linux-toradex.git/drivers, branch v4.4.32

scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression

2016-11-15T06:46:40+00:00

commit 5e5ec1759dd663a1d5a2f10930224dd009e500e8 upstream.

This patch will fix regression caused by commit 1e793f6fc0db ("scsi:
megaraid_sas: Fix data integrity failure for JBOD (passthrough)
devices").

The problem was that the MEGASAS_IS_LOGICAL macro did not have braces
and as a result the driver ended up exposing a lot of non-existing SCSI
devices (all SCSI commands to channels 1,2,3 were returned as
SUCCESS-DID_OK by driver).

[mkp: clarified patch description]

Fixes: 1e793f6fc0db920400574211c48f9157a37e3945
Reported-by: Jens Axboe 
Signed-off-by: Kashyap Desai 
Signed-off-by: Sumit Saxena 
Tested-by: Sumit Saxena 
Reviewed-by: Tomas Henzl 
Tested-by: Jens Axboe 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix DP mode validation

2016-11-15T06:46:40+00:00

commit ff0bd441bdfbfa09d05fdba9829a0401a46635c1 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/radeon/dp: add back special handling for NUTMEG

2016-11-15T06:46:40+00:00

commit c8213a638f65bf487c10593c216525952cca3690 upstream.

When I fixed the dp rate selection in:
092c96a8ab9d1bd60ada2ed385cc364ce084180e
drm/radeon: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips.  They require a fixed link rate.

Reviewed-by: Christian König 
Reviewed-by: Ken Wang 
Reviewed-by: Harry Wentland 
Tested-by: Ken Moffat 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: fix DP mode validation

2016-11-15T06:46:40+00:00

commit c47b9e0944e483309d66c807d650ac8b8ceafb57 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/dp: add back special handling for NUTMEG

2016-11-15T06:46:40+00:00

commit 02d27234759dc4fe14a880ec1e1dee108cb0b503 upstream.

When I fixed the dp rate selection in:
3b73b168cffd9c392584d3f665021fa2190f8612
drm/amdgpu: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips.  They require a fixed link rate.

Reviewed-by: Christian König 
Reviewed-by: Ken Wang 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

of: silence warnings due to max() usage

2016-11-15T06:46:39+00:00

commit aaaab56dba9af4fe75461e0ee13231c1a6ea174d upstream.

pageblock_order can be (at least) an unsigned int or an unsigned long
depending on the kernel config and architecture, so use max_t(unsigned
long ...) when comparing it.

fixes these warnings:

In file included from include/linux/list.h:8:0,
                 from include/linux/kobject.h:20,
                 from include/linux/of.h:21,
                 from drivers/of/of_reserved_mem.c:17:
drivers/of/of_reserved_mem.c: In function ‘__reserved_mem_alloc_size’:
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);  \
                 ^
include/linux/kernel.h:747:9: note: in definition of macro ‘max’
  typeof(y) _max2 = (y);   \
         ^
drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’
   align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord
                                                ^
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);  \
                 ^
include/linux/kernel.h:747:21: note: in definition of macro ‘max’
  typeof(y) _max2 = (y);   \
                     ^
drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’
   align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord
                                                ^

Fixes: 1cc8e3458b51 ("drivers: of: of_reserved_mem: fixup the alignment with CMA setup")
Signed-off-by: Stephen Rothwell 
Signed-off-by: Rob Herring 
Cc: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

net: add recursion limit to GRO

2016-11-15T06:46:38+00:00

[ Upstream commit fcd91dd449867c6bfe56a81cabba76b829fd05cd ]

Currently, GRO can do unlimited recursion through the gro_receive
handlers.  This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem.  Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.

This patch adds a recursion counter to the GRO layer to prevent stack
overflow.  When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally.  This recursion
counter is put in the GRO CB, but could be turned into a percpu counter
if we run out of space in the CB.

Thanks to Vladimír Beneš  for the initial bug report.

Fixes: CVE-2016-7039
Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.")
Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Jiri Benc 
Acked-by: Hannes Frederic Sowa 
Acked-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fec: set mac address unconditionally

2016-11-15T06:46:37+00:00

[ Upstream commit b82d44d78480faff7456e9e0999acb9d38666057 ]

If the mac address origin is not dt, you can only safely assign a mac
address after "link up" of the device. If the link is off the clocks are
disabled and because of issues assigning registers when clocks are off the
new mac address cannot be written in .ndo_set_mac_address() on some soc's.
This fix sets the mac address unconditionally in fec_restart(...) and
ensures consistency between fec registers and the network layer.

Signed-off-by: Gavin Schenk 
Acked-by: Fugang Duan 
Acked-by: Uwe Kleine-König 
Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address")
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tg3: Avoid NULL pointer dereference in tg3_io_error_detected()

2016-11-15T06:46:37+00:00

[ Upstream commit 1b0ff89852d79354e8a091c81a88df21f5aa9f0a ]

While the driver is probing the adapter, an error may occur before the
netdev structure is allocated and attached to pci_dev. In this case,
not only netdev isn't available, but the tg3 private structure is also
not available as it is just math from the NULL pointer, so dereferences
must be skipped.

The following trace is seen when the error is triggered:

  [1.402247] Unable to handle kernel paging request for data at address 0x00001a99
  [1.402410] Faulting instruction address: 0xc0000000007e33f8
  [1.402450] Oops: Kernel access of bad area, sig: 11 [#1]
  [1.402481] SMP NR_CPUS=2048 NUMA PowerNV
  [1.402513] Modules linked in:
  [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu
  [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000
  [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0
  [1.402787] REGS: c000001fe4e8b790 TRAP: 0300   Not tainted  (4.4.0-36-generic)
  [1.402832] MSR: 9000000100009033   CR: 28000422  XER: 20000000
  [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1
  GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000
  GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299
  GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006
  GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768
  GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002
  GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000
  [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340
  [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340

This patch avoids the NULL pointer dereference by moving the access after
the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a
check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan].

Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery")
Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error")
Tested-by: Guilherme G. Piccoli 
Signed-off-by: Milton Miller 
Signed-off-by: Guilherme G. Piccoli 
Acked-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

HID: usbhid: add ATEN CS962 to list of quirky devices

2016-11-10T15:36:37+00:00

commit cf0ea4da4c7df11f7a508b2f37518e0f117f3791 upstream.

Like many similar devices it needs a quirk to work.
Issuing the request gets the device into an irrecoverable state.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman