linux-toradex.git/drivers, branch v4.9.127

mei: me: allow runtime pm for platform with D0i3

2018-09-15T07:43:06+00:00

commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream.

>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."

However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.

Cc:  v4.13+
Cc: Rafael J. Wysocki 
Signed-off-by: Tomas Winkler 
Reviewed-by: Alexander Usyskin 
Signed-off-by: Greg Kroah-Hartman

enic: do not call enic_change_mtu in enic_probe

2018-09-15T07:43:01+00:00

commit cb5c6568867325f9905e80c96531d963bec8e5ea upstream.

In commit ab123fe071c9 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan 
Signed-off-by: David S. Miller 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80

2018-09-15T07:43:01+00:00

commit 25da75043f8690fd083878447c91f289dfb63b87 upstream.

Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc
instead of 8 bpc.

Apply 6 bpc quirk for the panel to fix it.

BugLink: https://bugs.launchpad.net/bugs/1788308
Cc:  # v4.8+
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman

clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399

2018-09-15T07:43:00+00:00

[ Upstream commit 640332d1a089909df08bc9f3e42888a2019c66e2 ]

PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in
RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave
from power on and the VDD_LOG is about 0.9V. When the kernel boots
normally into the system, the PWM2 keeps outputing PWM signal.

But the kernel hangs randomly after "Starting kernel ..." line on that
board. When it happens, PWM2 outputs high level which causes VDD_LOG
drops to 0.4V below the normal operating voltage.

By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array,
PWM clock is ensured to be prepared at startup and the PWM2 output is
normal. After repeated tests, the early boot hang is gone.

This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards.

Signed-off-by: Levin Du 
Signed-off-by: Heiko Stuebner 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

staging: comedi: ni_mio_common: fix subdevice flags for PFI subdevice

2018-09-15T07:42:59+00:00

[ Upstream commit e083926b3e269d4064825dcf2ad50c636fddf8cf ]

The PFI subdevice flags indicate that the subdevice is readable and
writeable, but that is only true for the supported "M-series" boards,
not the older "E-series" boards.  Only set the SDF_READABLE and
SDF_WRITABLE subdevice flags for the M-series boards.  These two flags
are mainly for informational purposes.

Signed-off-by: Ian Abbott 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dm kcopyd: avoid softlockup in run_complete_job

2018-09-15T07:42:59+00:00

[ Upstream commit 784c9a29e99eb40b842c29ecf1cc3a79e00fb629 ]

It was reported that softlockups occur when using dm-snapshot ontop of
slow (rbd) storage.  E.g.:

[ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177]
...
[ 4048.034151] Workqueue: kcopyd do_work [dm_mod]
[ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot]
...
[ 4048.034190] Call Trace:
[ 4048.034196]  ? __chunk_is_tracked+0x70/0x70 [dm_snapshot]
[ 4048.034200]  run_complete_job+0x5f/0xb0 [dm_mod]
[ 4048.034205]  process_jobs+0x91/0x220 [dm_mod]
[ 4048.034210]  ? kcopyd_put_pages+0x40/0x40 [dm_mod]
[ 4048.034214]  do_work+0x46/0xa0 [dm_mod]
[ 4048.034219]  process_one_work+0x171/0x370
[ 4048.034221]  worker_thread+0x1fc/0x3f0
[ 4048.034224]  kthread+0xf8/0x130
[ 4048.034226]  ? max_active_store+0x80/0x80
[ 4048.034227]  ? kthread_bind+0x10/0x10
[ 4048.034231]  ret_from_fork+0x35/0x40
[ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after run_complete_job()'s callout to
the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above
trace).

Signed-off-by: John Pittman 
Signed-off-by: Mike Snitzer 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PCI: mvebu: Fix I/O space end address calculation

2018-09-15T07:42:59+00:00

[ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]

pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.

Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni 
Signed-off-by: Lorenzo Pieralisi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: aic94xx: fix an error code in aic94xx_init()

2018-09-15T07:42:59+00:00

[ Upstream commit 0756c57bce3d26da2592d834d8910b6887021701 ]

We accidentally return success instead of -ENOMEM on this error path.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: John Garry 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Initialize status to ACPI_STA_DEFAULT

2018-09-15T07:42:59+00:00

[ Upstream commit 5971b0c1594d6c34e257101ed5fdffec65205c50 ]

Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().

This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.

We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.

Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.

Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix panic for failed online processing

2018-09-15T07:42:59+00:00

[ Upstream commit 7c6553d4db03350dad0110c3224194c19df76a8f ]

Fix a panic that occurs for a device that got an error in
dasd_eckd_check_characteristics() during online processing.
For example the read configuration data command may have failed.

If this error occurs the device is not being set online and the earlier
invoked steps during online processing are rolled back. Therefore
dasd_eckd_uncheck_device() is called which needs a valid private
structure. But this pointer is not valid if
dasd_eckd_check_characteristics() has failed.

Check for a valid device->private pointer to prevent a panic.

Reviewed-by: Jan Hoeppner 
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman