Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.16-rc4. It resolves a build
  error in the rtl8723bs driver for some versions of clang on arm64 when
  checking the frame size with -Wframe-larger-than.

  It has been in linux-next for a while now with no reported issues"

* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()

Pull tty/serial driver fixes from Greg KH:
 "Here are five small serial and tty and vt fixes for 6.16-rc4. Included
  in here are:

   - kerneldoc fixes for recent vt changes

   - imx serial driver fix

   - of_node sysfs fix for a regression

   - vt missing notification fix

   - 8250 dt bindings fix

  All of these have been in linux-next for a while with no reported issues"

* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
  serial: imx: Restore original RXTL for console to fix data loss
  serial: core: restore of_node information in sysfs
  vt: fix kernel-doc warnings in ucs_get_fallback()
  vt: add missing notification when switching back to text mode

Pull EDAC fix from Borislav Petkov:

 - Consider secondary address mask registers in amd64_edac in order to
   get the correct total memory size of the system

* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs

Pull i2c fixes from Wolfram Sang:

 - imx: fix SMBus protocol compliance during block read

 - omap: fix error handling path in probe

 - robotfuzz, tiny-usb: prevent zero-length reads

 - x86, designware, amdisp: fix build error when modules are disabled
   (agreed to go in via i2c)

 - scx200_acb: fix build error because of missing HAS_IOPORT

* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: scx200_acb: depends on HAS_IOPORT
  i2c: omap: Fix an error handling path in omap_i2c_probe()
  platform/x86: Use i2c adapter name to fix build errors
  i2c: amd-isp: Initialize unique adapter name
  i2c: designware: Initialize adapter name only when not set
  i2c: tiny-usb: disable zero-length read messages
  i2c: robotfuzz-osif: disable zero-length read messages
  i2c: imx: fix emulated smbus block read

Pull PCI fix from Bjorn Helgaas:

 - Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n &&
   CONFIG_PCIE_PTM=y (Manivannan Sadhasivam)

* tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled

Pull drm fixes from Dave Airlie:
 "Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe,
  i915 and a few misc bits. Seems about right for this time in the
  release cycle.

  core:
   - fix drm_writeback_connector_cleanup function signature
   - use correct HDMI audio bridge in drm_connector_hdmi_audio_init

  bridge:
   - SN65DSI86: fix HPD

  amdgpu:
   - Cleaner shader support for additional GFX9 GPUs
   - MES firmware compatibility fixes
   - Discovery error reporting fixes
   - SDMA6/7 userq fixes
   - Backlight fix
   - EDID sanity check

  i915:
   - Fix for SNPS PHY HDMI for 1080p@120Hz
   - Correct DP AUX DPCD probe address
   - Followup build fix for GCOV and AutoFDO enabled config

  xe:
   - Missing error check
   - Fix xe_hwmon_power_max_write
   - Move flushes
   - Explicitly exit CT safe mode on unwind
   - Process deferred GGTT node removals on device unwind"

* tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe: Process deferred GGTT node removals on device unwind
  drm/xe/guc: Explicitly exit CT safe mode on unwind
  drm/xe: move DPT l2 flush to a more sensible place
  drm/xe: Move DSB l2 flush to a more sensible place
  drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
  drm/i915: fix build error some more
  drm/xe/hwmon: Fix xe_hwmon_power_max_write
  drm/xe/display: Add check for alloc_ordered_workqueue()
  drm/amd/display: Add sanity checks for drm_edid_raw()
  drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
  drm/amdgpu/sdma7: add ucode version checks for userq support
  drm/amdgpu/sdma6: add ucode version checks for userq support
  drm/amd: Adjust output for discovery error handling
  drm/amdgpu/mes: add compatibility checks for set_hw_resource_1
  drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
  drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init()
  drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
  drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64
  drm: writeback: Fix drm_writeback_connector_cleanup signature

Pull Compute Express Link (CXL) fixes from Dave Jiang:
 "These fixes address a few issues in the CXL subsystem, including
  dealing with some bugs in the CXL EDAC and RAS drivers:

   - Fix return value of cxlctl_validate_set_features()

   - Fix min_scrub_cycle of a region miscaculation and add additional
     documentation

   - Fix potential memory leak issues for CXL EDAC

   - Fix CPER handler device confusion for CXL RAS

   - Fix using wrong repair type to check DRAM event record"

* tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/edac: Fix using wrong repair type to check dram event record
  cxl/ras: Fix CPER handler device confusion
  cxl/edac: Fix potential memory leak issues
  cxl/Documentation: Add more description about min/max scrub cycle
  cxl/edac: Fix the min_scrub_cycle of a region miscalculation
  cxl: fix return value in cxlctl_validate_set_features()

drm-misc-fixes for v6.16-rc4:
- Fix function signature of drm_writeback_connector_cleanup.
- Use correct HDMI audio bridge in drm_connector_hdmi_audio_init.
- Make HPD work on SN65DSI86.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/3dd1d5e1-73b6-4b0c-a208-f7d6235cf530@linux.intel.com

Pull ACPI fix from Rafael Wysocki:
 "Revert a commit that attempted to fix a memory leak in an error code
  path and introduced a different issue (Zhe Qiao)"

* tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"

Pull block fixes from Jens Axboe:

 - Fixes for ublk:
      - fix C++ narrowing warnings in the uapi header
      - update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
      - fix for the ublk ->queue_rqs() implementation, limiting a batch
        to just the specific task AND ring
      - ublk_get_data() error handling fix
      - sanity check more arguments in ublk_ctrl_add_dev()
      - selftest addition

 - NVMe pull request via Christoph:
      - reset delayed remove_work after reconnect
      - fix atomic write size validation

 - Fix for a warning introduced in bdev_count_inflight_rw() in this
   merge window

* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
  block: fix false warning in bdev_count_inflight_rw()
  ublk: sanity check add_dev input for underflow
  nvme: fix atomic write size validation
  nvme: refactor the atomic write unit detection
  nvme: reset delayed remove_work after reconnect
  ublk: setup ublk_io correctly in case of ublk_get_data() failure
  ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
  ublk: fix narrowing warnings in UAPI header
  selftests: ublk: don't take same backing file for more than one ublk devices
  ublk: build batch from IOs in same io_ring_ctx and io task