linux-toradex.git/drivers, branch v4.9.62

can: c_can: don't indicate triple sampling support for D_CAN

2017-11-15T14:53:20+00:00

commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream.

The D_CAN controller doesn't provide a triple sampling mode, so don't set
the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling
triple sampling is a no-op.

Signed-off-by: Richard Schütz 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: ifi: Fix transmitter delay calculation

2017-11-15T14:53:20+00:00

commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream.

The CANFD transmitter delay calculation formula was updated in the
latest software drop from IFI and improves the behavior of the IFI
CANFD core during bitrate switching. Use the new formula to improve
stability of the CANFD operation.

Signed-off-by: Marek Vasut 
Cc: Markus Marb 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: sun4i: handle overrun in RX FIFO

2017-11-15T14:53:20+00:00

commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream.

SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not
drained fast enough (overrun) it's getting mangled. Already received
frames are dropped - the data can't be restored.

Signed-off-by: Gerhard Bertelsmann 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Re-write the i2c address before EDID probing

2017-11-15T14:53:20+00:00

commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream.

I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.

Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.

Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID

2017-11-15T14:53:20+00:00

commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream.

Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.

This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally

2017-11-15T14:53:20+00:00

commit 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 upstream.

In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.

This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue

2017-11-15T14:53:20+00:00

commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream.

This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work
around mode set failure in 2D VMs")

With Wayland desktop and atomic mode set, during the mode setting
process there is a moment when two framebuffer sized surfaces
are being pinned.  This was not an issue with Xorg.

Since this only happens during a mode change, there should be no
performance impact by increasing allowable mem_size.

Signed-off-by: Sinclair Yeh 
Reviewed-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

rbd: use GFP_NOIO for parent stat and data requests

2017-11-15T14:53:20+00:00

commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream.

rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on
the writeback path for cloned images -- we attempt a stat on the parent
object to see if it exists and potentially read it in to call copyup.
GFP_NOIO should be used instead of GFP_KERNEL here.

Link: http://tracker.ceph.com/issues/22014
Signed-off-by: Ilya Dryomov 
Reviewed-by: David Disseldorp 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN060C to the ACPI table

2017-11-15T14:53:19+00:00

commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream.

ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Do not rely on wm preservation for ILK watermarks

2017-11-15T14:53:18+00:00

commit 8777b927b92cf5b6c29f9f9d3c737addea9ac8a7 upstream.

The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.

It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst 
Acked-by: Ville Syrjälä 
Reviewed-by: Matt Roper 
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 28283f4f359cd7cfa9e65457bb98c507a2cd0cd0)
Signed-off-by: Rodrigo Vivi 
Signed-off-by: Greg Kroah-Hartman