linux-toradex.git/drivers, branch v4.4.36 Linux kernel for Apalis and Colibri modules scsi: mpt3sas: Unblock device after controller reset 2016-12-02T08:09:02+00:00 Suganath Prabu S suganath-prabu.subramani@broadcom.com 2016-11-17T10:45:58+00:00 6eddf5c993dd9bf4efcf2509e4ca633b9441a66a commit 7ff723ad0f87feba43dda45fdae71206063dd7d4 upstream. While issuing any ATA passthrough command to firmware the driver will block the device. But it will unblock the device only if the I/O completes through the ISR path. If a controller reset occurs before command completion the device will remain in blocked state. Make sure we unblock the device following a controller reset if an ATA passthrough command was queued. [mkp: clarified patch description] Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset") Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7ff723ad0f87feba43dda45fdae71206063dd7d4 upstream.

While issuing any ATA passthrough command to firmware the driver will
block the device. But it will unblock the device only if the I/O
completes through the ISR path. If a controller reset occurs before
command completion the device will remain in blocked state.

Make sure we unblock the device following a controller reset if an ATA
passthrough command was queued.

[mkp: clarified patch description]

Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset")
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: fix return value on disconnection 2016-12-02T08:09:02+00:00 Tomas Winkler tomas.winkler@intel.com 2016-06-22T21:25:31+00:00 0b7860d6e88c35deb46e65d3f7d2ebfaa6b38219 commit 2d4d5481e2d6f93b25fcfb13a9f20bbfbf54266a upstream. Correct errno on client disconnection is -ENODEV not -EBUSY Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2d4d5481e2d6f93b25fcfb13a9f20bbfbf54266a upstream.

Correct errno on client disconnection is -ENODEV not -EBUSY

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: me: fix place for kaby point device ids. 2016-12-02T08:09:01+00:00 Tomas Winkler tomas.winkler@intel.com 2016-11-29T12:44:45+00:00 bab2f72f70eae417c871d9b24b3fa5dd0dea254b This is fix of the backported patch only, it places KBL DIDs on correct place to easy on backporting of further DIDs. Fixes: 5c99f32c461c ('mei: me: add kaby point device ids') Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This is fix of the backported patch only, it places
KBL DIDs on correct place to easy on backporting of
further DIDs.

Fixes: 5c99f32c461c ('mei: me: add kaby point device ids')
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: me: disable driver on SPT SPS firmware 2016-12-02T08:09:01+00:00 Tomas Winkler tomas.winkler@intel.com 2016-07-20T07:24:02+00:00 4f13967ecd20e32ab9564231e872d57f79fb61ef commit 8c57cac1457f3125a5d13dc03635c0708c61bff0 upstream. Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Tested-by: Sujith Pandel <sujith_pandel@dell.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8c57cac1457f3125a5d13dc03635c0708c61bff0 upstream.

Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
The SPS Firmware is identifiable only on the first PCI function
of the device.

Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on 2016-12-02T08:09:01+00:00 Michel Dänzer michel@daenzer.net 2016-11-29T09:40:20+00:00 e1049372d7a7196f036664e7b909fa2ec22ed5b8 NOTE: This patch only applies to 4.5.y or older kernels. With newer kernels, this problem cannot happen because the driver now uses drm_crtc_vblank_on/off instead of drm_vblank_pre/post_modeset[0]. I consider this patch safer for older kernels than backporting the API change, because drm_crtc_vblank_on/off had various issues in older kernels, and I'm not sure all fixes for those have been backported to all stable branches where this patch could be applied. --------------------- Fixes the vblank interrupt being disabled when it should be on, which can cause at least the following symptoms: * Hangs when running 'xset dpms force off' in a GNOME session with gnome-shell using DRI2. * RandR 1.4 slave outputs freezing with garbage displayed using xf86-video-ati 7.8.0 or newer. [0] See upstream commit: commit 777e3cbc791f131806d9bf24b3325637c7fc228d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 21 11:08:57 2016 +0100 drm/radeon: Switch to drm_vblank_on/off Reported-and-Tested-by: Max Staudt <mstaudt@suse.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> 
NOTE: This patch only applies to 4.5.y or older kernels. With newer
kernels, this problem cannot happen because the driver now uses
drm_crtc_vblank_on/off instead of drm_vblank_pre/post_modeset[0]. I
consider this patch safer for older kernels than backporting the API
change, because drm_crtc_vblank_on/off had various issues in older
kernels, and I'm not sure all fixes for those have been backported to
all stable branches where this patch could be applied.

    ---------------------

Fixes the vblank interrupt being disabled when it should be on, which
can cause at least the following symptoms:

* Hangs when running 'xset dpms force off' in a GNOME session with
  gnome-shell using DRI2.
* RandR 1.4 slave outputs freezing with garbage displayed using
  xf86-video-ati 7.8.0 or newer.

[0] See upstream commit:

commit 777e3cbc791f131806d9bf24b3325637c7fc228d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 21 11:08:57 2016 +0100

    drm/radeon: Switch to drm_vblank_on/off

Reported-and-Tested-by: Max Staudt <mstaudt@suse.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
scsi: mpt3sas: Fix secure erase premature termination 2016-12-02T08:09:01+00:00 Andrey Grodzovsky andrey2805@gmail.com 2016-11-10T14:35:27+00:00 ffffc1ed47e76d13cafbc645792ca184331b3123 commit 18f6084a989ba1b38702f9af37a2e4049a924be6 upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <linux-scsi@vger.kernel.org> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 18f6084a989ba1b38702f9af37a2e4049a924be6 upstream.

This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming
secure erase. Due to the very long time the operation takes, commands
issued during the erase will time out and will trigger execution of the
abort hook. Even though the abort hook is called for the specific
command which timed out, this leads to entire device halt
(scsi_state terminated) and premature termination of the secure erase.

Set device state to busy while ATA passthrough commands are in progress.

[mkp: hand applied to 4.9/scsi-fixes, tweaked patch description]

Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y 2016-12-02T08:09:00+00:00 Petr Vandrovec petr@vandrovec.name 2016-11-10T21:57:14+00:00 ab0867dd8bc8b33ac662467b2d6cf2aff2516abc commit 2ce9d2272b98743b911196c49e7af5841381c206 upstream. Some code (all error handling) submits CDBs that are allocated on the stack. This breaks with CB/CBI code that tries to create URB directly from SCSI command buffer - which happens to be in vmalloced memory with vmalloced kernel stacks. Let's make copy of the command in usb_stor_CB_transport. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2ce9d2272b98743b911196c49e7af5841381c206 upstream.

Some code (all error handling) submits CDBs that are allocated
on the stack.  This breaks with CB/CBI code that tries to create
URB directly from SCSI command buffer - which happens to be in
vmalloced memory with vmalloced kernel stacks.

Let's make copy of the command in usb_stor_CB_transport.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad 2016-12-02T08:09:00+00:00 Doug Brown doug@schmorgal.com 2016-11-05T04:18:20+00:00 f3f95f177269f0bafb125769cc6299cec4622574 commit 9bfef729a3d11f04d12788d749a3ce6b47645734 upstream. This patch adds support for the TI CC3200 LaunchPad board, which uses a custom USB vendor ID and product ID. Channel A is used for JTAG, and channel B is used for a UART. Signed-off-by: Doug Brown <doug@schmorgal.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9bfef729a3d11f04d12788d749a3ce6b47645734 upstream.

This patch adds support for the TI CC3200 LaunchPad board, which uses a
custom USB vendor ID and product ID. Channel A is used for JTAG, and
channel B is used for a UART.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add ID for the Zone DPMX 2016-12-02T08:09:00+00:00 Paul Jakma paul@jakma.org 2016-11-16T10:13:49+00:00 1f36db0b397fd490d296b6e526d593faea2960aa commit 2ab13292d7a314fa45de0acc808e41aaad31989c upstream. The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB serial interface in its charging dock for the control pods, via which some settings for the pods can be modified. Signed-off-by: Paul Jakma <paul@jakma.org> Cc: Barry Redmond <barry@brimbrothers.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2ab13292d7a314fa45de0acc808e41aaad31989c upstream.

The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB
serial interface in its charging dock for the control pods, via which some
settings for the pods can be modified.

Signed-off-by: Paul Jakma <paul@jakma.org>
Cc: Barry Redmond <barry@brimbrothers.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: move the lock initialization to core file 2016-12-02T08:09:00+00:00 Peter Chen peter.chen@nxp.com 2016-11-15T10:05:33+00:00 55d061bf9d23bb8c5ada8c4f00b083894a146f2c commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8) [ 46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream.

This can fix below dump when the lock is accessed at host
mode due to it is not initialized.

[   46.119638] INFO: trying to register non-static key.
[   46.124643] the code is fine but needs lockdep annotation.
[   46.130144] turning off the locking correctness validator.
[   46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210
[   46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[   46.148923] Backtrace:
[   46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c)
[   46.159038]  r7:edf52000
[   46.161412]  r6:60000193
[   46.163967]  r5:00000000
[   46.165035]  r4:c0e25c2c

[   46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8)
[   46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c)
[   46.184554]  r10:c0e25d24
[   46.187014]  r9:edf53e70
[   46.189569]  r8:c1642444
[   46.190637]  r7:ee9da024
[   46.193191]  r6:00000000
[   46.194258]  r5:00000000
[   46.196812]  r4:00000000
[   46.199185]  r3:00000001

[   46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0)
[   46.211797]  r10:c0e25d24
[   46.214257]  r9:edf53e70
[   46.216813]  r8:ee9da024
[   46.217880]  r7:c1642444
[   46.220435]  r6:edcd1800
[   46.221502]  r5:60000193
[   46.224057]  r4:00000000

[   46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94)
[   46.235710]  r10:00000001
[   46.238169]  r9:edf53e70
[   46.240723]  r8:edf53f80
[   46.241790]  r7:00000001
[   46.244344]  r6:00000001
[   46.245412]  r5:60000193
[   46.247966]  r4:00000000

[   46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54)
[   46.260319]  r7:ee1c6a00
[   46.262691]  r6:c062a570
[   46.265247]  r5:20000113
[   46.266314]  r4:ee9da014

[   46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70)
[   46.279280]  r6:eebd2000
[   46.281652]  r5:ee9da010
[   46.284207]  r4:ee9da014

[   46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8)
[   46.294655]  r9:edf53e70
[   46.297028]  r8:edf53f80
[   46.299583]  r7:ee1c6a00
[   46.300650]  r6:00000001
[   46.303205]  r5:00000000
[   46.304273]  r4:eebd2000
[   46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c)
[   46.314348]  r10:00000000
[   46.316808]  r9:c0a6ad30
[   46.319363]  r8:edf53f80
[   46.320430]  r7:00020000
[   46.322986]  r6:b6de3000
[   46.324053]  r5:ee1c6a00
[   46.326607]  r4:c0248b58

[   46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118)
[   46.338262]  r9:edf52000
[   46.340635]  r8:c0107fc4
[   46.343190]  r7:00020000
[   46.344257]  r6:edf53f80
[   46.346812]  r5:c039e810
[   46.347879]  r4:ee1c6a00
[   46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c)
[   46.357597]  r9:edf52000
[   46.359969]  r8:c0107fc4
[   46.362524]  r7:edf53f80
[   46.363592]  r6:b6de3000
[   46.366147]  r5:ee1c6a00
[   46.367214]  r4:00020000
[   46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8)
[   46.376672]  r8:c0107fc4
[   46.379045]  r7:00020000
[   46.381600]  r6:b6de3000
[   46.382667]  r5:ee1c6a00
[   46.385222]  r4:ee1c6a00

[   46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c)
[   46.395314]  r7:00000003
[   46.397687]  r6:b6de3000
[   46.400243]  r5:00020000
[   46.401310]  r4:00020000

Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>