Pull char/misc/IIO driver fixes from Greg KH:
 "Here are a bunch of small IIO and interconnect and other driver fixes
  to resolve reported issues. Included in here are:

   - loads of iio driver fixes as a result of an audit of places where
    uninitialized data would leak to userspace.

   - other smaller, and normal, iio driver fixes.

   - mhi driver fix

   - interconnect driver fixes

   - pci1xxxx driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
  misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
  misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
  interconnect: icc-clk: check return values of devm_kasprintf()
  interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
  iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
  iio: temperature: tmp006: fix information leak in triggered buffer
  iio: inkern: call iio_device_put() only on mapped devices
  iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
  iio: adc: at91: call input_free_device() on allocated iio_dev
  iio: adc: ad7173: fix using shared static info struct
  iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
  iio: adc: ti-ads1119: fix information leak in triggered buffer
  iio: pressure: zpa2326: fix information leak in triggered buffer
  iio: adc: rockchip_saradc: fix information leak in triggered buffer
  iio: imu: kmx61: fix information leak in triggered buffer
  iio: light: vcnl4035: fix information leak in triggered buffer
  iio: light: bh1745: fix information leak in triggered buffer
  iio: adc: ti-ads8688: fix information leak in triggered buffer
  iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
  iio: test: Fix GTS test config
  ...

Pull driver core and debugfs fixes from Greg KH:
 "Here are some small driver core and debugfs fixes that resolve some
  reported problems:

   - debugfs runtime error reporting fixes

   - topology cpumask race-condition fix

   - MAINTAINERS file email update

  All of these have been in linux-next this week with no reported
  issues"

* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  fs: debugfs: fix open proxy for unsafe files
  MAINTAINERS: align Danilo's maintainer entries
  topology: Keep the cpumask unchanged when printing cpumap
  debugfs: fix missing mutex_destroy() in short_fops case
  fs: debugfs: differentiate short fops with proxy ops

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes that resolve some reported
  issues and have been in my tree for too long due to the holiday break.
  They resolve the following issues:

   - lots of gpib build-time fixes as reported by testers and 0-day

   - gpib logical fixes

   - mailmap fix

  All of these have been in linux-next for a while, with no reported
  issues other than the duplicated change"

* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: gpib: mite: remove unused global functions
  staging: gpib: refer to correct config symbol in tnt4882 Makefile
  mailmap: update Bingwu Zhang's email address
  staging: gpib: fix address space mixup
  staging: gpib: use ioport_map
  staging: gpib: fix pcmcia dependencies
  staging: gpib: add module author and description fields
  staging: gpib: fix Makefiles
  staging: gpib: make global 'usec_diff' functions static
  staging: gpib: Modify mismatched function name
  staging: gpib: Add lower bound check for secondary address
  staging: gpib: Fix erroneous removal of blank before newline

Pull serial driver fixes from Greg KH:
 "Here are three small serial driver fixes tree. They resolve some
  reported issues:

   - stm32 break control fix

   - 8250 runtime pm usage counter fix

   - imx driver locking fix

  All have been in my tree and linux-next for three weeks now, with no
  reported issues"

* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: use port lock wrappers for break control
  serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  tty: serial: 8250: Fix another runtime PM usage counter underflow

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 6.13-rc7.
  Included in here are:

   - usb serial new device ids

   - typec bugfixes for reported issues

   - dwc3 driver fixes

   - chipidea driver fixes

   - gadget driver fixes

   - other minor fixes for reported problems.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Neoway N723-EA support
  USB: serial: option: add MeiG Smart SRM815
  USB: serial: cp210x: add Phoenix Contact UPS Device
  usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
  usb-storage: Add max sectors quirk for Nokia 208
  usb: gadget: midi2: Reverse-select at the right place
  usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
  USB: core: Disable LPM only for non-suspended ports
  usb: fix reference leak in usb_new_device()
  usb: typec: tcpci: fix NULL pointer issue on shared irq case
  usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
  usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
  usb: typec: ucsi: Set orientation as none when connector is unplugged
  usb: gadget: configfs: Ignore trailing LF for user strings to cdev
  USB: usblp: return error when setting unsupported protocol
  usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
  usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
  usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
  usb: dwc3-am62: Disable autosuspend during remove
  usb: dwc3: gadget: fix writing NYET threshold

Pull hwmon fix from Guenter Roeck:
 "One patch to fix error handling in drivetemp driver"

* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur

Pull thermal control fix from Rafael Wysocki:
 "Fix an OF node leak in the code parsing thermal zone DT properties
  (Joe Hattori)"

* tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: of: fix OF node leak in of_thermal_zone_find()

Pull ACPI fixes from Rafael Wysocki:
 "Add two more ACPI IRQ override quirks and update the code using them
  to avoid unnecessary overhead (Hans de Goede)"

* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: acpi_dev_irq_override(): Check DMI match last
  ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
  ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.

  There is a bigger bunch of mediatek patches that I considered not
  including at this stage, but all the changes (except for one were
  obvious small fixes, and the rotation one is a few lines, and I
  suppose will help someone have their screen up the right way), I
  decided to include it since I expect it got slowed down by holidays
  etc, and it's not that mainstream a hw platform.

  i915:
   - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
     check_link"

  amdgpu:
   - Display interrupt fixes
   - Fix display max surface mismatches
   - Fix divide error in DM plane scale calcs
   - Display divide by 0 checks in dml helpers
   - SMU 13 AD/DC interrrupt handling fix
   - Fix locking around buddy trim handling

  amdkfd:
   - Fix page fault with shader debugger enabled
   - Fix eviction fence wq handling

  xe:
   - Avoid a NULL ptr deref when wedging
   - Fix power gate sequence on DG1

  mediatek:
   - Revert "drm/mediatek: dsi: Correct calculation formula of PHY
     Timing"
   - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
     returns err
   - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
   - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
   - Add support for 180-degree rotation in the display driver
   - Stop selecting foreign drivers
   - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
   - Fix YCbCr422 color format issue for DP
   - Fix mode valid issue for dp
   - dp: Reference common DAI properties
   - dsi: Add registers to pdata to fix MT8186/MT8188
   - Remove unneeded semicolon
   - Add return value check when reading DPCD
   - Initialize pointer in mtk_drm_of_ddp_path_build_one()"

* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
  drm/xe/dg1: Fix power gate sequence.
  drm/xe: Fix tlb invalidation when wedging
  Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  drm/amdgpu: Add a lock when accessing the buddy trim function
  drm/amd/pm:  fix BUG: scheduling while atomic
  drm/amdkfd: wq_release signals dma_fence only when available
  drm/amd/display: Add check for granularity in dml ceil/floor helpers
  drm/amdkfd: fixed page fault when enable MES shader debugger
  drm/amd/display: fix divide error in DM plane scale calcs
  drm/amd/display: increase MAX_SURFACES to the value supported by hw
  drm/amd/display: fix page fault due to max surface definition mismatch
  drm/amd/display: Remove unnecessary amdgpu_irq_get/put
  drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
  drm/mediatek: Add return value check when reading DPCD
  drm/mediatek: Remove unneeded semicolon
  drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
  dt-bindings: display: mediatek: dp: Reference common DAI properties
  drm/mediatek: Fix mode valid issue for dp
  drm/mediatek: Fix YCbCr422 color format issue for DP
  Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
  ...

Pull RISC-V fixes from Palmer Dabbelt:

 - a handful of selftest fixes

 - fix a memory leak in relocation processing during module loading

 - avoid sleeping in die()

 - fix kprobe instruction slot address calculations

 - fix DT node reference leak in SBI idle probing

 - avoid initializing out of bounds pages on sparse vmemmap systems with
   a gap at the start of their physical memory map

 - fix backtracing through exceptions

 - _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y

 - local labels in entry.S are now marked with ".L", which prevents them
   from trashing backtraces

 - a handful of fixes for SBI-based performance counters

* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  drivers/perf: riscv: Do not allow invalid raw event config
  drivers/perf: riscv: Return error for default case
  drivers/perf: riscv: Fix Platform firmware event data
  tools: selftests: riscv: Add test count for vstate_prctl
  tools: selftests: riscv: Add pass message for v_initval_nolibc
  riscv: use local label names instead of global ones in assembly
  riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
  riscv: stacktrace: fix backtracing through exceptions
  riscv: mm: Fix the out of bound issue of vmemmap address
  cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
  riscv: kprobes: Fix incorrect address calculation
  riscv: Fix sleeping in invalid context in die()
  riscv: module: remove relocation_head rel_entry member allocation
  riscv: selftests: Fix warnings pointer masking test