linux-toradex.git/drivers, branch v4.9.124 Linux kernel for Apalis and Colibri modules i2c: imx: Fix race condition in dma read 2018-08-24T11:12:43+00:00 Esben Haabendal eha@deif.com 2018-08-16T08:43:12+00:00 44745bd15116818e831e4d1ec5fbe668c2fdf942 commit bed4ff1ed4d8f2ef5007c5c6ae1b29c5677a3632 upstream. This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bed4ff1ed4d8f2ef5007c5c6ae1b29c5677a3632 upstream.

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read.  When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.

Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: pciehp: Fix unprotected list iteration in IRQ handler 2018-08-24T11:12:43+00:00 Lukas Wunner lukas@wunner.de 2018-07-19T22:27:34+00:00 86a3d597235d7305e3acad62fe97dc59ec2db76f commit 1204e35bedf4e5015cda559ed8c84789a6dae24e upstream. Commit b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") iterates over the devices on a hotplug port's subordinate bus in pciehp's IRQ handler without acquiring pci_bus_sem. It is thus possible for a user to cause a crash by concurrently manipulating the device list, e.g. by disabling slot power via sysfs on a different CPU or by initiating a remove/rescan via sysfs. This can't be fixed by acquiring pci_bus_sem because it may sleep. The simplest fix is to avoid the list iteration altogether and just check the ignore_hotplug flag on the port itself. This works because pci_ignore_hotplug() sets the flag both on the device as well as on its parent bridge. We do lose the ability to print the name of the device blocking hotplug in the debug message, but that's probably bearable. Fixes: b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1204e35bedf4e5015cda559ed8c84789a6dae24e upstream.

Commit b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug
events for a device") iterates over the devices on a hotplug port's
subordinate bus in pciehp's IRQ handler without acquiring pci_bus_sem.
It is thus possible for a user to cause a crash by concurrently
manipulating the device list, e.g. by disabling slot power via sysfs
on a different CPU or by initiating a remove/rescan via sysfs.

This can't be fixed by acquiring pci_bus_sem because it may sleep.
The simplest fix is to avoid the list iteration altogether and just
check the ignore_hotplug flag on the port itself.  This works because
pci_ignore_hotplug() sets the flag both on the device as well as on its
parent bridge.

We do lose the ability to print the name of the device blocking hotplug
in the debug message, but that's probably bearable.

Fixes: b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: pciehp: Fix use-after-free on unplug 2018-08-24T11:12:42+00:00 Lukas Wunner lukas@wunner.de 2018-07-19T22:27:32+00:00 3fcdcdd50c1f9e60bbaab05f9a42079e481c2454 commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream. When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the hotplug_slot struct is deregistered and thus freed before freeing the IRQ. The IRQ handler and the work items it schedules print the slot name referenced from the freed structure in various informational and debug log messages, each time resulting in a quadruple dereference of freed pointers (hotplug_slot -> pci_slot -> kobject -> name). At best the slot name is logged as "(null)", at worst kernel memory is exposed in logs or the driver crashes: pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present An attacker may provoke the bug by unplugging multiple devices on a Thunderbolt daisy chain at once. Unplugging can also be simulated by powering down slots via sysfs. The bug is particularly easy to trigger in poll mode. It has been present since the driver's introduction in 2004: https://git.kernel.org/tglx/history/c/c16b4b14d980 Fix by rearranging teardown such that the IRQ is freed first. Run the work items queued by the IRQ handler to completion before freeing the hotplug_slot struct by draining the work queue from the ->release_slot callback which is invoked by pci_hp_deregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream.

When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the
hotplug_slot struct is deregistered and thus freed before freeing the
IRQ.  The IRQ handler and the work items it schedules print the slot
name referenced from the freed structure in various informational and
debug log messages, each time resulting in a quadruple dereference of
freed pointers (hotplug_slot -> pci_slot -> kobject -> name).

At best the slot name is logged as "(null)", at worst kernel memory is
exposed in logs or the driver crashes:

  pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present

An attacker may provoke the bug by unplugging multiple devices on a
Thunderbolt daisy chain at once.  Unplugging can also be simulated by
powering down slots via sysfs.  The bug is particularly easy to trigger
in poll mode.

It has been present since the driver's introduction in 2004:
https://git.kernel.org/tglx/history/c/c16b4b14d980

Fix by rearranging teardown such that the IRQ is freed first.  Run the
work items queued by the IRQ handler to completion before freeing the
hotplug_slot struct by draining the work queue from the ->release_slot
callback which is invoked by pci_hp_deregister().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Skip MPS logic for Virtual Functions (VFs) 2018-08-24T11:12:42+00:00 Myron Stowe myron.stowe@redhat.com 2018-08-13T18:19:39+00:00 73aae596d106859e1e297ff9a106a8222721b4bd commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream. PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for VFs. Just prior to the table it states: "PF and VF functionality is defined in Section 7.5.3.4 except where noted in Table 9-16. For VF fields marked 'RsvdP', the PF setting applies to the VF." All of which implies that with respect to Max_Payload_Size Supported (MPSS), MPS, and MRRS values, we should not be paying any attention to the VF's fields, but rather only to the PF's. Only looking at the PF's fields also logically makes sense as it's the sole physical interface to the PCIe bus. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge") Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 4.3+ Cc: Keith Busch <keith.busch@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Dongdong Liu <liudongdong3@huawei.com> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream.

PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both
Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for
VFs.  Just prior to the table it states:

  "PF and VF functionality is defined in Section 7.5.3.4 except where
   noted in Table 9-16.  For VF fields marked 'RsvdP', the PF setting
   applies to the VF."

All of which implies that with respect to Max_Payload_Size Supported
(MPSS), MPS, and MRRS values, we should not be paying any attention to the
VF's fields, but rather only to the PF's.  Only looking at the PF's fields
also logically makes sense as it's the sole physical interface to the PCIe
bus.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527
Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge")
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 4.3+
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hotplug: Don't leak pci_slot on registration failure 2018-08-24T11:12:41+00:00 Lukas Wunner lukas@wunner.de 2018-07-19T22:27:31+00:00 f2842452e21d088ca997a9eb26669023812402a8 commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream. If addition of sysfs files fails on registration of a hotplug slot, the struct pci_slot as well as the entry in the slot_list is leaked. The issue has been present since the hotplug core was introduced in 2002: https://git.kernel.org/tglx/history/c/a8a2069f432c Perhaps the idea was that even though sysfs addition fails, the slot should still be usable. But that's not how drivers use the interface, they abort probe if a non-zero value is returned. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.4.15+ Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream.

If addition of sysfs files fails on registration of a hotplug slot, the
struct pci_slot as well as the entry in the slot_list is leaked.  The
issue has been present since the hotplug core was introduced in 2002:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Perhaps the idea was that even though sysfs addition fails, the slot
should still be usable.  But that's not how drivers use the interface,
they abort probe if a non-zero value is returned.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.4.15+
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: qca_spi: Fix log level if probe fails 2018-08-24T11:12:40+00:00 Stefan Wahren stefan.wahren@i2se.com 2018-07-18T06:31:45+00:00 1e15542511f37da441934cbe1c672ed68781833b [ Upstream commit 50973993260a6934f0a00da53d9b746cfbea89ab ] In cases the probing fails the log level of the messages should be an error. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 50973993260a6934f0a00da53d9b746cfbea89ab ]

In cases the probing fails the log level of the messages should
be an error.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: qca_spi: Make sure the QCA7000 reset is triggered 2018-08-24T11:12:40+00:00 Stefan Wahren stefan.wahren@i2se.com 2018-07-18T06:31:44+00:00 c8697ad8ec0e7b08a61efee60b4359e533dc038a [ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ]

In case the SPI thread is not running, a simple reset of sync
state won't fix the transmit timeout. We also need to wake up the kernel
thread.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: qca_spi: Avoid packet drop during initial sync 2018-08-24T11:12:40+00:00 Stefan Wahren stefan.wahren@i2se.com 2018-07-18T06:31:43+00:00 167e93c3e131b29a117a13719d052dbe752290ae [ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ]

As long as the synchronization with the QCA7000 isn't finished, we
cannot accept packets from the upper layers. So let the SPI thread
enable the TX queue after sync and avoid unwanted packet drop.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: versatile: Fix I/O space page leak 2018-08-24T11:12:40+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2018-07-18T20:40:40+00:00 90788ea4ff753732b6958a628914094e5bd93670 [ Upstream commit 0018b265adf7e251f90d3ca1c7c0e32e2a0ad262 ] When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Versatile PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version to fix the bug. Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 0018b265adf7e251f90d3ca1c7c0e32e2a0ad262 ]

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.

Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: OF: Fix I/O space page leak 2018-08-24T11:12:40+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2018-07-18T20:40:26+00:00 3934e010d80dd944c4de659e24f7546b3828c0ec commit a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 upstream. When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 upstream.

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.

Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>