linux-toradex.git/drivers, branch v4.9.42

net: phy: Fix PHY unbind crash

2017-08-11T15:49:37+00:00

commit 7b9a88a390dacb37b051a7b09b9a08f546edf5eb upstream.

The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.

Suggested-by: Russell King 
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

net/mlx5: E-Switch, Re-enable RoCE on mode change only after FDB destroy

2017-08-11T15:49:36+00:00

[ Upstream commit 5bae8c031053c69b4aa74b7f1ba15d4ec8426208 ]

We must re-enable RoCE on the e-switch management port (PF) only after destroying
the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported,
this re-enablement will fail.

Also, it's more natural and symmetric to disable RoCE on the PF before we create
the FDB under switchdev mode, so do that as well and revert if getting into error
during the mode change later.

Fixes: 9da34cd34e85 ('net/mlx5: Disable RoCE on the e-switch management [..]')
Signed-off-by: Or Gerlitz 
Reviewed-by: Hadar Hen Zion 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

virtio_blk: fix panic in initialization error path

2017-08-11T15:49:36+00:00

[ Upstream commit 6bf6b0aa3da84a3d9126919a94c49c0fb7ee2fb3 ]

If blk_mq_init_queue() returns an error, it gets assigned to
vblk->disk->queue. Then, when we call put_disk(), we end up calling
blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by
only assigning to vblk->disk->queue on success.

Signed-off-by: Omar Sandoval 
Reviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nbd: blk_mq_init_queue returns an error code on failure, not NULL

2017-08-11T15:49:36+00:00

[ Upstream commit 25b4acfc7de0fc4da3bfea3a316f7282c6fbde81 ]

Additionally, don't assign directly to disk->queue, otherwise
blk_put_queue (called via put_disk) will choke (panic) on the errno
stored there.

Bug found by code inspection after Omar found a similar issue in
virtio_blk.  Compile-tested only.

Signed-off-by: Jeff Moyer 
Reviewed-by: Omar Sandoval 
Reviewed-by: Josef Bacik 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iw_cxgb4: do not send RX_DATA_ACK CPLs after close/abort

2017-08-11T15:49:36+00:00

[ Upstream commit 3bcf96e0183f5c863657cb6ae9adad307a0f6071 ]

Function rx_data(), which handles ingress CPL_RX_DATA messages, was
always sending an RX_DATA_ACK with the goal of updating the credits.
However, if the RDMA connection is moved out of FPDU mode abruptly,
then it is possible for iw_cxgb4 to process queued RX_DATA CPLs after HW
has aborted the connection.  These CPLs should not trigger RX_DATA_ACKS.
If they do, HW can see a READ after DELETE of the DB_LE hash entry for
the tid and post a LE_DB HashTblMemCrcError.

Signed-off-by: Steve Wise 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/virtio: fix framebuffer sparse warning

2017-08-11T15:49:35+00:00

[ Upstream commit 71d3f6ef7f5af38dea2975ec5715c88bae92e92d ]

virtio uses normal ram as backing storage for the framebuffer, so we
should assign the address to new screen_buffer (added by commit
17a7b0b4d9749f80d365d7baff5dec2f54b0e992) instead of screen_base.

Reported-by: Michael S. Tsirkin 
Signed-off-by: Gerd Hoffmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Get mutex lock before checking optrom_state

2017-08-11T15:49:35+00:00

[ Upstream commit c7702b8c22712a06080e10f1d2dee1a133ec8809 ]

There is a race condition with qla2xxx optrom functions where one thread
might modify optrom buffer, optrom_state while other thread is still
reading from it.

In couple of crashes, it was found that we had successfully passed the
following 'if' check where we confirm optrom_state to be
QLA_SREADING. But by the time we acquired mutex lock to proceed with
memory_read_from_buffer function, some other thread/process had already
modified that option rom buffer and optrom_state from QLA_SREADING to
QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system:

        if (ha->optrom_state != QLA_SREADING)
                return 0;

        mutex_lock(&ha->optrom_mutex);
        rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
            ha->optrom_region_size);
        mutex_unlock(&ha->optrom_mutex);

With current optrom function we get following crash due to a race
condition:

[ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1479.466707] IP: [] memcpy+0x6/0x110
[...]
[ 1479.473673] Call Trace:
[ 1479.474296]  [] ? memory_read_from_buffer+0x3c/0x60
[ 1479.474941]  [] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx]
[ 1479.475571]  [] read+0xdb/0x1f0
[ 1479.476206]  [] vfs_read+0x9e/0x170
[ 1479.476839]  [] SyS_read+0x7f/0xe0
[ 1479.477466]  [] system_call_fastpath+0x16/0x1b

Below patch modifies qla2x00_sysfs_read_optrom,
qla2x00_sysfs_write_optrom functions to get the mutex_lock before
checking ha->optrom_state to avoid similar crashes.

The patch was applied and tested and same crashes were no longer
observed again.

Tested-by: Milan P. Gandhi 
Signed-off-by: Milan P. Gandhi 
Reviewed-by: Laurence Oberman 
Acked-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clk/samsung: exynos542x: mark some clocks as critical

2017-08-11T15:49:35+00:00

[ Upstream commit 318fa46cc60d37fec1e87dbf03a82aca0f5ce695 ]

Some parent clocks of the Exynos542x clock blocks, which have separate
power domains (like DISP, MFC, MSC, GSC, FSYS and G2D) must be always
enabled to access any register related to power management unit or devices
connected to it. For the time being, until a proper solution based on
runtime PM is applied, mark those clocks as critical (instead of ignore
unused or even no flags) to prevent disabling them.

Signed-off-by: Marek Szyprowski 
Acked-by: Sylwester Nawrocki 
Reviewed-by: Chanwoo Choi 
Reviewed-by: Javier Martinez Canillas 
Tested-by: Javier Martinez Canillas  [Exynos5800 Peach Pi Chromebook]
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

phy state machine: failsafe leave invalid RUNNING state

2017-08-11T15:49:35+00:00

[ Upstream commit 811a919135b980bac8009d042acdccf10dc1ef5e ]

While in RUNNING state, phy_state_machine() checks for link changes by
comparing phydev->link before and after calling phy_read_status().
This works as long as it is guaranteed that phydev->link is never
changed outside the phy_state_machine().

If in some setups this happens, it causes the state machine to miss
a link loss and remain RUNNING despite phydev->link being 0.

This has been observed running a dsa setup with a process continuously
polling the link states over ethtool each second (SNMPD RFC-1213
agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
call phy_read_status() and with that modify the link status - and
with that bricking the phy state machine.

This patch adds a fail-safe check while in RUNNING, which causes to
move to CHANGELINK when the link is gone and we are still RUNNING.

Signed-off-by: Zefir Kurtisi 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

spi: spi-axi: Free resources on error path

2017-08-11T15:49:35+00:00

[ Upstream commit 9620ca90115d4bd700f05862d3b210a266a66efe ]

We should go to 'err_put_master' here instead of returning directly.
Otherwise a call to 'spi_master_put' is missing.

Signed-off-by: Christophe JAILLET 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman