Pull mailbox updates from Jassi Brar:

 - fix kconfig dependencies (mhu-v3, omap2+)

 - use devie name instead of genereic imx_mu_chan as interrupt name
   (imx)

 - enable sa8255p and qcs8300 ipc controllers (qcom)

 - Fix timeout during suspend mode (bcm2835)

 - convert to use use of_property_match_string (mailbox)

 - enable mt8188 (mediatek)

 - use devm_clk_get_enabled helpers (spreadtrum)

 - fix device-id typo (rockchip)

* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox, remoteproc: omap2+: fix compile testing
  dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
  dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
  dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
  mailbox: Use of_property_match_string() instead of open-coding
  mailbox: bcm2835: Fix timeout during suspend mode
  mailbox: sprd: Use devm_clk_get_enabled() helpers
  mailbox: rockchip: fix a typo in module autoloading
  mailbox: imx: use device name in interrupt name
  mailbox: ARM_MHU_V3 should depend on ARM64

Pull i2c fixes from Wolfram Sang:

 - fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
   always be sent when needed

 - check for PCLK in the SynQuacer controller as an optional clock,
   allowing ACPI to directly provide the clock rate

 - KEBA driver Kconfig dependency fix

 - fix XIIC driver power suspend sequence

* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
  i2c: keba: I2C_KEBA should depend on KEBA_CP500
  i2c: synquacer: Deal with optional PCLK correctly
  i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

Pull more SCSI updates from James Bottomley:
 "These are mostly minor updates.

  There are two drivers (lpfc and mpi3mr) which missed the initial
  pull and a core change to retry a start/stop unit which affect
  suspend/resume"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
  scsi: lpfc: Update lpfc version to 14.4.0.5
  scsi: lpfc: Support loopback tests with VMID enabled
  scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
  scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
  scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
  scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
  scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
  scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
  scsi: mpi3mr: Update driver version to 8.12.0.0.50
  scsi: mpi3mr: Improve wait logic while controller transitions to READY state
  scsi: mpi3mr: Update MPI Headers to revision 34
  scsi: mpi3mr: Use firmware-provided timestamp update interval
  scsi: mpi3mr: Enhance the Enable Controller retry logic
  scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
  scsi: pm8001: Do not overwrite PCI queue mapping
  scsi: scsi_debug: Remove a useless memset()
  scsi: pmcraid: Convert comma to semicolon
  scsi: sd: Retry START STOP UNIT commands
  scsi: mpi3mr: A performance fix
  scsi: ufs: qcom: Update MODE_MAX cfg_bw value
  ...

Pull more s390 updates from Vasily Gorbik:

 - Clean up and improve vdso code: use SYM_* macros for function and
   data annotations, add CFI annotations to fix GDB unwinding, optimize
   the chacha20 implementation

 - Add vfio-ap driver feature advertisement for use by libvirt and
   mdevctl

* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vfio-ap: Driver feature advertisement
  s390/vdso: Use one large alternative instead of an alternative branch
  s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
  tools: Add additional SYM_*() stubs to linkage.h
  s390/vdso: Use macros for annotation of asm functions
  s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
  s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
  s390/vdso: Get rid of permutation constants

Pull fbdev fixes from Helge Deller:

 - crash fix in fbcon_putcs

 - avoid a possible string memory overflow in sisfb

 - minor code optimizations in omapfb and fbcon

* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: sisfb: Fix strbuf array overflow
  fbcon: break earlier in search_fb_in_map and search_for_mapped_con
  fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
  fbcon: Fix a NULL pointer dereference issue in fbcon_putcs

Pull drm fixes from Dave Airlie:
 "Regular fixes for the week to end the merge window, i915 and xe have a
  few each, amdgpu makes up most of it with a bunch of SR-IOV related
  fixes amongst others.

  i915:
   - Fix BMG support to UHBR13.5
   - Two PSR fixes
   - Fix colorimetry detection for DP

  xe:
   - Fix macro for checking minimum GuC version
   - Fix CCS offset calculation for some BMG SKUs
   - Fix locking on memory usage reporting via fdinfo and BO destroy
   - Fix GPU page fault handler on a closed VM
   - Fix overflow in oa batch buffer

  amdgpu:
   - MES 12 fix
   - KFD fence sync fix
   - SR-IOV fixes
   - VCN 4.0.6 fix
   - SDMA 7.x fix
   - Bump driver version to note cleared VRAM support
   - SWSMU fix
   - CU occupancy logic fix
   - SDMA queue fix"

* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
  drm/amd/pm: update workload mask after the setting
  drm/amdgpu: bump driver version for cleared VRAM
  drm/amdgpu: fix vbios fetching for SR-IOV
  drm/amdgpu: fix PTE copy corruption for sdma 7
  drm/amdkfd: Add SDMA queue quantum support for GFX12
  drm/amdgpu/vcn: enable AV1 on both instances
  drm/amdkfd: Fix CU occupancy for GFX 9.4.3
  drm/amdkfd: Update logic for CU occupancy calculations
  drm/amdgpu: skip coredump after job timeout in SRIOV
  drm/amdgpu: sync to KFD fences before clearing PTEs
  drm/amdgpu/mes12: set enable_level_process_quantum_check
  drm/i915/dp: Fix colorimetry detection
  drm/amdgpu/mes12: reduce timeout
  drm/amdgpu/mes11: reduce timeout
  drm/amdgpu: use GEM references instead of TTMs v2
  drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
  drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
  drm/amdgpu: update golden regs for gfx12
  drm/amdgpu: clean up vbios fetching code
  drm/amd/display: handle nulled pipe context in DCE110's set_drr()
  ...

amd-drm-fixes-6.12-2024-09-27:

amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix

amdgpu:
- CU occupancy logic fix
- SDMA queue fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927202819.2978109-1-alexander.deucher@amd.com

The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull power management fix from Rafael Wysocki:
 "Fix idle states enumeration in the intel_idle driver on platforms
  supporting multiple flavors of the C6 idle state (Artem Bityutskiy)"

* tag 'pm-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: fix ACPI _CST matching for newer Xeon platforms

Pull compute express link (cxl) updates from Dave Jiang:
 "Major changes address HDM decoder initialization from DVSEC ranges,
  refactoring the code related to cxl mailboxes to be independent of the
  memory devices, and adding support for shared upstream link
  access_coordinate calculation, as well as a change to remove locking
  from memory notifier callback.

  In addition, a number of misc cleanups and refactoring of the code are
  also included.

  Address HDM decoder initialization from DVSEC ranges:
   - Only register non-zero DVSEC ranges
   - Remove duplicate implementation of waiting for memory_info_valid
   - Simplify the checking of mem_enabled in  cxl_hdm_decode_init()

  Refactor the code related to cxl mailboxes to be independent of the memory devices:
   - Move cxl headers in include/linux/ to include/cxl
   - Move all mailbox related data to 'struct cxl_mailbox'
   - Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
     memory device state

  Add support for shared upstream link access_coordinate calculation for
  configurations that have multiple targets under a switch or a root
  port where the aggregated bandwidth can be greater than the upstream
  link of the switch/RP upstream link:
   - Preserve the CDAT access_coordinate from an endpoint
   - Add the support for shared upstream link access_coordinate calculation
   - Add documentation to explain how the calculations are done

  Remove locking from memory notifier callback.

  Misc cleanups:
   - Convert devm_cxl_add_root() to return using ERR_CAST()
   - cxl_test use dev_is_platform() instead of open coding
   - Remove duplicate include of header core.h in core/cdat.c
   - use scoped resource management to drop put_device() for cxl_port
   - Use scoped_guard to drop device_lock() for cxl_port
   - Refactor __devm_cxl_add_port() to drop gotos
   - Rename cxl_setup_parent_dport to cxl_dport_init_aer and
     cxl_dport_map_regs() to cxl_dport_map_ras()
   - Refactor cxl_dport_init_aer() to be more concise
   - Remove duplicate host_bridge->native_aer checking in
     cxl_dport_init_ras_reporting()
   - Fix comment for cxl_query_cmd()"

* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
  cxl: Add documentation to explain the shared link bandwidth calculation
  cxl: Calculate region bandwidth of targets with shared upstream link
  cxl: Preserve the CDAT access_coordinate for an endpoint
  cxl: Fix comment regarding cxl_query_cmd() return data
  cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
  cxl: Move mailbox related bits to the same context
  cxl: move cxl headers to new include/cxl/ directory
  cxl/region: Remove lock from memory notifier callback
  cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
  cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
  cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
  cxl/pci: Fix to record only non-zero ranges
  cxl/pci: Remove duplicate host_bridge->native_aer checking
  cxl/pci: cxl_dport_map_rch_aer() cleanup
  cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
  cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
  cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
  cxl/port: Use __free() to drop put_device() for cxl_port
  cxl: Remove duplicate included header file core.h
  tools/testing/cxl: Use dev_is_platform()
  ...