9da35b0433c0415830e0 upstream.

The device's model download function returns the model data as
an array of u32s, which is later compared to the reference
model data. However, since the latter is an array of u16s,
the comparison does not happen correctly, and model verification
fails. This in turn breaks the POR initialization sequence.

Fixes: 39e7213edc4f3 ("max17042_battery: Support regmap to access device's registers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power_supply: tps65217-charger: fix missing platform_set_drvdata() 2016-09-30T08:18:39+00:00 Wei Yongjun weiyj.lk@gmail.com 2016-07-26T14:49:04+00:00 a596ebc52657e2b7840c5d1a8adffe4393156604 commit 33e7664a0af6e9a516f01014f39737aaa119b6d9 upstream. Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 33e7664a0af6e9a516f01014f39737aaa119b6d9 upstream.

Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.

This is detected by Coccinelle semantic patch.

Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended 2016-09-30T08:18:38+00:00 Sudeep Holla Sudeep.Holla@arm.com 2016-08-25T11:23:39+00:00 05e5e96324402c5066a763315d8159c9b8c94e22 commit 331dcf421c34d227784d07943eb01e4023a42b0a upstream. If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 331dcf421c34d227784d07943eb01e4023a42b0a upstream.

If the i2c device is already runtime suspended, if qup_i2c_suspend is
executed during suspend-to-idle or suspend-to-ram it will result in the
following splat:

WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90
Modules linked in:

CPU: 3 PID: 1593 Comm: bash Tainted: G        W       4.8.0-rc3 #14
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
PC is at clk_core_unprepare+0x80/0x90
LR is at clk_unprepare+0x28/0x40
pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145
Call trace:
 clk_core_unprepare+0x80/0x90
 qup_i2c_disable_clocks+0x2c/0x68
 qup_i2c_suspend+0x10/0x20
 platform_pm_suspend+0x24/0x68
 ...

This patch fixes the issue by executing qup_i2c_pm_suspend_runtime
conditionally in qup_i2c_suspend.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c-eg20t: fix race between i2c init and interrupt enable 2016-09-30T08:18:38+00:00 Yadi.hu yadi.hu@windriver.com 2016-09-18T10:52:31+00:00 bbf1c4d2ea4a299d38874646e441327006d52c14 commit 371a015344b6e270e7e3632107d9554ec6d27a6b upstream. the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by: Yadi.hu <yadi.hu@windriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 371a015344b6e270e7e3632107d9554ec6d27a6b upstream.

the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.

there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.

At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.

Signed-off-by: Yadi.hu <yadi.hu@windriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: flexcan: fix resume function 2016-09-30T08:18:38+00:00 Fabio Estevam fabio.estevam@nxp.com 2016-08-17T15:41:08+00:00 a68022d9b59c2fc1ebe3c4133f0e2f32b4cde065 commit 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 upstream. On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 upstream.

On a imx6ul-pico board the following error is seen during system suspend:

dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110
PM: Device 2090000.flexcan failed to resume: error -110

The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.

In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.

Based on a patch from Dong Aisheng in the NXP kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: reset: hisi-reboot: Unmap region obtained by of_iomap 2016-09-30T08:18:38+00:00 Arvind Yadav arvind.yadav.cs@gmail.com 2016-08-12T15:19:18+00:00 3ee1b560e735449509791698d4772462a9205bda commit bae170efd6c42bf116f513a1dd07639d68fa71b9 upstream. Free memory mapping, if probe is not successful. Fixes: 4a9b37371822 ("power: reset: move hisilicon reboot code") Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bae170efd6c42bf116f513a1dd07639d68fa71b9 upstream.

Free memory mapping, if probe is not successful.

Fixes: 4a9b37371822 ("power: reset: move hisilicon reboot code")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: pmcmsp-flash: Allocating too much in init_msp_flash() 2016-09-30T08:18:37+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-07-14T10:44:56+00:00 a52c63ade338cfddb7a5e779cef913624b25fded commit 79ad07d45743721010e766e65dc004ad249bd429 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa87f6d ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 79ad07d45743721010e766e65dc004ad249bd429 upstream.

There is a cut and paste issue here.  The bug is that we are allocating
more memory than necessary for msp_maps.  We should be allocating enough
space for a map_info struct (144 bytes) but we instead allocate enough
for an mtd_info struct (1840 bytes).  It's a small waste.

The other part of this is not harmful but when we allocated msp_flash
then we allocated enough space fro a map_info pointer instead of an
mtd_info pointer.  But since pointers are the same size it works out
fine.

Anyway, I decided to clean up all three allocations a bit to make them
a bit more consistent and clear.

Fixes: 68aa0fa87f6d ('[MTD] PMC MSP71xx flash/rootfs mappings')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: maps: sa1100-flash: potential NULL dereference 2016-09-30T08:18:37+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-07-15T11:06:30+00:00 45987838305b660f44b6edffc8b653361bef7390 commit dc01a28d80a42cef08c94dfc595565aaebe46d15 upstream. We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755cf36 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dc01a28d80a42cef08c94dfc595565aaebe46d15 upstream.

We check for NULL but then dereference "info->mtd" on the next line.

Fixes: 72169755cf36 ('mtd: maps: sa1100-flash: show parent device in sysfs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pwm: Mark all devices as "might sleep" 2016-09-30T08:18:37+00:00 Thierry Reding thierry.reding@gmail.com 2016-01-21T14:04:59+00:00 9aea5e0ded7355172d751cdcacf59aa06d0d036e commit ff01c944cfa939f3474c28d88223213494aedf0b upstream. Commit d1cd21427747 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: d1cd21427747 ("pwm: Set enable state properly on failed call to enable") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> 
commit ff01c944cfa939f3474c28d88223213494aedf0b upstream.

Commit d1cd21427747 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".

It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: d1cd21427747 ("pwm: Set enable state properly on failed call to enable")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>