linux-toradex.git/drivers, branch v4.9.28

drm/ttm: fix use-after-free races in vm fault handling

2017-05-14T12:00:22+00:00

commit 3089c1df10e2931b1d72d2ffa7d86431084c86b3 upstream.

The vm fault handler relies on the fact that the VMA owns a reference
to the BO. However, once mmap_sem is released, other tasks are free to
destroy the VMA, which can lead to the BO being freed. Fix two code
paths where that can happen, both related to vm fault retries.

Found via a lock debugging warning which flagged &bo->wu_mutex as
locked while being destroyed.

Fixes: cbe12e74ee4e ("drm/ttm: Allow vm fault retries")
Signed-off-by: Nicolai Hähnle 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

wlcore: Add RX_BA_WIN_SIZE_CHANGE_EVENT event

2017-05-14T12:00:22+00:00

commit e7ee74b56f23ba447d3124f2eccc32033cca501d upstream.

This event is used by the Firmware to limit the RX BA win size
for a specific link.

The event handler updates the new size in the mac's sta->sta struct.

BA sessions opened for that link will use the new restricted
win_size. This limitation remains until a new update is received or
until the link is closed.

Signed-off-by: Maxim Altshul 
Signed-off-by: Kalle Valo 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

wlcore: Pass win_size taken from ieee80211_sta to FW

2017-05-14T12:00:22+00:00

commit 42c7372a111630dab200c2f959424f5ec3bf79a4 upstream.

When starting a new BA session, we must pass the win_size to the FW.

To do this we take max_rx_aggregation_subframes (BA RX win size)
which is stored in ieee80211_sta structure (e.g per link and not per HW)

We will use the value stored per link when passing the win_size to
firmware through the ACX_BA_SESSION_RX_SETUP command.

Signed-off-by: Maxim Altshul 
Signed-off-by: Kalle Valo 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

xen: Revert commits da72ff5bfcb0 and 72a9b186292d

2017-05-14T12:00:22+00:00

commit 84d582d236dc1f9085e741affc72e9ba061a67c2 upstream.

Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741)
established that commit 72a9b186292d ("xen: Remove event channel
notification through Xen PCI platform device") (and thus commit
da72ff5bfcb0 ("partially revert "xen: Remove event channel
notification through Xen PCI platform device"")) are unnecessary and,
in fact, prevent HVM guests from booting on Xen releases prior to 4.0

Therefore we revert both of those commits.

The summary of that discussion is below:

  Here is the brief summary of the current situation:

  Before the offending commit (72a9b186292):

  1) INTx does not work because of the reset_watches path.
  2) The reset_watches path is only taken if you have Xen > 4.0
  3) The Linux Kernel by default will use vector inject if the hypervisor
     support. So even INTx does not work no body running the kernel with
     Xen > 4.0 would notice. Unless he explicitly disabled this feature
     either in the kernel or in Xen (and this can only be disabled by
     modifying the code, not user-supported way to do it).

  After the offending commit (+ partial revert):

  1) INTx is no longer support for HVM (only for PV guests).
  2) Any HVM guest The kernel will not boot on Xen < 4.0 which does
     not have vector injection support. Since the only other mode
     supported is INTx which.

  So based on this summary, I think before commit (72a9b186292) we were
  in much better position from a user point of view.

Signed-off-by: Boris Ostrovsky 
Reviewed-by: Juergen Gross 
Cc: Boris Ostrovsky 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: x86@kernel.org
Cc: Konrad Rzeszutek Wilk 
Cc: Bjorn Helgaas 
Cc: Stefano Stabellini 
Cc: Julien Grall 
Cc: Vitaly Kuznetsov 
Cc: Paul Gortmaker 
Cc: Ross Lagerwall 
Cc: xen-devel@lists.xenproject.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: Anthony Liguori 
Cc: KarimAllah Ahmed 
Signed-off-by: Juergen Gross 
Signed-off-by: Greg Kroah-Hartman

net: mdio-mux: bcm-iproc: call mdiobus_free() in error path

2017-05-14T12:00:22+00:00

[ Upstream commit 922c60e89d52730050c6ccca218bff40cc8bcd8e ]

If an error is encountered in mdio_mux_init(), the error path will call
mdiobus_free().  Since mdiobus_register() has been called prior to
mdio_mux_init(), the bus->state will not be MDIOBUS_UNREGISTERED.  This
causes a BUG_ON() in mdiobus_free().  To correct this issue, add an
error path for mdio_mux_init() which calls mdiobus_unregister() prior to
mdiobus_free().

Signed-off-by: Jon Mason 
Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs")
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bnxt_en: allocate enough space for ->ntp_fltr_bmap

2017-05-14T12:00:21+00:00

[ Upstream commit ac45bd93a5035c2f39c9862b8b6ed692db0fdc87 ]

We have the number of longs, but we need to calculate the number of
bytes required.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Dan Carpenter 
Acked-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Telit ME910 support

2017-05-14T12:00:21+00:00

[ Upstream commit 4c54dc0277d0d55a9248c43aebd31858f926a056 ]

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas 
Acked-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

macsec: dynamically allocate space for sglist

2017-05-14T12:00:20+00:00

[ Upstream commit 5294b83086cc1c35b4efeca03644cf9d12282e5b ]

We call skb_cow_data, which is good anyway to ensure we can actually
modify the skb as such (another error from prior). Now that we have the
number of fragments required, we can safely allocate exactly that amount
of memory.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jason A. Donenfeld 
Acked-by: Sabrina Dubroca 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

staging: emxx_udc: remove incorrect __init annotations

2017-05-14T12:00:20+00:00

commit 4f3445067d5f78fb8d1970b02610f85c2f377ea4 upstream.

The probe function is not marked __init, but some other functions
are. This leads to a warning on older compilers (e.g. gcc-4.3),
and can cause executing freed memory when built with those
compilers:

WARNING: drivers/staging/emxx_udc/emxx_udc.o(.text+0x2d78): Section mismatch in reference from the function nbu2ss_drv_probe() to the function .init.text:nbu2ss_drv_contest_init()

This removes the annotations.

Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

staging: wlan-ng: add missing byte order conversion

2017-05-14T12:00:20+00:00

commit 2c474b8579e9b67ff72b2bcefce9f53c7f4469d4 upstream.

Conversion macros le16_to_cpu was removed and that caused new sparse warning

sparse output:
drivers/staging/wlan-ng/p80211netdev.c:241:44: warning: incorrect type in argument 2 (different base types)
drivers/staging/wlan-ng/p80211netdev.c:241:44:    expected unsigned short [unsigned] [usertype] fc
drivers/staging/wlan-ng/p80211netdev.c:241:44:    got restricted __le16 [usertype] fc

Fixes: 7ad82572348c ("staging:wlan-ng:Fix sparse warning")
Signed-off-by: Igor Pylypiv 
Signed-off-by: Greg Kroah-Hartman