linux-toradex.git/drivers, branch v4.4.59

pinctrl: qcom: Don't clear status bit on irq_unmask

2017-03-31T07:49:53+00:00

commit a6566710adaa4a7dd5e0d99820ff9c9c30ee5951 upstream.

Clearing the status bit on irq_unmask will discard any pending interrupt
that did arrive after the irq_ack, i.e. while the IRQ handler function
was executing.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: Stephen Boyd 
Reported-by: Timur Tabi 
Signed-off-by: Bjorn Andersson 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

virtio_balloon: init 1st buffer in stats vq

2017-03-31T07:49:53+00:00

commit fc8653228c8588a120f6b5dad6983b7b61ff669e upstream.

When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.

This patch updates the stats before pushing the initial buffer.

Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
  virtio implementation and violates the spec "Driver MUST supply the
  same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
  spec clause, plus "invalid tag" is not really defined.

Note: the spec says:
	When using the legacy interface, the device SHOULD ignore all values in
	the first buffer in the statsq supplied by the driver after device
	initialization. Note: Historically, drivers supplied an uninitialized
	buffer in the first buffer.

Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.

Signed-off-by: Ladi Prosek 
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

fbcon: Fix vc attr at deinit

2017-03-30T07:35:20+00:00

commit 8aac7f34369726d1a158788ae8aff3002d5eb528 upstream.

fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust
the vc attrs dynamically when vc_hi_font_mask is changed at
fbcon_init().  When the vc_hi_font_mask is set, it remaps the attrs in
the existing console buffer with one bit shift up (for 9 bits), while
it remaps with one bit shift down (for 8 bits) when the value is
cleared.  It works fine as long as the font gets updated after fbcon
was initialized.

However, we hit a bizarre problem when the console is switched to
another fb driver (typically from vesafb or efifb to drmfb).  At
switching to the new fb driver, we temporarily rebind the console to
the dummy console, then rebind to the new driver.  During the
switching, we leave the modified attrs as is.  Thus, the new fbcon
takes over the old buffer as if it were to contain 8 bits chars
(although the attrs are still shifted for 9 bits), and effectively
this results in the yellow color texts instead of the original white
color, as found in the bugzilla entry below.

An easy fix for this is to re-adjust the attrs before leaving the
fbcon at con_deinit callback.  Since the code to adjust the attrs is
already present in the current fbcon code, in this patch, we simply
factor out the relevant code, and call it from fbcon_deinit().

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619
Signed-off-by: Takashi Iwai 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Cc: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Detach low-level driver during PCI error recovery

2017-03-30T07:35:20+00:00

From: Gabriel Krisman Bertazi 

[ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ]

During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed.  Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device.  Those end up
racing with the EEH recovery, crashing it.  Similar races were also
observed when opening the device and when shutting it down during
recovery.

This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards.  Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery.  This is similar to the solution used by the JSM serial
driver.

I thank Peter Hurley  for valuable input on
this one over one year ago.

Signed-off-by: Gabriel Krisman Bertazi 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

ACPI / blacklist: Make Dell Latitude 3350 ethernet work

2017-03-30T07:35:20+00:00

From: Michael Pobega 

[ Upstream commit 708f5dcc21ae9b35f395865fc154b0105baf4de4 ]

The Dell Latitude 3350's ethernet card attempts to use a reserved
IRQ (18), resulting in ACPI being unable to enable the ethernet.

Adding it to acpi_rev_dmi_table[] helps to work around this problem.

Signed-off-by: Michael Pobega 
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520

2017-03-30T07:35:20+00:00

From: Alex Hung 

[ Upstream commit 9523b9bf6dceef6b0215e90b2348cd646597f796 ]

Precision 5520 and 3520 either hang at login and during suspend or reboot.

It turns out that that adding them to acpi_rev_dmi_table[] helps to work
around those issues.

Signed-off-by: Alex Hung 
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

uvcvideo: uvc_scan_fallback() for webcams with broken chain

2017-03-30T07:35:20+00:00

From: Henrik Ingo 

[ Upstream commit e950267ab802c8558f1100eafd4087fd039ad634 ]

Some devices have invalid baSourceID references, causing uvc_scan_chain()
to fail, but if we just take the entities we can find and put them
together in the most sensible chain we can think of, turns out they do
work anyway. Note: This heuristic assumes there is a single chain.

At the time of writing, devices known to have such a broken chain are
  - Acer Integrated Camera (5986:055a)
  - Realtek rtl157a7 (0bda:57a7)

Signed-off-by: Henrik Ingo 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

s390/zcrypt: Introduce CEX6 toleration

2017-03-30T07:35:20+00:00

From: Harald Freudenberger 

[ Upstream commit b3e8652bcbfa04807e44708d4d0c8cdad39c9215 ]

Signed-off-by: Harald Freudenberger 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

vfio/spapr: Postpone allocation of userspace version of TCE table

2017-03-30T07:35:20+00:00

From: Alexey Kardashevskiy 

[ Upstream commit 39701e56f5f16ea0cf8fc9e8472e645f8de91d23 ]

The iommu_table struct manages a hardware TCE table and a vmalloc'd
table with corresponding userspace addresses. Both are allocated when
the default DMA window is created and this happens when the very first
group is attached to a container.

As we are going to allow the userspace to configure container in one
memory context and pas container fd to another, we have to postpones
such allocations till a container fd is passed to the destination
user process so we would account locked memory limit against the actual
container user constrainsts.

This postpones the it_userspace array allocation till it is used first
time for mapping. The unmapping patch already checks if the array is
allocated.

Signed-off-by: Alexey Kardashevskiy 
Reviewed-by: David Gibson 
Acked-by: Alex Williamson 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman

PCI: Do any VF BAR updates before enabling the BARs

2017-03-30T07:35:20+00:00

From: Gavin Shan 

[ Upstream commit f40ec3c748c6912f6266c56a7f7992de61b255ed ]

Previously we enabled VFs and enable their memory space before calling
pcibios_sriov_enable().  But pcibios_sriov_enable() may update the VF BARs:
for example, on PPC PowerNV we may change them to manage the association of
VFs to PEs.

Because 64-bit BARs cannot be updated atomically, it's unsafe to update
them while they're enabled.  The half-updated state may conflict with other
devices in the system.

Call pcibios_sriov_enable() before enabling the VFs so any BAR updates
happen while the VF BARs are disabled.

[bhelgaas: changelog]
Tested-by: Carol Soto 
Signed-off-by: Gavin Shan 
Signed-off-by: Bjorn Helgaas 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sumit Semwal 
Signed-off-by: Greg Kroah-Hartman