linux-toradex.git/drivers, branch v4.4.57

isdn/gigaset: fix NULL-deref at probe

2017-03-26T10:13:19+00:00

commit 68c32f9c2a36d410aa242e661506e5b2c2764179 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection")
Cc: Hansjoerg Lipp 
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

target: Fix VERIFY_16 handling in sbc_parse_cdb

2017-03-26T10:13:19+00:00

commit 13603685c1f12c67a7a2427f00b63f39a2b6f7c9 upstream.

As reported by Max, the Windows 2008 R2 chkdsk utility expects
VERIFY_16 to be supported, and does not handle the returned
CHECK_CONDITION properly, resulting in an infinite loop.

The kernel will log huge amounts of this error:

kernel: TARGET_CORE[iSCSI]: Unsupported SCSI Opcode 0x8f, sending
CHECK_CONDITION.

Signed-off-by: Max Lohrmann 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: add lock around task lists to fix list corruption regression

2017-03-26T10:13:19+00:00

commit 6f8830f5bbab16e54f261de187f3df4644a5b977 upstream.

There's a rather long standing regression from the commit "libiscsi:
Reduce locking contention in fast path"

Depending on iSCSI target behavior, it's possible to hit the case in
iscsi_complete_task where the task is still on a pending list
(!list_empty(&task->running)).  When that happens the task is removed
from the list while holding the session back_lock, but other task list
modification occur under the frwd_lock.  That leads to linked list
corruption and eventually a panicked system.

Rather than back out the session lock split entirely, in order to try
and keep some of the performance gains this patch adds another lock to
maintain the task lists integrity.

Major enterprise supported kernels have been backing out the lock split
for while now, thanks to the efforts at IBM where a lab setup has the
most reliable reproducer I've seen on this issue.  This patch has been
tested there successfully.

Signed-off-by: Chris Leech 
Fixes: 659743b02c41 ("[SCSI] libiscsi: Reduce locking contention in fast path")
Reported-by: Prashantha Subbarao 
Reviewed-by: Guilherme G. Piccoli 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Add shutdown method for kexec

2017-03-26T10:13:19+00:00

commit 85e8a23936ab3442de0c42da97d53b29f004ece1 upstream.

We see lpfc devices regularly fail during kexec. Fix this by adding a
shutdown method which mirrors the remove method.

Signed-off-by: Anton Blanchard 
Reviewed-by: Mauricio Faria de Oliveira 
Tested-by: Mauricio Faria de Oliveira 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export

2017-03-26T10:13:19+00:00

commit a04e54f2c35823ca32d56afcd5cea5b783e2f51a upstream.

The following fixes a divide by zero OOPs with TYPE_TAPE
due to pscsi_tape_read_blocksize() failing causing a zero
sd->sector_size being propigated up via dev_attrib.hw_block_size.

It also fixes another long-standing bug where TYPE_TAPE and
TYPE_MEDIMUM_CHANGER where using pscsi_create_type_other(),
which does not call scsi_device_get() to take the device
reference.  Instead, rename pscsi_create_type_rom() to
pscsi_create_type_nondisk() and use it for all cases.

Finally, also drop a dump_stack() in pscsi_get_blocks() for
non TYPE_DISK, which in modern target-core can get invoked
via target_sense_desc_format() during CHECK_CONDITION.

Reported-by: Malcolm Haak 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

md/raid1/10: fix potential deadlock

2017-03-26T10:13:19+00:00

commit 61eb2b43b99ebdc9bc6bc83d9792257b243e7cb3 upstream.

Neil Brown pointed out a potential deadlock in raid 10 code with
bio_split/chain. The raid1 code could have the same issue, but recent
barrier rework makes it less likely to happen. The deadlock happens in
below sequence:

1. generic_make_request(bio), this will set current->bio_list
2. raid10_make_request will split bio to bio1 and bio2
3. __make_request(bio1), wait_barrer, add underlayer disk bio to
current->bio_list
4. __make_request(bio2), wait_barrer

If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
raise_barrier waits for IO completion from 3. And since raise_barrier
sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
dispatched because raid10_make_request() doesn't finished yet.

The solution is to adjust the IO ordering. Quotes from Neil:
"
It is much safer to:

    if (need to split) {
        split = bio_split(bio, ...)
        bio_chain(...)
        make_request_fn(split);
        generic_make_request(bio);
   } else
        make_request_fn(mddev, bio);

This way we first process the initial section of the bio (in 'split')
which will queue some requests to the underlying devices.  These
requests will be queued in generic_make_request.
Then we queue the remainder of the bio, which will be added to the end
of the generic_make_request queue.
Then we return.
generic_make_request() will pop the lower-level device requests off the
queue and handle them first.  Then it will process the remainder
of the original bio once the first section has been fully processed.
"

Note, this only happens in read path. In write path, the bio is flushed to
underlaying disks either by blk flush (from schedule) or offladed to raid1/10d.
It's queued in current->bio_list.

Cc: Coly Li 
Suggested-by: NeilBrown 
Reviewed-by: Jack Wang 
Signed-off-by: Shaohua Li 
Signed-off-by: Greg Kroah-Hartman

cpufreq: Fix and clean up show_cpuinfo_cur_freq()

2017-03-26T10:13:19+00:00

commit 9b4f603e7a9f4282aec451063ffbbb8bb410dcd9 upstream.

There is a missing newline in show_cpuinfo_cur_freq(), so add it,
but while at it clean that function up somewhat too.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Viresh Kumar 
Signed-off-by: Greg Kroah-Hartman

hv_netvsc: use skb_get_hash() instead of a homegrown implementation

2017-03-26T10:13:18+00:00

commit 757647e10e55c01fb7a9c4356529442e316a7c72 upstream.

Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add
VLAN ID to flow_keys")) introduced a performance regression in netvsc
driver. Is problem is, however, not the above mentioned commit but the
fact that netvsc_set_hash() function did some assumptions on the struct
flow_keys data layout and this is wrong.

Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change
will also imply switching to Jenkins hash from the currently used Toeplitz
but it seems there is no good excuse for Toeplitz to stay.

Signed-off-by: Vitaly Kuznetsov 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Cc: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

tpm_tis: Use devm_free_irq not free_irq

2017-03-26T10:13:18+00:00

commit 727f28b8ca24a581c7bd868326b8cea1058c720a upstream.

The interrupt is always allocated with devm_request_irq so it
must always be freed with devm_free_irq.

Fixes: 448e9c55c12d ("tpm_tis: verify interrupt during init")
Signed-off-by: Jason Gunthorpe 
Acked-by: Jarkko Sakkinen 
Tested-by: Jarkko Sakkinen 
Tested-by: Martin Wilck 
Signed-off-by: Jarkko Sakkinen 
Acked-by: Peter Huewe 
Cc: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: add missing irq.h include

2017-03-26T10:13:18+00:00

commit e9c5e7402dad6f4f04c2430db6f283512bcd4392 upstream.

this fixes the build on arm.

Signed-off-by: Dave Airlie 
Cc: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman